• PhD, Robotics, London South Bank University, 201
• MSc. Mechatronics Engineering, London South Bank University, 2007
• BSc. Mechanical Engineering, University of Engineering and Technology Taxila, Pakistan, 2004

HEC approved Supervisor

Currently seven MSc. stduents and two PhD students are working under my supervision

Total Impact Facotr = 39.355

Google Citations =152

h-index=7

i10-index=4

• Firction stir welding
• Non Convnetional Joining method
• Process improvement
• Process improvement
• Squeeze casting
• Ergonomics
• Wall climbing robots
• Industrial Robots
• Robotics and Automation
• Non Destructive Testing
• Solar cell technology

Journal Publications

1. Ali, M. A., Jahanzaib, M., Wasim, A., Hussain, S., & Anjum, N. A. (2018). Evaluating the effects of as-casted and aged overcasting of Al-Al joints. The International Journal of Advanced Manufacturing Technology, 96(1-4), 1377-1392 (Impact factor 2.601).

2. Mirza Jahanzaib, Salman Hussain, Haris Aziz, Adnan Mirza, Saif Ullah (2017) "Modeling of weld bead geometry on HSLA steel using response surface methodology", The International Journal of Advanced Manufacturing Technology, Vol 89, no 5-8, pp 2087-2098 (Impact factor 601).
3. Usama Qazi, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain, (2017) 'An Institutional Framework for the Development of Sustainable and Competitive Power Market in Pakistan', Renewable & Sustainable Energy Reviews, Vol 70, pp 83-95 (Impact factor 9.184).
4. Shoaib Sarfraz, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain, Haris Aziz (2017) “Investigating the effects of as-casted and in-situ heat treated squeeze casting of Al-3.5%Cu alloy”, The International Journal of Advanced Manufacturing Technology, Vol 89, no 9, pp 3547-3561 (Impact factor 2.601).
5. Junaid Abbasi, Mirza Jahanzaib, Muhammad Azam, Salman Hussain, Ahmad Wasim, Musharraf, (2017) “ Effects Of Wire-Cut EDM Process Parameters on Surface Roughness of HSLA Steel”, The International Journal of Advanced Manufacturing Technology 91, no. 5-8 (2017): 1867-1878 (Impact factor 2.601).
6. Wasif Safeen, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, Haris Aziz, Hassan Abdalla (2016) "Predicting the tensile strength, impact toughness, and hardness of friction stir-welded AA6061-T6 using response surface methodology", The International Journal of Advanced Manufacturing Technology, pp 1-17 (Impact factor 2.601).
7. Muhammad Azam, Mirza Jahanzaib, Junaid Ali Abbasi, Ahmad Wasim, Salman Hussain (2016) "Parametric analysis of recast layer formation in wire-cut EDM of HSLA steel", The International Journal of Advanced Manufacturing Technology, 87(1-4), 713-722, (Impact factor 2.601).
8. Neelum Iqbal, Haris Aziz, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain (2016) "Integration of Cell Formation and Job Sequencing to Minimize Energy Consumption With Minimum Make-Span", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Available online at DOI: 10.1177/0954405416630182, pp 1-16 (Impact factor 1.445).
9. Muhammad Azam, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain, (2014) "Surface Roughness Modeling using RSM for HSLA Steel by Coated Carbide Tools", The International Journal of Advanced Manufacturing Technology, Vol 78, no. 5, pp 1031-1041, (Impact factor 2.601).
10. M. Huzaifa Raza, Ahmad Wasim, M. Asad Ali, Salman Hussain, Mirza Jahanzaib, “Investigating the effects of different electrodes on Al6061-SiC 7.5 wt% during electric discharge machining”, The International Journal of Advanced Manufacturing Technology, DOI:  https://doi.org/10.1007/s00170-018-2694-2 (Impact factor 2.601).
11. Aqib Mashood Khan, Muhammad Jamil, Ahsan Ul Haq, Salman Hussain, Longhui Meng, Ning He, “Sustainable machining. Modelling and optimization of temperature and surface roughness in the milling of AISI D2 steel”, Industrial Lubrication and Tribology, DOI https://doi.org/10.1108/ILT-11-2017-0322, (Impact factor 0.763).
12. Sajid, M., Wasim, A., Hussain, S., & Jahanzaib, M. (2018). Manufacturing feature-based cost estimation of cast parts. China Foundry, 15(6), 464-469. (Impact factor 0.360).
13. Wasim Ahmad, M. Rashid, M. Sajid, Salman Hussain, Mirza Jahanzaib, Atif Muhammad Khan, “Stress assessment based on Ergonomics coupled with image processing tools and techniques for lean product design and development”, Journal of the Chinese Institute of Engineers, (In Production), (Impact factor 0.471).
14. Hanif, M., Ahmad, W., Hussain, S., Jahanzaib, M., & Shah, A. H. (2018). Investigating the effects of electric discharge machining parameters on material removal rate and surface roughness on AISI D2 steel using RSM-GRA integrated approach. The International Journal of Advanced Manufacturing Technology,  DOI https://doi.org/10.1007/s00170-018-3019-1, (Impact factor 2.601).
15. Sarfraz, M. H., M. Jahanzaib, W. Ahmed and S. Hussain (2019). "Multi-response parametric optimization of squeeze casting process for fabricating Al 6061-SiC composite." The International Journal of Advanced Manufacturing Technology, DOI https://doi.org/10.1007/s00170-018-03278-6, (Impact factor 2.601).
16. Raza, M. H., Wasim, A., Hussain, S., Sajid, M., & Jahanzaib, M. (2019). Grain Selection and Crystal Orientation in Single‐Crystal Casting: State of the Art. Crystal Research and Technology, DOI https://doi.org/10.1002/crat.201800177, (Impact factor 1.122).
17. Manzoor, M. A. B., Hussain, S., Ahmad, W., & Jahanzaib, M. (2018). An Empirical Analysis of a Process Industry to Explore the Accident Causation Factors: A Case Study of a Textile Mill in Pakistan. Journal of Basic and Applied Sciences, 14, 72-79 (HEC recognized journal).
18. Bin Arshad, A. R., Hussain, S., & Qazi, W. (2018). Comparing capabilities of gecko and suction based wall climbing robots for adhesion, and transition. NFC IEFR Journal of Engineering and Scientific Research, 6, 148-154 (HEC recognized journal).
19. Ul Haq, M. Khan, A. M., Gong, L., Xu, T., Meng, L., & Hussain, S. (2018). A Comparative Study of Face Milling of D2 Steel Using Al2O3 Based Nanofluid Minimum Quantity Lubrication (NFMQL) and Minimum Quantity Lubrication (MQL). Advances in Science and Technology. Research Journal, 12(1).
20. Haq, M. A. U., Hussain, S., Ahmad, W., Jahanzaib, M., Iqbal, W., & Shehzadi, S. (2018). Optimization of Surface Roughness and MRR in Powder Mix EDM Die-Sink for Inconel 718 using RSM. Journal of Basic and Applied Sciences, 14, 98-106.
21. Sikande, T., Aziz, H., Wasim, A., Hussain, S., & Jahanzaib, M. (2017). Continuous quality improvement (CQI) framework: A case of industrial engineering department. International Journal of Cognitive Research in Science, Engineering and Education (IJCRSEE), 5(1), 107-119.
22. Ahitsham Shad Khan, Mirza Jahanzaib, Ahmad Wasim and Salman Hussain. (2017), “An ant colonial optimisation approach for no-wait permutation flow shop scheduling”, Int. J. Quality and Innovation.
23. Abaid Ullah, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, (2016) “Usage and Impacts of speed Humps on Vehicles: A Review”, Journal of Advanced Reviews on Scientific Research, Vol 28, issue 1, 1-17.
24. Zubair Iqbal, Hafiz Muhammad Khurram Ali, Ahmad Wasim, Salman Hussain, Mirza Jahanzaib (2016) “Evaluating Suppliers’ Efficiency using Conjoint Analysis”, The Nucleus, Vol 53, no. 2, pp 121-127 (HEC recognized journal).
25. Asghar, B., A. Wasim, M. Jahanzaib, and S. Hussain. (2016): "Impact of Privatization on Employee Relations at Pakistan Telecommunication Company Limited." Nucleus 53, no. 4 243-253 (HEC recognized journal).
26.  Zain ul Abidin, Hafiz Muhammad Khurram Ali, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib (2016) “Supplier Selection in an Industry of Short Lifecycle Products Using Bayesian Network Analysis”, Pakistan Journal of Science, Vol 68, no. 2, pp 157-163 (HEC recognized journal).
27. Hafiz Muhammad Khurram Ali, Muhammad Umer Farooq, Ahmad Wasim, Mirza Jahanzaib, Salman Hussain (2016) “Leverage of Office Automation in a Public Sector Engineering Organization: Pre and Post Implementation Analysis”, Pakistan Journal of Science, Vol 68, no. 2, pp 170-175 (HEC recognized journal).
28. Mirza Jahanzaib, Madiha Idrees, Ahmad Wasim, Salman Hussain, Haris Aziz (2016) “A framework for implementing Quality Function Deployment (QFD) for Utility Services”, IOSR Journal of Business and Management (IOSR-JBM), Vol 18, no. 4, Ver II, pp 92-99.
29. Javed Iqbal Khan, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain (2016) “Role of Organisational Behaviour (OB) to Enhance Productivity in a Public Sector Enterprise”, Journal of Advanced Research in Business and Management Studies, Vol. 2, no. 1, pp 11-25.
30. Aruba Waqar, Ahmad Wasim, Salman Hussain, Mirza Jahanzaib,  Haris Aziz (2016) “Environmental Management System Framework for Sustainability Achievement in Higher Educational Institutions”, Journal of Advanced Research in Business and Management Studies, Vol. 3, no. 1, pp 47-70.
31. Muhammad Irshad Yehya, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, Hassan Abdalla (2015) “A Cost Effective and Light Weight Unipolar Electroadhesion Pad Technology for Adhesion Mechanism of Wall Climbing Robot”, International Journal of Robotics and Mechatronics, Vol 2, no. 1, pp 1-10.
32. Zeeshan Farrukh , Salman Hussain , Mirza Jahanzaib, Ahmad Wasim, Haris Aziz (2015) “A Simple Multi-Criteria Inventory Classification Approach”, Technical Journal University of Engineering and Technology (UET) Taxila, Pakistan, Vol 20, No IV, pp 70-78 (HEC recognized journal).
33. Tahir Iqbal, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain (2015) “An Integrated Approach of Value Stream Mapping and Simulation for Process Improvements”, Technical Journal University of Engineering and Technology Taxila, Vol. 20, no. 2(S), pp 36-44(HEC recognized journal).  .
34. Rizwan Anwar, Mirza Jahanzaib, Ghulam Asghar, Ahmad Wasim, Salman Hussain (2015) “Optimization of Surface Roughness for Al-Alloy 7075-T in Milling Process, Technical Journal University of Engineering and Technology Taxila, Vol. 20, no. 2(S), pp 153-159 (HEC recognized journal).  
35. Muhammad Ashraf, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain (2014) “Production Planning and Control of Assembly Process for the High Tech Products”, Technical Journal University of Engineering and Technology Taxila, Vol 19, no. 1, pp 51-61 (HEC recognized journal).
36. Hussain, S., Sattar, T., & Salinas, E. (2012). “Parameter analysis and design framework for magnetic adhesion wall climbing wheeled robot”. International Journal of Intelligent Systems Technologies and Applications, 11(1): p. 102-116, Inderscience.

External Research Grants:

1. Design Manufacturing and Performance Evaluation of Solar Cooker using parabolic Through Collector (PTC) in Asian Environment, Grant No 3556, 1.6 Million, HEC-2015, Pakistan

2. An Investigation of Safety Climate in Science Labs in Pakistani Universities, Grant No 3483, 1 Million, HEC-2015, Pakistan 

Internal Research Grants (Dir ASR&TD)

1. Identification of process parameters’ influence on friction stir welding (Rs. 0.374 Million, 2013-14)

2. Optimization of cutting tool wear and suface roughness for turning CLARM HBR (30NiCrMoV14) based on RSM (Rs.0.150 Million, 2013-14).

3. Design, Analysis and Fabrication of Rolling-ball tool for Incremental Sheet Metal Forming (Rs. 0.50 Million, 2014-15)

4. Empirical investigation of Orthopaedic drilling (Rs. 0.22 Million, 2015-16)

5. Analysis of surface Roughness for minimum quantity lubricant (MQL) in grinding Process (Rs. 0.38 Million, 2015-16)

6. Mechanical and Micro-structural evaluation of Squeeze Cast Aluminum Copper Alloy using Response Surface Methodology (Rs. 0.49 Million, 2015-16)

7. Performance evaluation of solar thermal low pressure turbine in Asian Environment (Rs. 0.5 Million, 2015-16)

8. Investigating the effects of process parameters on near net shape casting of Aluminum alloy (Rs. 1.00 Million, 2016-17)

9. Identifying the effects of process parameters on refined crystal growth in investment casting using response surface methodology (Rs. 0.65 Million, 2016-17)

10. Investigation of the effects of process parameters on mechanical properties of overcast Al-Alloy joint (Rs. 0.2 Million, 2016-17)

11. Development of framework of E-health care system for effective patient monitoring (Rs. 0.625 Million, 2016-17)

1. Director Postgraduate Studies of Industrial Engineering department from April 2017 to date.
2. Editor, Technical Journal, UET Taxila from July 2017 to date.
3. Director Undergraduate Studies of Industrial Engineering department from august 2012 to April 2017.
4. Technical Expert, SAUG Project, for Industrial Engineering Department, University of Engineering and Technology
5. Acting Chairman Industrial Engineering Department time to time.
6. Member Departmental Semester Committee for Industrial Engineering Department
7. Class advisor for 1st year.
8. Focal person prime minster laptop scheme 2016-2017.
9. In-charge for shifting of Industrial Engineering department from shared building (with mechanical) to new dedicated building.
10. Member board of studies, Mechanical Engineering department, university of Engineering and Technology Peshawar.
11. Member board of faculty, Mechanical Engineering department, university of Engineering and Technology Taxila.

• Assistant Professor, Department of Industrial Engineering, August 2012 – till now.
• Teaching/ Research Associate, Department of Mechanical Engineering, August 2006-August 2012.

Memebr PEC

Memebr IISE

Associate memebr, Mechatronics, Robotics and Non testing research group, London South Bank University, London, United Kingdom

1. Production planning and Control
2. Design of Experiment
3. Automation and Control
4. Automation and Robotics
5. Applied MAchien Design and FEM
6. Probability and Statistics
7. Robotics
8. REsearch methodology and Design of Experiment
9. CAD/CAM
10. Computer Aided Process planning

Assistant Professor Industrial Engineering

Associate Member
Mechatronics, Robotics and Non-Destructive testing Research Center, Londson South Bank University, U.K.
www.lsbu.ac.uk/esbe/mrndt

University of Engineering and Technology Taxila

1. Mechanical Engineering

2. Industrial Engineering

   ---

    

Conference Proceedings

1. Niamat, M., Sarfraz, S., Aziz, H., Jahanzaib, M., Shehab, E., Ahmad, W., & Hussain, S. (2017). Effect of Different Dielectrics on Material Removal Rate, Electrode Wear Rate and Microstructures in EDM. Procedia CIRP, 60, 2-7
2. Qamara, Summyia, M. H. Azizb, Aisha Tayyab, Ahmad Wasim, Salman Hussain, and Chanchal Saha. (2016)"Application of Concurrent Engineering for Collaborative Learning and New Product Design” In Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, March 8-10, 2016.
3. Leon Rodriguez, H.E., Hussain, S., Sattar, T.,  (2012). A Compact Wall-Climbing and Surface Adaptation Robot for Non-Destructive Testing, in proceedings of the 12th International Conference on Control, Automation and Systems, 17-21 October, Jeju, Korea.
4. Sattar, T., Leon Rodriguez, H.E., Hussain, S., (2011). Keynote paper: Robotic Non Destructive Testing, In proceedings of 26th International Conference on CAD/CAM, Robotics and Factories of the Future 26th-28th July 2011, Kuala Lumpur, Malaysia, pages 23-41.
5. Hussain, S., T. Sattar, and E. Salinas., (2011). Towards Optimum Design Of Magnetic Adhesion Wall Climbing Wheeled Robots , In proceedings of 26th International Conference on CAD/CAM, Robotics and Factories of the Future, 26th-28th July 2011, Kuala Lumpur, Malaysia, pages 716-728.
6. Sattar, T., Lobarch, M., Hussain S and Leon Rodriguez, H.E., (2011). "Pole Placement Control of a Wall Climbing Vortex Machine," in proceedings of 13th International Conference On Climbing and Walking Robots and the Support Technologies for Mobile Machines, 31 August-3 September 2010, Nagoya, Japan.

S., Sattar, T., A Compact Wall-Climbing and Surface Adaptation Robot for Non-Destructive Testing, in proceedings of the 12th International Conference on Control, Automation and Systems, 17-21 October 2012, Jeju, Korea.

PhD being supervised

1. Towards efficient Integration of Health, Environment, Safety and Ergonomics management system, Abaid Ullah, 16-UET/PhD-EM-10.
2. Development of an innovative cost modelling system for metal casting process under lean Environment, Muhammad Sajid, 16-UET/PhD-EM-F-09.
3. Rapid Prototyping for multi material parts and assemblies, Haji Bahadur Khan, 14-UET-PhD-IE-06.

MSc students supervised (during last three years)

1. Prediction of surface roughness with nano-particles based milling, Muhammad Ahsan Ul Haq, 15-IED-MSc-IE/FT-04.
2. Comparing capabilities of Gecko and suction based wall climbing robot for adhesion, transition and obstacle avoidance, Abdul Rafay Bin Arshad, 15-IED-MSc-IE/FT-08.
3. Towards efficient application of speed humps as traffic calming device, Abaid Ullah 14-IED-MSc-EM/FT-05.
4. Empirical investigation of orthopedic drilling, Muhammad Jamil, 14-IED-MSc-IE/FT-01.
5. Power and Energy optimization in rechargeable secondary batteries, Atif Jawad Khan, 14-IED-MSc-EM/FT-01.
6. To study the impact of organizational culture on the productivity of manufacturing industries, Zainab Shahid, 14-IED-MSc-IE/FT-04.
7. Improvements in friction stir welding strength, Zaheer Ahmad (12IE&MS-MS/PT-IE-02).
8. Experimental Investigations pm surface texture by using different cooling modes for hard to machine materials, Muhammad Aftab Sadiq, 13-IED-MSc-IE/Pt-02.
9. Modelling and optimization of friction stir welding using nano-composites, Muhammad Salman Mughal, 13-IED-MSc-IE/PT-04.
10. An investigation of Job satisfaction among engineers working in a broadcasting organization, Maria Zain, 12-IE&MS-MS/PT-EM-12.
11. Multicriteria optimization of process planning in reconfigurable manufacturing setups, Usman Ghafoor, 12-IE&MS-MS/PT-IE-10,
12. An MCDM evaluation of Managers training effectiveness, Safdar Ali, 11-MS-EM-EM-02.
13. Muhammad Zubair Iqbal, 13-IED-MSc-EM/FT-03
14. Evaluation and selection of supplier reliability in short product life industry, Zain Ul Abidin, 13-IED-MSc-EM/FT-04.
15. Influence of process parameters on friction stir welding, Mian Wasif Safeen, 13-IED-MSc-IE/FT-03.
16. Accidental Analysis in process plants for safer working environment, Muhammad Ali Bin Manzoor, 15-MS-EM-FT-06.
17. A framework for E-health care: From Continuous improvement perspective, Ayesha Kamal, 16-IED-MSc-EM/FT-04.
18. Achieving Better dimensional tolerances and surface finish in sand casting process, Faisal Hafeez, 16-IED-MSc-IE/FT-06.

• Organized and conducted one day CPD activity on “Mastering EndNote for Referencing” on 30th April 2014 at Ergonomics laboratory, Industrial Engineering department, UET Taxila.
• Organized and conducted training on “Advanced Manufacturing Systems” for faculty and lab Engineers from 7th November to 11th November 2016.
• Organized and conducted workshop on “Safety environment in Engineering labs” at IED, UET Taxila, May 2017.
• Organized and delivered workshop on “An Investigation of safety climate at scientific laboratories” at Industrial Engineering Department, University of Engineering and Technology Peshawar on 26th April 2018.
• Organized and delivered workshop on “An Investigation of safety climate at scientific laboratories” at National Institute of Mechatronics Engineering (NIME), University of Engineering & Technology (UET), Peshawar on 17th July 2018.
• Organized CPD seminar on “Industry 4.0” on 16th January 2018 at Industrial Engineering Department, UET Taxila.
• Organized and delivered workshop on “An Investigation of safety climate at scientific laboratories at "Mehran University of Engineering and Technology, Jamshoro on 5th March 2019.
• Organized and delivered workshop on “An Investigation of safety climate at scientific laboratories" at NED Karachi on 6th March 2019.