List View
One Page View
Name Engr. Dr. Yasar Amin
Designation Professor
Department Telecommunication Engineering (Taxila)
Highest Qualification Ph.D KTH
Specialization RFID and Microwave Engineering
Phone No 051-9047918
Cell No +92 (0) 347 786 7111
Fax No +92 (51) 9047 420
Email [email protected]

PhD  Electronic and Computer Systems

          Royal Institute of Technology, Stockholm, (Sweden) - 2013

MBA  Innovation and Growth

          Turku School of Economics, University of Turku, (Finland) - 2012

MSc  Electrical Engineering

          Specialization: System on Chip (SOC) Design

          Royal Institute of Technology, Stockholm, (Sweden) - 2003

BSc  Electrical Engineering

          Specialization: Telecommunication

          University of Engineering and Technology Taxila, (Pakistan) - 2001

Radio Frequency Identification - RFID
Wireless Sensor Networks - WSN
Internet of Things - (IoT)
Internet of Things - (IoT)Radio Frequency Identification - RFID
Wireless Sensor Networks - WSN
Internet of Things - (IoT)
Internet of Things - (IoT)Radio Frequency Identification - RFID
Wireless Sensor Networks - WSN
Internet of Things - (IoT)

Internation Journals

Y. Amin, Q. Chen, H. Tenhunen, and L.-R. Zheng, “Evolutionary versatile printable RFID antennas for "green" electronics,” Journal of Electromagnetic Waves and Applications, vol. 26, nos. 2-3, pp. 264-273, 2012. (ISSN 0920-5071)
Y. Amin, Q. Chen, H. Tenhunen, and L.-R. Zheng, “Performance-optimized quadrate bowtie RFID antennas for cost-effective and eco-friendly industrial applications,” Progress in Electromagnetics Research, vol. 126, pp. 49-64, 2012. (ISSN 1559-8985)
Y. Amin, Q. Chen, L.-R. Zheng, and H. Tenhunen, “Development and analysis of flexible UHF RFID antennas for "green" electronics,” Progress in Electromagnetics Research, vol. 130, pp. 1-15, 2012. (ISSN 1559-8985)
Y. Amin, R. K. Kanth, P. Liljeberg, Q. Chen, L.-R. Zheng, and H. Tenhunen, “Green wideband RFID tag antenna for supply chain applications,” IEICE Electronics Express, vol. 9, no. 24, pp. 1861-1866, 2012. (ISSN 1349-2543)
Y. Amin, Q. Chen, L.-R. Zheng, and H. Tenhunen, “Design and fabrication of wideband archimedean spiral antenna based ultra-low cost "green" modules for RFID sensing and wireless applications,” Progress in Electromagnetics Research, vol. 130, pp. 241-256, 2012. (ISSN 1559-8985)
Y. Amin, Q. Chen, L.-R. Zheng, and H. Tenhunen, "Green" wideband log-spiral antenna for RFID sensing and wireless applications,” Journal of Electromagnetic Waves and Applications, vol. 26, nos. 14-15, pp. 2043-2050, 2012. (ISSN 0920-5071)
Y. Amin, Q. Chen, L.-R. Zheng, and H. Tenhunen, “Two-arm sinuous antenna for RFID ubiquitous sensors and wireless applications,” Journal of Electromagnetic Waves and Applications, vol. 26, nos. 17-18, pp. 2365-2371, 2012. (ISSN 0920-5071)
Y. Amin, Y. Feng, Q. Chen, L.-R. Zheng, and H. Tenhunen, “RFID antenna humidity sensor co-design for USN applications,” IEICE Electronics Express, vol. 10, no. 4, pp. 20130003, 2013. (ISSN 1349-2543)
B. Shao, Y. Amin, Q. Chen, R. Liu and L-R Zheng, “Directly-printed packaging paper based chipless RFID tag with coplanar LC resonator,” IEEE Antennas and Wireless Propagation Letters, vol. 12 , pp, 325-328, 2013. (ISSN 1536-1225)
Y. Amin, B. Shao, Q. Chen, L.-R. Zheng, and H. Tenhunen, “Electromagnetic analysis of Radio Frequency Identification Antennas for green electronics,” Electromagnetics, vol. 33, no. 4, pp. 319-331, 2013. (ISSN 0272-6343)
B. Shao, Q. Chen, Y. Amin, R. Liu and L.-R. Zheng, “Chipless RFID tags fabricated by fully printing of metallic inks,” Annals of Telecommunications-Annales des Télécommunications, vol. 68, no. 7-8, 401-413, 2013. (ISSN 0003-4347)
B. Aslam, U. H. Khan, A. Habib, Y. Amin, and H. Tenhunen “Frequency signature chipless RFID tag with enhanced data capacity,” IEICE Electronics Express, vol. 12, no. 17, pp. 20150623, 2015. (ISSN 1349-2543)
T. Noor, A. Habib, Y. Amin, J. Loo, and H. Tenhunen. "High-density chipless RFID tag for temperature sensing," Electronics Letters, vol. 52, no. 8, pp. 620-622, 2016. (ISSN 0013-5194)
N. Javed, A. Habib, A. Akram, Y. Amin, and H. Tenhunen, "16-bit Frequency Signatured Directly Printable Tag for Organic Electronics." IEICE Electronics Express, 2016. (ISSN 1349-2543)
A. Raana, M. A. Azam, M. A. Ghazanfar, A. Javed, Y. Ameen, and U. Naeem, "C++ Bug Cub: Logical Bug Detection for C++ Code", The Nucleus, vol. 53 (1) 2016. (ISSN 0029-5698)
Y. Amin, H. Tenhunen, H. Jamal, L.-R. Zheng, X. Duo, “High Performance RF-Microwave Multilayer Integrated Components for Wireless Applications”, WSEAS Transactions Electronics, vol. 1, no. 4, pp. 639-645, October 2004. (ISSN 1109-9445) [HEC item no. 171].
R. K. Kanth, P. Liljeberg, H. Tenhunen, Y. Amin, Q. Chen, and L.-R. Zheng, “Comparative end-of-life study of polymer and paper based radio frequency devices,” International Journal of Environmental Protection (IJEP), vol. 2, no. 8, pp.1-5, 2012. (ISSN 2226-6437)
Y. Amin, J. Hållstedt, H. Tenhunen, and L.-R. Zheng, “Design of novel paper-based inkjet printed rounded corner bowtie antenna for RFID applications,” Sensors & Transducers Journal, vol. 115, no. 4, pp. 160-167, 2010. (ISSN 1726-5479)
Y. Amin, H. Tenhunen, L.-R. Zheng, “Blueprint and Integration of Vastly Efficient 802.11a WLAN Front-End”, WSEAS Transactions on Electronics, vol. 3, no. 4, Page 258, April 2006. (ISSN 1109-9445)
Y. Amin, A. Ali, M. Zafrullah, “Microsystems Packaging Roadmap for Next Generation (Wireless) Receivers”, WSEAS Transactions on Circuits and Systems, vol. 5, no. 5, Page 748, May 2006. (ISSN 1109-2734)
Y. Amin, M. Ali, U. Farooq, “Low Complexity Passives in MCM-D 4G Mobile Phones” WSEAS Transactions on Communications, vol. 6, no. 1, Page 217, January 2007. (ISSN 1109-2742)
M. K. Islam, A. Ali, Y. Amin, M. Zafrullah, “The Road to Efficient System Integration”, WSEAS Transactions on Communications 2006. (ISSN 1109-2742)
S. M. Chaudhry, Y. Amin, A. M. Chaudhry, and H. Jamal, "Real Time Embedded Controller Design for Safety Control of PWR Nuclear Power Reactor." WSEAS Transactions on Circuits and Systems 6, no. 4 (2007): 452-455.
  1. Y. Amin, Q. Chen, H. Tenhunen, and L.-R. Zheng, “Evolutionary versatile printable RFID antennas for "green" electronics,” Journal of Electromagnetic Waves and Applications, vol. 26, nos. 2-3, pp. 264-273, 2012. (ISSN 0920-5071)
  2. Y. Amin, Q. Chen, H. Tenhunen, and L.-R. Zheng, “Performance-optimized quadrate bowtie RFID antennas for cost-effective and eco-friendly industrial applications,” Progress in Electromagnetics Research, vol. 126, pp. 49-64, 2012. (ISSN 1559-8985)
  3. Y. Amin, Q. Chen, L.-R. Zheng, and H. Tenhunen, “Development and analysis of flexible UHF RFID antennas for "green" electronics,” Progress in Electromagnetics Research, vol. 130, pp. 1-15, 2012. (ISSN 1559-8985)
  4. Y. Amin, R. K. Kanth, P. Liljeberg, Q. Chen, L.-R. Zheng, and H. Tenhunen, “Green wideband RFID tag antenna for supply chain applications,” IEICE Electronics Express, vol. 9, no. 24, pp. 1861-1866, 2012. (ISSN 1349-2543)
  5. Y. Amin, Q. Chen, L.-R. Zheng, and H. Tenhunen, “Design and fabrication of wideband archimedean spiral antenna based ultra-low cost "green" modules for RFID sensing and wireless applications,” Progress in Electromagnetics Research, vol. 130, pp. 241-256, 2012. (ISSN 1559-8985)
  6. Y. Amin, Q. Chen, L.-R. Zheng, and H. Tenhunen, "Green" wideband log-spiral antenna for RFID sensing and wireless applications,” Journal of Electromagnetic Waves and Applications, vol. 26, nos. 14-15, pp. 2043-2050, 2012. (ISSN 0920-5071)
  7. Y. Amin, Q. Chen, L.-R. Zheng, and H. Tenhunen, “Two-arm sinuous antenna for RFID ubiquitous sensors and wireless applications,” Journal of Electromagnetic Waves and Applications, vol. 26, nos. 17-18, pp. 2365-2371, 2012. (ISSN 0920-5071)
  8. Y. Amin, Y. Feng, Q. Chen, L.-R. Zheng, and H. Tenhunen, “RFID antenna humidity sensor co-design for USN applications,” IEICE Electronics Express, vol. 10, no. 4, pp. 20130003, 2013. (ISSN 1349-2543)
  9. B. Shao, Y. Amin, Q. Chen, R. Liu and L-R Zheng, “Directly-printed packaging paper based chipless RFID tag with coplanar LC resonator,” IEEE Antennas and Wireless Propagation Letters, vol. 12 , pp, 325-328, 2013. (ISSN 1536-1225)
  10. Y. Amin, B. Shao, Q. Chen, L.-R. Zheng, and H. Tenhunen, “Electromagnetic analysis of Radio Frequency Identification Antennas for green electronics,” Electromagnetics, vol. 33, no. 4, pp. 319-331, 2013. (ISSN 0272-6343)
  11. B. Shao, Q. Chen, Y. Amin, R. Liu and L.-R. Zheng, “Chipless RFID tags fabricated by fully printing of metallic inks,” Annals of Telecommunications-Annales des Télécommunications, vol. 68, no. 7-8, 401-413, 2013. (ISSN 0003-4347)
  12. B. Aslam, U. H. Khan, A. Habib, Y. Amin, and H. Tenhunen “Frequency signature chipless RFID tag with enhanced data capacity,” IEICE Electronics Express, vol. 12, no. 17, pp. 20150623, 2015. (ISSN 1349-2543)
  13. T. Noor, A. Habib, Y. Amin, J. Loo, and H. Tenhunen. "High-density chipless RFID tag for temperature sensing," Electronics Letters, vol. 52, no. 8, pp. 620-622, 2016. (ISSN 0013-5194)
  14. N. Javed, A. Habib, A. Akram, Y. Amin, and H. Tenhunen, "16-bit Frequency Signatured Directly Printable Tag for Organic Electronics." IEICE Electronics Express, 2016. (ISSN 1349-2543)
  15. A. Raana, M. A. Azam, M. A. Ghazanfar, A. Javed, Y. Ameen, and U. Naeem, "C++ Bug Cub: Logical Bug Detection for C++ Code", The Nucleus, vol. 53 (1) 2016. (ISSN 0029-5698)
  16. Y. Amin, H. Tenhunen, H. Jamal, L.-R. Zheng, X. Duo, “High Performance RF-Microwave Multilayer Integrated Components for Wireless Applications”, WSEAS Transactions Electronics, vol. 1, no. 4, pp. 639-645, October 2004. (ISSN 1109-9445) [HEC item no. 171].
  17. R. K. Kanth, P. Liljeberg, H. Tenhunen, Y. Amin, Q. Chen, and L.-R. Zheng, “Comparative end-of-life study of polymer and paper based radio frequency devices,” International Journal of Environmental Protection (IJEP), vol. 2, no. 8, pp.1-5, 2012. (ISSN 2226-6437)
  18. Y. Amin, J. Hållstedt, H. Tenhunen, and L.-R. Zheng, “Design of novel paper-based inkjet printed rounded corner bowtie antenna for RFID applications,” Sensors & Transducers Journal, vol. 115, no. 4, pp. 160-167, 2010. (ISSN 1726-5479)
  19. Y. Amin, H. Tenhunen, L.-R. Zheng, “Blueprint and Integration of Vastly Efficient 802.11a WLAN Front-End”, WSEAS Transactions on Electronics, vol. 3, no. 4, Page 258, April 2006. (ISSN 1109-9445)
  20. Y. Amin, A. Ali, M. Zafrullah, “Microsystems Packaging Roadmap for Next Generation (Wireless) Receivers”, WSEAS Transactions on Circuits and Systems, vol. 5, no. 5, Page 748, May 2006. (ISSN 1109-2734)
  21. Y. Amin, M. Ali, U. Farooq, “Low Complexity Passives in MCM-D 4G Mobile Phones” WSEAS Transactions on Communications, vol. 6, no. 1, Page 217, January 2007. (ISSN 1109-2742)
  22. M. K. Islam, A. Ali, Y. Amin, M. Zafrullah, “The Road to Efficient System Integration”, WSEAS Transactions on Communications 2006. (ISSN 1109-2742)
  23. S. M. Chaudhry, Y. Amin, A. M. Chaudhry, and H. Jamal, "Real Time Embedded Controller Design for Safety Control of PWR Nuclear Power Reactor." WSEAS Transactions on Circuits and Systems 6, no. 4 (2007): 452-455.
 
International Conferences
 
A. Habib, M. A. Azam, Y. Amin, and H. Tenhunen, "Chipless Slot Resonators for IoT System Identification", IEEE International Conference on Electro/Information Technology, 2016. USA
R. K. Kanth, P. Liljeberg, H. Tenhunen, L. R. Zheng, Y . Amin, and H . Kumar, “Study on sustainability and life cycle assessment of RFID antenna,” in Proceedings of the 2014 International Conference on Environmental Engineering and Computer Application (ICEECA 2014), Hong Kong, pp. 369–372.
Y. Amin, R. K. Kanth, P. Liljeberg, A. Akram, Q. Chen, L.-R. Zheng, and H. Tenhunen, "Printable RFID antenna with embedded sensor and calibration functions," in Proceedings of Progress In Electromagnetics Research Symposium (PIERS 2013), Sweden, pp. 567-570.
R. K. Kanth, P. Liljeberg, H. Tenhunen, Y. Amin, Q. Chen, A. Janstch, L.-R. Zheng, and H. Kumar, "Design of sierpinski grid patch antenna for multiband application", in Proceedings of Progress In Electromagnetics Research Symposium (PIERS 2013), Sweden, pp. 577-582.
Y. Amin, Q. Chen, B. Shao, J. Hållstedt, H. Tenhunen, and L.-R. Zheng, “Design and analysis of efficient and compact antenna for paper based UHF RFID tags,” in IEEE International Symposium on Antennas, Propagation and EM Theory (ISAPE 2008), China, pp. 62-65.
Y. Amin, S. Prokkola, B. Shao, J. Hållstedt, H. Tenhunen, and L.-R. Zheng, “Inkjet printed paper based quadrate bowtie antennas for UHF RFID tags,” in 11th IEEE International Conference on Advanced Communication Technology (ICACT 2009), Korea, pp. 109-112.
Y. Amin, B. Shao, J. Hållstedt, S. Prokkola, H. Tenhunen, and L.-R. Zheng, “Design and characterization of efficient flexible UHF RFID tag antennas,” in IEEE European Conference on Antennas and Propagation (EUCAP 2009), Germany, pp. 2784-2786.
B. Shao, Q. Chen, Y. Amin, J. Hållstedt, R. Liu, H. Tenhunen, and L.-R.~Zheng, “Process-dependence of inkjet printed folded dipole antenna for 2.45GHz RFID tags,” in IEEE European Conference on Antennas and Propagation (EUCAP 2009), Germany, pp. 2338-2339.
Y. Amin, S. Prokkola, B. Shao, J. Hållstedt, Q. Chen, H. Tenhunen, and L.-R. Zheng, “Low cost paper based bowtie tag antenna for high performance UHF RFID applications,” in Proceedings of Nanotech 2009, USA, vol. 1, pp. 538-541.
Y. Amin, J. Hållstedt, S. Prokkola, H. Tenhunen, and L.-R. Zheng, “Robust flexible high performance UHF RFID tag antenna,” in IEEE Electronic Packaging Technology Conference (EPTC 2009), Singapore, pp. 235-239.
B. Shao, Q. Chen, Y. Amin, D. S. Mendoza, R. Liu and L.-R. Zheng, “An ultra-low-cost RFID tag with 1.67Gbps data rate by ink-jet printing on paper substrate,” in IEEE Solid State Circuits Conference (A-SSCC 2010), China, pp. 1-4.
R. K. Kanth, W. Ahmad, Y. Amin, P. Liljeberg, L.-R. Zheng, and H. Tenhunen, “Analysis, design and development of novel, low profile 2.487GHz microstrip antenna,” in IEEE Symposium on Antenna Technology and Applied Electromagnetics & the American Electromagnetics Conference 2010, Canada, pp. 1-4.
R. K. Kanth, P. Liljeberg, H. Tenhunen, H. Kumar, Y. Amin, Q. Chen and Li-Rong Zheng, “Quantifying the environmental footprint of rigid substrate printed antenna,” in IEEE International conference on Technology and Society in Aisa (T&SA) 2012, Singapore, pp. 1-5.
R. K. Kanth, P. Liljeberg, H. Tenhunen, Q. Wan, Y. Amin, B. Shao, Q. Chen, L. R. Zheng, H. Kumar “Comparative Study on End-of-Life of Polymer and Paper Based Radio Frequency Devices,” Proceedings of 3rd International Conference on Information Science and Engineering (ICISE) 2011, pp. 3202-3205
R. K. Kanth, P. Liljeberg, H. Tenhunen, Q. Wan, Y. Amin, B. Shao, Q. Chen, L.-R. Zheng, and H. Kumar, “Evaluating sustainability, environmental assessment and toxic emissions during manufacturing process of RFID based systems,” in IEEE 9th International Symposium on Dependable, Autonomic and Secure Computing (DASC 2011), Australia, pp. 1066-1071.
Y. Amin, H. Tenhunen, L.-R. Zheng, X. Duo, “Chip Package Co-design of Receiver Front-End for 5GHz Wireless LAN Applications”, IMAPS Advanced Technology Workshop (ATW) on Passive Integration, Florida, USA, 24-26 January 2005. 
Y. Amin, H. Tenhunen, H. Jamal, L.-R. Zheng, X. Duo, “High performance RF Microwave Multilayer Integrated Components for Wireless Applications”, WSEAS Conference on Electronics, Hardware, Wireless and Optical Communications, Salzburg, Austria, 13-15 February, 2005.
Y. Amin, H. Tenhunen, H. Jamal, L.-R. Zheng, "Design of Efficient Filter on Liquid Crystal Polymer Substrate for 5 GHz Wireless LAN Applications", 4th WSEAS Conference on Telecommunications and Informatics, Prague, Czech Republic, 13-15 March 2005. 
Y. Amin, H. Tenhunen, L.-R. Zheng, X. Duo, “SoP Design on Liquid Crystal Polymer Substrate for 5 GHz RF Receiver Front-End Module”, IMAPS Device Packaging Conference, Scottsdale, Arizona, USA, 13-16 March 2005. 
Y. Amin, H. Tenhunen, L.-R. Zheng, X. Duo, S. Amin, “RF-Microwave High Performance Passives for Wireless LAN Applications”, IASTED International Conference on Networks and Communication Systems (NCS 2005), Krabi, Thailand, 18-20 April, 2005. 
Y. Amin, H. Tenhunen, H. Jamal, L.-R. Zheng, X. Duo, “Chip-Package Codesign of Receiver Front End Modules for RF/Wireless Applications”, 2005 IEEE/ACES International Conference on Wireless Communications and Applied Computational Electromagnetics, Honolulu, Hawaii, USA, 3-7 April, 2005. 
Y. Amin, H. Tenhunen, L.-R. Zheng, X. Duo, S. Amin, “Chip Package Co-design of 5 GHz RF Receiver Front-End Using Multichip Module Technology”, 2005 NSTI Nanotechnology Conference and Trade Show, Anaheim, California, USA, 8-12 May, 2005.
Y. Amin, H. Tenhunen, H. Jamal, L.-R. Zheng, “Design and development of High Performance Receiver Front End Modules for RF/Wireless Applications”, 2005 4GMF Annual Conference, San Diego, California, USA, 11-13 July, 2005. 
Y. Amin, H. Tenhunen, L.-R. Zheng, “Blueprint and Integration of Vastly Efficient 802.11a WLAN Front-End”, WSEAS AEE, ACMOS, MINO '06 Prague, Czech Republic, March 12-14, 2006. 
Y. Amin, A. Ali, M. Zafrullah, “Microsystems Packaging Roadmap for Next Generation (Wireless) Receivers”, WSEAS Conferences IMCAS, ROCOM, MUSP and ACOS Hangzhou, China, April 16-18, 2006.
Y. Amin, M. Ali, U. Farooq, “Low Complexity Passives in MCM-D 4G Mobile Phones”, 4th WSEAS International Conference on Applied Electromagnetics, Wireless and Optical Communications, Venice, Italy, November 20-22, 2006.
S. M. Chaudhry, F. Abbas, Y. Amin, A. M. Chaudhry, and H. Jamal. "A review of transduction techniques used in acoustics echo cancellation." In Proceedings of the 8th WSEAS international conference on Acoustics & music: theory & applications, pp. 31-36. World Scientific and Engineering Academy and Society (WSEAS), 2007.
Y. Amin, M. Zafrullah, H. Zafar, “SIP design and analysis of 5GHz Wireless LAN receiver Front-Ends”, ENCASIT GOOD-DIE International Workshop,  Portsmouth, UK,  June 25 -26 2007. 
Y. Amin, X. Duo, L.-R. Zheng, H. Tenhunen, “Integration of Passives for Receiver Front End of 5GHz Wireless LAN Applications”, NCET 2004, jointly organized by SZABIST, ACM, and IEEE, Karachi, Pakistan, 18-19 December 2004. 
A. Ali, M. Zafrullah, Y. Amin, “Design and Comparison of Various Passive Components of a 5 GHz Wireless LAN Applications”, NCET 2004, jointly organized by SZABIST, ACM, and IEEE, Karachi, Pakistan, 18-19 December 2004.
  1. A. Habib, M. A. Azam, Y. Amin, and H. Tenhunen, "Chipless Slot Resonators for IoT System Identification", IEEE International Conference on Electro/Information Technology, 2016. USA
  2. R. K. Kanth, P. Liljeberg, H. Tenhunen, L. R. Zheng, Y . Amin, and H . Kumar, “Study on sustainability and life cycle assessment of RFID antenna,” in Proceedings of the 2014 International Conference on Environmental Engineering and Computer Application (ICEECA 2014), Hong Kong, pp. 369–372.
  3. Y. Amin, R. K. Kanth, P. Liljeberg, A. Akram, Q. Chen, L.-R. Zheng, and H. Tenhunen, "Printable RFID antenna with embedded sensor and calibration functions," in Proceedings of Progress In Electromagnetics Research Symposium (PIERS 2013), Sweden, pp. 567-570.
  4. R. K. Kanth, P. Liljeberg, H. Tenhunen, Y. Amin, Q. Chen, A. Janstch, L.-R. Zheng, and H. Kumar, "Design of sierpinski grid patch antenna for multiband application", in Proceedings of Progress In Electromagnetics Research Symposium (PIERS 2013), Sweden, pp. 577-582.
  5. Y. Amin, Q. Chen, B. Shao, J. Hållstedt, H. Tenhunen, and L.-R. Zheng, “Design and analysis of efficient and compact antenna for paper based UHF RFID tags,” in IEEE International Symposium on Antennas, Propagation and EM Theory (ISAPE 2008), China, pp. 62-65.
  6. Y. Amin, S. Prokkola, B. Shao, J. Hållstedt, H. Tenhunen, and L.-R. Zheng, “Inkjet printed paper based quadrate bowtie antennas for UHF RFID tags,” in 11th IEEE International Conference on Advanced Communication Technology (ICACT 2009), Korea, pp. 109-112.
  7. Y. Amin, B. Shao, J. Hållstedt, S. Prokkola, H. Tenhunen, and L.-R. Zheng, “Design and characterization of efficient flexible UHF RFID tag antennas,” in IEEE European Conference on Antennas and Propagation (EUCAP 2009), Germany, pp. 2784-2786.
  8. B. Shao, Q. Chen, Y. Amin, J. Hållstedt, R. Liu, H. Tenhunen, and L.-R.~Zheng, “Process-dependence of inkjet printed folded dipole antenna for 2.45GHz RFID tags,” in IEEE European Conference on Antennas and Propagation (EUCAP 2009), Germany, pp. 2338-2339.
  9. Y. Amin, S. Prokkola, B. Shao, J. Hållstedt, Q. Chen, H. Tenhunen, and L.-R. Zheng, “Low cost paper based bowtie tag antenna for high performance UHF RFID applications,” in Proceedings of Nanotech 2009, USA, vol. 1, pp. 538-541.
  10. Y. Amin, J. Hållstedt, S. Prokkola, H. Tenhunen, and L.-R. Zheng, “Robust flexible high performance UHF RFID tag antenna,” in IEEE Electronic Packaging Technology Conference (EPTC 2009), Singapore, pp. 235-239.
  11. B. Shao, Q. Chen, Y. Amin, D. S. Mendoza, R. Liu and L.-R. Zheng, “An ultra-low-cost RFID tag with 1.67Gbps data rate by ink-jet printing on paper substrate,” in IEEE Solid State Circuits Conference (A-SSCC 2010), China, pp. 1-4.
  12. R. K. Kanth, W. Ahmad, Y. Amin, P. Liljeberg, L.-R. Zheng, and H. Tenhunen, “Analysis, design and development of novel, low profile 2.487GHz microstrip antenna,” in IEEE Symposium on Antenna Technology and Applied Electromagnetics & the American Electromagnetics Conference 2010, Canada, pp. 1-4.
  13. R. K. Kanth, P. Liljeberg, H. Tenhunen, H. Kumar, Y. Amin, Q. Chen and Li-Rong Zheng, “Quantifying the environmental footprint of rigid substrate printed antenna,” in IEEE International conference on Technology and Society in Aisa (T&SA) 2012, Singapore, pp. 1-5.
  14. R. K. Kanth, P. Liljeberg, H. Tenhunen, Q. Wan, Y. Amin, B. Shao, Q. Chen, L. R. Zheng, H. Kumar “Comparative Study on End-of-Life of Polymer and Paper Based Radio Frequency Devices,” Proceedings of 3rd International Conference on Information Science and Engineering (ICISE) 2011, pp. 3202-3205
  15. R. K. Kanth, P. Liljeberg, H. Tenhunen, Q. Wan, Y. Amin, B. Shao, Q. Chen, L.-R. Zheng, and H. Kumar, “Evaluating sustainability, environmental assessment and toxic emissions during manufacturing process of RFID based systems,” in IEEE 9th International Symposium on Dependable, Autonomic and Secure Computing (DASC 2011), Australia, pp. 1066-1071.
  16. Y. Amin, H. Tenhunen, L.-R. Zheng, X. Duo, “Chip Package Co-design of Receiver Front-End for 5GHz Wireless LAN Applications”, IMAPS Advanced Technology Workshop (ATW) on Passive Integration, Florida, USA, 24-26 January 2005. 
  17. Y. Amin, H. Tenhunen, H. Jamal, L.-R. Zheng, X. Duo, “High performance RF Microwave Multilayer Integrated Components for Wireless Applications”, WSEAS Conference on Electronics, Hardware, Wireless and Optical Communications, Salzburg, Austria, 13-15 February, 2005.
  18. Y. Amin, H. Tenhunen, H. Jamal, L.-R. Zheng, "Design of Efficient Filter on Liquid Crystal Polymer Substrate for 5 GHz Wireless LAN Applications", 4th WSEAS Conference on Telecommunications and Informatics, Prague, Czech Republic, 13-15 March 2005. 
  19. Y. Amin, H. Tenhunen, L.-R. Zheng, X. Duo, “SoP Design on Liquid Crystal Polymer Substrate for 5 GHz RF Receiver Front-End Module”, IMAPS Device Packaging Conference, Scottsdale, Arizona, USA, 13-16 March 2005. 
  20. Y. Amin, H. Tenhunen, L.-R. Zheng, X. Duo, S. Amin, “RF-Microwave High Performance Passives for Wireless LAN Applications”, IASTED International Conference on Networks and Communication Systems (NCS 2005), Krabi, Thailand, 18-20 April, 2005. 
  21. Y. Amin, H. Tenhunen, H. Jamal, L.-R. Zheng, X. Duo, “Chip-Package Codesign of Receiver Front End Modules for RF/Wireless Applications”, 2005 IEEE/ACES International Conference on Wireless Communications and Applied Computational Electromagnetics, Honolulu, Hawaii, USA, 3-7 April, 2005. 
  22. Y. Amin, H. Tenhunen, L.-R. Zheng, X. Duo, S. Amin, “Chip Package Co-design of 5 GHz RF Receiver Front-End Using Multichip Module Technology”, 2005 NSTI Nanotechnology Conference and Trade Show, Anaheim, California, USA, 8-12 May, 2005.
  23. Y. Amin, H. Tenhunen, H. Jamal, L.-R. Zheng, “Design and development of High Performance Receiver Front End Modules for RF/Wireless Applications”, 2005 4GMF Annual Conference, San Diego, California, USA, 11-13 July, 2005. 
  24. Y. Amin, H. Tenhunen, L.-R. Zheng, “Blueprint and Integration of Vastly Efficient 802.11a WLAN Front-End”, WSEAS AEE, ACMOS, MINO '06 Prague, Czech Republic, March 12-14, 2006. 
  25. Y. Amin, A. Ali, M. Zafrullah, “Microsystems Packaging Roadmap for Next Generation (Wireless) Receivers”, WSEAS Conferences IMCAS, ROCOM, MUSP and ACOS Hangzhou, China, April 16-18, 2006.
  26. Y. Amin, M. Ali, U. Farooq, “Low Complexity Passives in MCM-D 4G Mobile Phones”, 4th WSEAS International Conference on Applied Electromagnetics, Wireless and Optical Communications, Venice, Italy, November 20-22, 2006.
  27. S. M. Chaudhry, F. Abbas, Y. Amin, A. M. Chaudhry, and H. Jamal. "A review of transduction techniques used in acoustics echo cancellation." In Proceedings of the 8th WSEAS international conference on Acoustics & music: theory & applications, pp. 31-36. World Scientific and Engineering Academy and Society (WSEAS), 2007.
  28. Y. Amin, M. Zafrullah, H. Zafar, “SIP design and analysis of 5GHz Wireless LAN receiver Front-Ends”, ENCASIT GOOD-DIE International Workshop,  Portsmouth, UK,  June 25 -26 2007. 

National Conferences

  1. Y. Amin, X. Duo, L.-R. Zheng, H. Tenhunen, “Integration of Passives for Receiver Front End of 5GHz Wireless LAN Applications”, NCET 2004, jointly organized by SZABIST, ACM, and IEEE, Karachi, Pakistan, 18-19 December 2004. 
  2. A. Ali, M. Zafrullah, Y. Amin, “Design and Comparison of Various Passive Components of a 5 GHz Wireless LAN Applications”, NCET 2004, jointly organized by SZABIST, ACM, and IEEE, Karachi, Pakistan, 18-19 December 2004.
  1. Implantable RFID tag antenna for biomedical assessment of patients. 
  2. Wearable RFID tag antenna for pervasive healthcare applications.
  3. Chipless RFID tags for low-cost identification.
  4. Application of RFID tag antennas in cancerous cell diagnosis.
  5. Low profile RFID tag antennas for challenging environments.
  6. Dual band UHF-RFID/WLAN circularly polarized antenna for portable RFID readers.
  7. UHF RFID tag antennas for use on perishable goods and human bodies.
  8. Chipless RFID tag for IoT applications. 
  9. Simple micro strip band stop resonators for chipless RFID tags. 
  10. Chipless RFID tag with improved RCS response. 
  11. A fully printed passive chipless RFID tag. 
  12. High-density chipless RFID tag for temperature sensing. 
  13. 16-bit frequency signatured directly printable tag for organic electronics. 
  14. Inkjet-Printed ASK reconfigurable chipless RFID tag for sensor applications.
  15. Chipless slot resonators for IoT sensor applications.
  16. Low cost printable RFID humidity sensor for environment monitoring.
  17. A single layer compact HF-UHF dual band RFID tag antenna.
  18. Efficient object identification and localization using RFID tags.
  19. Displacement sensing by passive UHF RFID tags
  20. Flexible circularly polarized RFID tag antenna
  21. RFID tag antenna with circular polarization for metallic objects
Mar. 2015 – till Date
Chairman
Telecommunication Engineering Department,
University of Engineering and Technology Taxila, Pakistan
 
Mar. 2015 – till Date 
Associate Professor
Telecommunication Engineering Department,
University of Engineering and Technology Taxila, Pakistan
 
June 2015 – till Date
Project Director
Provision of Basic Infrastructure and Establishment of Telecommunication Engg. Deptt at UET Taxila, Pakistan
 
Nov. 2011 – Feb. 2013
PhD Researcher 
Royal Institute of Technology (KTH), Sweden
 
Jan. 2005 – Nov. 2007
Director Postgraduate Studies   
Computer & Software Engineering Department, University of Engineering and Technology Taxila, Pakistan
 
Sep. 2005 – Nov. 2007
Director Electronic Systems Laboratory
University of Engineering and Technology Taxila, Pakistan
 
Jan. 2004 – Mar. 2015 
Assistant Professor
University of Engineering  and Technology Taxila, Pakistan
 
Sep. 2003 – Jan. 2004   
Program Coordinator/Lecturer   
COMSATS Institute of Information Technology, Islamabad, Pakistan
 
Aug. 2001 – May 2003   
Research Assistant   
Royal Institute of Technology (KTH), Sweden
Chairman
          Telecommunication Engineering Department,
          University of Engineering and Technology Taxila, Pakistan
          (Mar. 2015 – till Date)
 
Director Postgraduate Studies   
          Computer & Software Engineering Department,
          University of Engineering and Technology Taxila, Pakistan
          (Jan. 2005 – Nov. 2007)
 
Director
          Electronic Systems Laboratory, Computer Engineering Department,
          University of Engineering and Technology Taxila, Pakistan
          (Sep. 2005 – Nov. 2007)
 
Program Coordinator
          Telecommunication Engineering Department,
          COMSATS Institute of Information Technology, Islamabad, Pakistan
          (Sep. 2003 – Jan. 2004)  
Project Director (HEC PC-1)
          Provision of Basic Infrastructure and Establishment of Telecommunication
          Engineering Department at UET Taxila, Pakistan
          (Jun. 2015 – till Date)
Project Director
          Provision of Basic Infrastructure and Establishment of Telecommunication
          Engineering Department at UET Taxila, Pakistan
          (Jun. 2015 – till Date)
Project Director
          Provision of Basic Infrastructure and Establishment of Telecommunication
          Engineering Department at UET Taxila, Pakistan
          (Jun. 2015 – till Date)
Jan. 2004 – till Date
Faculty Member
 
Nov. 2011 – Feb. 2013
PhD Researcher 
 
Sep. 2003 – Jan. 2004   
Faculty Member   
 
Aug. 2001 – Aug. 2003   
Research Assistant   
Counselor
          IEEE UET Taxila Branch (2005-2007).
 
Faculty Sponsor
          ACM Student Chapter,
          University of Engineering and Technology Taxila Pakistan (till date).
 
Member
          Amnesty International
Faculty Sponsor ACM Student Chapter, University of Engineering and Technology Taxila Pakistan.Counselor IEEE UET Taxila Branch.
Faculty Sponsor ACM Student Chapter, University of Engineering and Technology Taxila Pakistan.
Professional (Life Time) Member of PEC (Pakistan Engineering Council)
Member IEEE (The Institute of Electrical and Electronics Engineers)
Member IEICE (The Institute of Electronics, Information and Communication Engineers).
Member ACM (Association for Computing Machinery)
          Professional (Life Time) Member
          Pakistan Engineering Council
 
          The Institute of Electrical and Electronics Engineers (USA)
 
          The Institution of Engineering and Technology (UK)
          The Institute of Electronics, Information and Communication Engineers (Japan)
 
          Association for Computing Machinery (USA)
          Applied Computational Electromagnetics Society (USA)
 
          International Telecommunication Union 
BSc Engineering Courses
  1. Wave Propagation & Antennas
  2. VLSI Systems
  3. VLSI System Design
  4. Circuit Analysis
  5. Electronic Circuits
MSc Engineering Courses
  1. Radio Frequency Integrated Circuit: Technology & Design
  2. Mixed Signal Design
  3. Digital Integrated Circuit Design
  4. Advanced Digital Design
PhD Engineering Courses
  1. Research Mathodologies
  2. Prinable Antennas for Embedded Sensors
  3. RF Circuit Design
Chairman
Telecommunication Engineering Department,
University of Engineering and Technology Taxila, Pakistan
Chairman
Telecommunication Engineering Department,
University of Engineering and Technology Taxila, Pakistan
Chairman
Telecommunication Engineering Department,
University of Engineering and Technology Taxila, Pakistan
Chairman (Mar. 2015 – till Date)
Telecommunication Engineering Department,
University of Engineering and Technology Taxila, Pakistan
Mar. 2015 – till Date
Chairman
Telecommunication Engineering Department,
University of Engineering and Technology Taxila, Pakistan
 
Mar. 2015 – till Date 
Associate Professor
Telecommunication Engineering Department,
University of Engineering and Technology Taxila, Pakistan
 
June 2015 – till Date
Project Director
Provision of Basic Infrastructure and Establishment of Telecommunication Engg. Deptt at UET Taxila, Pakistan
 
Nov. 2011 – Feb. 2013
PhD Researcher 
Royal Institute of Technology (KTH), Sweden
 
Jan. 2005 – Nov. 2007
Director Postgraduate Studies   
Computer & Software Engineering Department, University of Engineering and Technology Taxila, Pakistan
 
Sep. 2005 – Nov. 2007
Director Electronic Systems Laboratory
University of Engineering and Technology Taxila, Pakistan
 
Jan. 2004 – Mar. 2015 
Assistant Professor
University of Engineering  and Technology Taxila, Pakistan
 
Sep. 2003 – Jan. 2004   
Program Coordinator/Lecturer   
COMSATS Institute of Information Technology, Islamabad, Pakistan
 
Aug. 2001 – May 2003   
Research Assistant   
Associate Professor          
          Telecommunication Engineering Department,
          University of Engineering and Technology Taxila, Pakistan
          (Mar. 2015 – till Date) 
 
PhD Researcher         
          Royal Institute of Technology (KTH), Sweden
          (Nov. 2011 – Feb. 2013)
 
Assistant Professor          
          University of Engineering  and Technology Taxila, Pakistan
          (Jan. 2004 – Mar. 2015)
 
Lecturer             
          COMSATS Institute of Information Technology, Islamabad, Pakistan
          (Sep. 2003 – Jan. 2004)
 
Research Assistant          
          Royal Institute of Technology (KTH), Sweden
          (Aug. 2001 – Aug. 2003)
  • ITU International Telecommunication Union 
  • Amnesty International
 
As Reviewer
  • Progress In Electromagnetics Research (PIER)
  • IEEE Antennas and Wireless Propagation Letters 
  • Radioengineering
  • International Journal of Electronics
  • IEEE Transactions on Biomedical Engineering
Certificate of Participation in IEEE CSIDC 2006, on 1 June 2006 in Washington, DC. USA Best Journal Paper Award 2009 in Sensors & Transducers Journal.
Member Operations Committee of 17th ICM 2005 organized by IEEE, University of Engineering and Technology Taxila and University of Waterloo.
Keynote Speaker at Tektronix Seminar 2005, Islamabad.
Counselor IEEE UET Taxila Branch.
Faculty Sponsor ACM Student Chapter, University of Engineering and Technology Taxila Pakistan.
Certificate of Excellent Performance in the BSc. Final Year by IEE (now named as IET).
Certificate of Participation in IEEE CSIDC 2006, on 1 June 2006 in Washington, DC. USA 

Member Operations Committee

          17th ICM 2005 organized by IEEE and University of Engineering and Technology Taxila and University of Waterloo.

 

Member Organizing Committee

          Symposium on "Re-Designing Engineering Education in Pakistan" organized by University of Engineering and Technology Taxila on October 19, 2015 at Islamabad Club.

PROFESSIONAL COURSES

Stanford University (USA)

  1. Electronic Design Automation
  2. Non-Volatile Memory Technology, Design, Applications, and Future Trends
  3. Low-Power Design and Power Management in Integrated Circuits
  4. Power-Optimized Operational Transconductance Amplifier Design
  5. Wireless System Design
  6. Wireless Transceiver Building
  7. WLAN Transceiver Design
  8. Digital Signal Processors: Fundamentals, Design and Applications
  9. Process Integration Strategies: 90 nm in 2004 to 30 nm in 2010
  10. VLSI Digital Design
  11. RF-CMOS and SiGe-BiCMOS Technologies for RF Analog and Mixed-Signal Integrated Circuits
  12. Microelectronics to Nanoelectronics
  13. Nanoelectronics: Electrons in Reduced Dimensions and Future Devices
  14. 3-Dimensional ICs: Motivation, Performance Analysis and Technology 
  15. Materials, Processing and Characterization for Substrates and Packaging

MIT - Massachusetts Institute of Technology (USA)

  1. Internet of Things: Roadmap to a Connected World
  2. Entrepreneurial Negotiations: The MIT Way

ESBRI & Vinnova (Sweden)

  • From Research to Business
Participated in series of weekly seminars
 
  1. Design and Calibration of Integrated PLL Frequency Synthesizers, Apr. 25, 2008
  2. High power amplification devices for wireless infrastructures, May 09, 2008
  3. Calibration of down-conversion mixers, May 16, 2008
  4. NETTAN – A tool for Analysis and Iterative Design of Analog, Digital- and Switched-Capacitor Filters, May 23, 2008
  5. Antenna Miniturization Influence on the Performance of Impulse Radio UWB system, May 30, 2008
  6. Performance-driven Synthesis Methodology and its Application to Operational Amplifier Design, Jun. 05, 2008
  7. ECS/ICT computer environment, Jun. 12, 2008
  8. A novel wearable ECG monitoring system based on a Single Active-Cable and smart electrodes, Jun. 19, 2008
  9. A Current Shaping Technique to Lower Phase Noise in LC Oscillators, Aug. 28, 2008
  10. High Frequency Characterization and Modelling of Inkjet Printed Interconnects on Flexible Substrate for Low-Cost RFID Applications, Aug. 28, 2008
  11. Banking Terminal Test Automation, Sept. 5, 2008
  12. ICECS 2008 Highlights, Sept. 5, 2008
  13. Infineon Technologies, Power management for mobile applications, Sept. 10, 2008
  14. Switch theory: where logic synthesis meets physical implementation, Sept. 15, 2008
  15. ICUWB 2008 Highlights, Sept. 16, 2008
  16. Printed electronics - a review on today’s state of the art, Sept. 23, 2008
  17. Ericsson AB, Power Amplifier Low Memory Effect Low Frequency Gain Peak and Isolated Temperature Tracking, Oct. 03, 2008
  18. Energy Detection UWB Receiver for RFID and WSN Applications, Oct. 10, 2008
  19. RF Transmitter Architecture Investigation for Power Efficient Mobile WiMAX Applications, Oct. 30, 2008
  20. Ubiquitous Intelligence in Paper and Packaging, Nov. 07, 2008
  21. Design and Analysis of Efficient and Compact Antenna for Paper Based UHF RFID Tags, Nov. 25, 2008
  22. ISSOC08 and Norchip 08 Highlights, Dec. 02, 2008
  23. Synchronization and Detection of Energy Collection UWB Receiver for Wireless Sensor Network, Dec. 08, 2008
  24. Force Sensing in Digital Pens, Dec. 18, 2008
  25. Investigate a discrete JFET preamplifier in sensor circuit, Dec. 18, 2008
  26. Printed Electronics USA highlights, Dec. 18, 2008
  27. A Remote-Powered RFID Tag with 10Mb/s UWB Uplink and -18.5dBm-Sensitivity UHF Downlink in 0.18µm CMOS, Feb. 05, 2009
  28. FPGA Implementation of UHF RFID Reader Protocol, Feb. 06, 2009
  29. All Digital PLL Analysis and Implementation, Feb. 06, 2009
  30. Design and Development of a JPEG hardware decoder for FPGA's, Feb. 13, 2009
  31. Printed Electronics for Low-Cost Tags and Sensors, Mar. 07, 2009
  32. Quadrate Bowtie Antennas for UHF RFID Tags, Mar. 13, 2009
  33. Novacentrix, High-Speed Room Temperature Curing of Functional Inks, Apr. 10, 2009
  34. Auto-ID Lab and RFID Research at Fudan University China, May 03, 2009
  35. Implementation of Coding and Interleaving on a Wireless Communication System, May 29, 2009
  36. Digital filter for high resolution ECG signal, Jun. 05, 2009
  37. A low power successive approximation analog to digital converter for wireless sensor, Jun. 10, 2009
  38. Nanopackaging, Jul. 20, 2009
  39. Investigation of intrabody communication channel characteristics, Oct. 09, 2009
  40. A Printable Passive Wireless Sensor for Intelligent Packaging, Oct. 16, 2009
  41. Implementation of Low Pass Filter in GNSS Baseband Receiver, Oct. 23, 2009
  42. A Highly Programmable Timing Circuit for IR-UWB Receiver, Oct. 30, 2009
  43. All Digital PLL (ADPLL) Design for Digital Polar Transmitters, Nov. 04, 2009
  44. Process automation with embedded high speed control, Nov. 06, 2009
  45. Encapsulation Technology For Organic Electronic Devices, Dec. 15, 2009
  46. Solution processable nanomaterials for printed sensors, Jan. 15, 2010
  47. Printed Electronics USA 2009, Jan. 22, 2010
  48. Questions for companies in the market for printed electronics, Jan. 22, 2010
  49. Printed displays, Jan. 29, 2010
  50. A Fully Inkjet Printable Passive Chipless RFID Tag Device on Paper Substrate, Feb. 12, 2010
  51. Introduction to electrical interconnection methods, Feb. 19, 2010
  52. Overview of printing methods, inks and paper/board surface properties, Feb. 26, 2010
  53. I-UWB Link Evaluation for Low Data Rate and Short Range Applications, Mar. 5, 2010
  54. A Wearable Healthcare System Based on Fully Integrated Intelligent Electrodes, Mar. 12, 2010
  55. Interactive Packaging Solutions Based on RFID and CDM, Mar. 26, 2010
  56. Digital Printing Center, Mar. 26, 2010
  57. Market study for printed electronics and packaging, Apr. 16, 2010
  58. A Switch Mode Resonating H-Bridge Polar Transmitter using RF S? Modulation, Apr. 16, 2010
  59. Spray-Assembly of Polyelectrolyte and Polyelectrolyte/Nanoparticle Films:Structural Characterization and Improvement of Mechanical Properties, Apr. 23, 2010
  60. Electrochemically assisted delamination - An experimental investigation, Apr. 23, 2010
  61. Future Pharmaceutical Package – A User’s Perspective, Apr. 30, 2010
  62. Flexible Relative Humidity (RH) Sensor based on Carbon Nanotubes thin film, Apr. 30, 2010
  63. A 3.1-4.8-GHz Energy-Detector Front-end for Non-coherent OOK Impulse-Radio UWB, May 7, 2010
  64. The New Generation Multi-touch Infrared Interface, May 7, 2010
  65. A Flexible Energy Detection IR-UWB Receiver for RFID and WSN, May 21, 2010
  66. Architectures for multimedia applications, May 28, 2010
  67. A Low Delay Multiple Reader Passive RFID System using Orthogonal TH-PPM IR-UWB, May 28, 2010
  68. Wireless Positioning using Ultra Wideband Technology, Jun. 18, 2010
  69. High speed inkjet printing, Aug. 26, 2010
  70. Solution processable nanomaterials for flexible deives, Aug. 26, 2010
  71. Micropower wireless links, Aug. 26, 2010
  72. Internet Connected  Wireless Sensor Network Platform for Multiple Applications, Aug. 26, 2010
  73. Micro-Power wireless link and electronics, Aug. 26, 2010
  74. Investigation of capacitive sensor interface for wireless sensor platform, Sep. 03, 2010
  75. A Reconfigurable Chipless RFID Tag with High SNR for Low Cost Applications in VHF Band, Sep. 10, 2010
  76. DC-to-DC voltage conversion with charge pump, Sep. 17, 2010
  77. High value-added uses of flexible electronics and low energy RFID/sensor systems in the US army, Sep. 24, 2010
  78. On deployment of wireless sensor network: coverage, lifetime, and cost analysis, Oct. 01, 2010
  79. An UHF/UWB-IR Asymmetric Link RFID transceiver for passive wireless sensor network applications, Oct. 01, 2010
  80. System-level exploration of mesh-based NoC architectures for multimedia applications, Oct. 08, 2010
  81. RF sigma delta modulation polar PA and EDA optimization application, Oct. 15, 2010
  82. Inkjet printable nanotube/polymer composite for high performance TFTs, Oct. 22, 2010
  83. A Digital Polar Transmitter Based on All Digital PLL and H-Bridge Class D Power Amplifier, Oct. 29, 2010
  84. Design of a Self-organized Intelligent Electrode for Synchronous Measurement of Multiple Bio-signals in a Wearable Healthcare Monitoring System, Nov. 05, 2010
  85. Wireless display and information tag for ambient intelligence, Nov. 19, 2010
  86. Wearable Electronics, Si-on-cloth: Research works in SSL, Kaist Korea, Nov. 26, 2010
  87. Hierarchical Multiple RFID system for internet of things, Nov. 26, 2010
  88. A CNT-based RFID sensor for humidity monitoring, Dec. 03, 2010
  89. Versatile UHF Printable Tag Antenna, Dec. 10, 2010
  90. Low cost Weight Sensor for transport package, Dec. 10, 2010
  91. Modeling and Analysis of Rayleigh Fading Channels using Stochastic Network Calculus, Jan. 14, 2011
  92. Partnering Opportunities for Commercializing iPack-Developed Technologies, Jan. 21, 2011
  93. Advanced Measurement Tools for Picolitre Droplets of Functional Materials, Feb. 4, 2011
  94. PANI and PANI/MWNT composite for flexible electronics: characterization and possible applications, Feb. 11, 2011
  95. Linearly Tapered RFID Tag Antenna with 40% Metal Reduction, Feb. 18, 2011
  96. Baseband Design for Wireless Information Tag, Mar. 4, 2011
  97. Printed Electronic at Tampere University of Technology, Mar. 11, 2011
  98. A polar transmitter architecture with digital switching amplifier for UHF RFID applications, Mar. 18, 2011
  99. Phase Noise in Oscillators and a Fast Measurement Method, Mar. 25, 2011
  100. A SoC Chip Design for a Self-organized Intelligent Electrode Used in Bio-medical Applications, Apr. 1, 2011
  101. Comparison of Circuit Switching and Wormhole Switching for the Implementation of MVC Decoding on Homogeneous NoCs, Apr. 8, 2011
  102. A Flexible Back-end with Optimum Threshold Estimation for OOK Based Energy Detection IR-UWB Receivers, Apr. 15, 2011
  103. Passive UHF RFID Locating, Apr. 29, 2011
  104. Non-linear Quantization Effects and Impacts on Phase Noise of Integer-N ALL Digital Phase Locked-Loop, May 6, 2011
  105. Mobility extraction for nantoube TFTs, May 13, 2011
  106. Measurement of UHF RFID tag antennas using half mirror method, May 20, 2011
  107. Design of a printable multi-funtional sensor for remote monitoring, May 27, 2011
  108. Insight into Quantitative Environmental Emission Analysis of Printed Circuit Board, Jun. 10, 2011
  109. iPack workshop Bio-Sensing Microchip and Heterogeneous Integration for Personal Healthcare Devices
  110. iPack workshop All-digital Polar TX Based on ADPLL and Phase Synchronized ΔΣ Modulator
  111. iPack workshop Challenges in Digital Fabrication - Fluids, Printheads and the Aftermath
  112. iPack workshop Printed Electronic Components Based on Graphene and Carbon Nano-Tubes (CNTs)
  113. The EIT ICT Doctoral School program in Innovation and Entrepreneurship, Nov. 11, 2012 
  114. Design and Demonstration of Passive UWB RFIDs: Chipless versus Chip Solutions, Nov. 16, 2012
  115. Practical Word Skills for Technical Paper Writing, Nov. 23, 2012
  116. Carbon nanotube/Polyaniline composite: An investigation of the effect of thermal ageing on the electrical conductivity stability of the composite thin films Dec. 7, 2012
  117. Future Impacts of RFID on Business Operations & Managing IT Infrastructure, Dec. 14, 2012
Electronic Design Automation
Non-Volatile Memory Technology, Design, Applications, and Future Trends
Low-Power Design and Power Management in Integrated Circuits
Power-Optimized Operational Transconductance Amplifier Design
Wireless System Design
Wireless Transceiver Building
WLAN Transceiver Design
Digital Signal Processors: Fundamentals, Design and Applications
Process Integration Strategies: 90 nm in 2004 to 30 nm in 2010
VLSI Digital Design
RF-CMOS and SiGe-BiCMOS Technologies for RF Analog and Mixed-Signal Integrated Circuits
Microelectronics to Nanoelectronics
Nanoelectronics: Electrons in Reduced Dimensions and Future Devices
3-Dimensional ICs: Motivation, Performance Analysis and Technology 
Materials, Processing and Characterization for Substrates and Packaging