• B.Sc. (Mechanical Engineering), University of Engineering and Technology Taxila (UET Taxila), Taxila, District Rawalpindi, Punjab, Pakistan.
• M.Sc. (Mechanical Engineering), University of Engineering and Technology Taxila (UET Taxila), Taxila, District Rawalpindi, Punjab, Pakistan.
• Ph.D. (Mechanical Engineering), Otto-von-Guericke-University Magdeburg (OvGU Magdeburg), Germany.

1. Rana Atta ur Rahman, "Demarcation of fatigue crack initiation phase of Aluminum with thermal loading", 2011, (MSc. Thesis)
2. Mudaserullah, R. A. Pasha, R. A. Rahman and W. Asghar "Fatigue Life Estimation of DifferentWelding Zones of Oxy Acetylene Welded Aluminum Alloy (AA 5052-H32)", The Nucleus 50 "A Quarterly Scientific Journal of Pakistan Atomic Energy Commission" NCLEAM, ISSN 0029-5698,No. 3 (2013) Page 261-265
3. Rana Atta-ur-Rahman et al "Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading" Life Sci J 2013; IF 0.165, 10 (12s): 678-683 (ISSN: 1097-8135)
4. M. A. Nasir, Z. Khan, Mudaser Ullah, R. A. Pasha, and R. A. Rahman, Q. Ali, S. Anas, S. Nauman, and S. Amin "Density Variation Effects on Cross Dimension (CD) Strength of Phenolic Multi-layered Composites Fabricated via VARTM" The Nucleus 51 "A Quarterly Scientific Journal of Pakistan Atomic Energy Commission" NCLEAM, ISSN 0029-5698, No. 1 (2014) Page 13-18
5. M. A. Nasir, Z. Khan, I. Farooqi, S. Nauman, S. Anas, S. Khalil, A. Pasha, M. Shah, H. Qaiser, and R. Ata "Transverse Shear Behavior of a Nomex Core for Sandwich Panels" Journal of Mechanics of Composite Materials, IF 0.451, Vol. 50, No. 6 (2015) Page 733-738
6. Daniel Juhre, Rana Atta ur Rahman "Finite element simulation of medical devices made of shape memory materials" International Conference on Biomedical Technology 2015, Hannover, Germany, (2015) Presented
7. Rana Atta ur Rahman "Introduction to programming to finite element simulations" Seminar at Institute of Rubber Technology, Hannover, Germany organized by Daniel Juhre, (2015) Attended
8. Mehmood S, Sultan A, Anwar W, Butt Z, Javed K, Rehman RA. “A Symbiosis Modeling Approach of Global Supply Chain of an SME using Mixed Integer Programming (MIP) and System Dynamics (SD)” Journal of Quality and Technology Management, Vol. 14, No. 2 (2017) Page 1-19
9. Rana Atta ur Rahman "Experimental Characterization of Fatigue Crack Initiation of Mineralized AA320 Alloy Under CTC and ML during four point rotating and bending fatigue testing machine" Meeting of European SIAM Chapters 2017, Prague, Czech Republic, (2017) Published in Book of Abstracts
10. Rana Atta ur Rahman "Finite element simulation of the deformation behavior of shape memory alloy structures" PhD SummerNet 2017, Max Planck Institute, Magdeburg, Germany, (2017) Shotgun Presentation
11. Rana Atta ur Rahman, Daniel Juhre and Usama Khan, "Experimental Characterization for Initiation of Crack during Fatigue Analysis of Mineralized Aluminium Alloy under both Thermal and Mechanical Loading on Rotating & Bending Machine", Current Smart Materials, Vol. 3, No. 1 (2018) Page 68-72
12. R. A. Rahman, Daniel Juhre, and Thorsten Halle "Experimental characterization of phase transformation of Fe–15Mn–10Cr–8Ni–4Si (wt. %) iron based shape memory functional materials using
    dilatometry" International Conference on Mining, Material, and Metallurgical Engineering (ICMMME) Madrid, Spain, (2018) Page 55-57 Published in Book of Abstracts
13. Rana Atta Ur Rahman, Daniel Juhre, and Thorsten Halle, "Review of types, properties and importance of ferrous based shape memory alloys", Korean Journal of Materials Research, IF 0.1, Vol. 28, No. 7 (2018) Page 381-388
14. S. Mehmood, N.A. Anjum, W. Anwar, R.A. Rahman, K. Javed, and S. Badshah, “A Review of the Effect of Electric Discharge Machining on the Surface Integrity of Metallic Parts” The Nucleus, Vol. 55, No. 1 (2018) Page 38-46
15. R. A. Rahman, Daniel Juhre, and Thorsten Halle, "Experimental characterization of phase transformation of Fe-15Mn-10Cr-8Ni-4Si (wt. %) iron-based shape memory functional materialsusing dilatometry", International Journal of Advances in Mechanical and Civil Engineering (IJAMCE), IF 3.66, Vol. 5, No. 6 (Nov-2018), Page 10-13
16. Rana Atta ur Rahman, Daniel Juhre, and Thorsten Halle, "Comparison of biaxial loading of ferrous based (Fe-based) shape memory smart materials with linear and non-linear materials", Current Smart Materials, Vol. 3, No. 2 (2018) Page 90-98
17. RAHMAN Rana Atta ur, JUHRE Daniel, HALLE Thorsten, MEHMOOD Shahid, and ASGHAR Waqas, "Types, DSC Thermal Characterization of Fe-Mn-Si based Shape Memory Smart Materials and their Feasibility for Human Body in Terms of Austenitic Start Temperatures" Journal of engineering technology, IF 0.69, Vol. 8, No. 1 (Jan-2019) Page 185-206
18. R. A. Rahman, Daniel Juhre, and Thorsten Halle, "Review of applications of ferrous based shape memory smart materials in engineering and in biomedical sciences", Pakistan Journal of Engineering and Applied Sciences, Vol. 24 (Jan-2019) Page 32-49
19. Rahman RA "Fatigue Crack Initiation in AA3004 At ElevatedTemperature Using Rotating and Bending Fatigue TestingMachine", Modern Approaches on Material Science, Vol. 1, No.
    2 (2019) Page 39-42 
20. Shoaib Ahmed, Rana Atta ur Rahman et al, "OPTIMIZATION OF FRICTION STIR WELDING PARAMETERS FOR AA5451 TO IMPROVE HARDNESS AND PERCENTAGE ELONGATION" , 4th INTERNATIONAL AFRICAN CONFERENCE ON CURRENT STUDIES, Bani Waleed University, Libya (2021) Page 151-157 
21. Taj Munir, Rana Atta ur Rahman, Ali Raza, Muhammad Yousaf Malik, Ilyas Khan, Ahmed Ashour, Abd Allah A. Mousa, and Ali Saeed Alqahtani, "Multiple-scale analysis of the parametric-driven
    sine-Gordon equation with phase shifts" Open Physics, Vol. 20, (2022) Page 526-537
22. Shoaib Ahmed, Rana Atta ur Rahman, Awais Awan, Sajjad Ahmad, Waseem Akram, Muhammad Amjad , Mohd Yazid Yahya and Seyed Saeid Rahimian Koloor,  "Optimization of Process Parameters in Friction Stir Welding of Aluminum 5451 in Marine Applications" Journal of Marine Science and Engineering, Vol. 10, (2022) Page 1-13, 1539
23. Rana Atta ur Rahman, "Identification of thermal and mechanical parameters for Fe-15Mn-10Cr-8Ni-4Si (wt. %) ferrous based shape memory alloy", 2022, (PhD Thesis)
24. Abdullah, Shahid Mehmood, and Rana Atta ur Rahman, "Investigating parametric effects during TIG welding of dissimilar metals", Mehran University Research Journal of Engineering and Technology, IF 0.6, Vol. 43, No. 1 (2024) Page 165-181
25. Muhammad Muneeb Rasheed, Ahmed Saif, Rana Atta ur Rahman, Muhammad Ali Nasir, Shahid Mehmood, Muhammad Usman, Abdul Moiz Rao, "Martensitic transformation temperature modification of Fe-SMA for efficient medical implants", Mehran University Research Journal of Engineering and Technology, IF 0.6, Vol. 43, No. 3 (2024) Page 78-88
26. Muhammad Muneeb Rasheed, Rana Atta ur Rahman, Shahid Mehmood, Ahmed Saif, Muhammad Usman and Abdul Moiz Rao, "Condensed Review on the Chemical Compositions and Transformation Temperatures Characterization in Cu-Al Shape Memory Alloys", Journal of Engineering Technology, IF 0.33, Vol. 41, No. 1 (2024) Page 30-35
27. Jamil Abbas Haider, Shahbaz Ahmad, Khaled A. Gepreel, and R. A. Rahman, "Multifaceted simulation: Finite volume and finite element modeling of blood flow in multiple stenosed arteries", Modern Physics Letters B, IF 1.8 (2024)
28. Muhammad Muneeb Rasheed, Rana Atta ur Rahman,Syed Zameer Abbas, "Investigation of Copper Addition on Corrosion Behavior of a Ferrous Based Shape Memory Alloy for Biomedical Implant Applications", Key Engineering Materials, IF 0.44, Vol. 991 (2024) Page 53-59

• Shape Memory Alloys.
• Applied Mechanics and Design.
• Fracture and Fatigue of Metals & Alloys.
• Mechanical and thermal characterization of materials.
• Numerical Computational (with German collaboration).
• Mechanical Vibrations.
• Ferrous based Shape Memory Alloys.
• Composite Materials.

1. Rana Atta ur Rahman, "Demarcation of fatigue crack initiation phase of Aluminum with thermal loading", 2011, (MSc. Thesis)
2. Mudaserullah, R. A. Pasha, R. A. Rahman and W. Asghar "Fatigue Life Estimation of DifferentWelding Zones of Oxy Acetylene Welded Aluminum Alloy (AA 5052-H32)", The Nucleus 50 "A Quarterly Scientific Journal of Pakistan Atomic Energy Commission" NCLEAM, ISSN 0029-5698,No. 3 (2013) Page 261-265
3. Rana Atta-ur-Rahman et al "Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading" Life Sci J 2013; IF 0.165, 10 (12s): 678-683 (ISSN: 1097-8135)
4. M. A. Nasir, Z. Khan, Mudaser Ullah, R. A. Pasha, and R. A. Rahman, Q. Ali, S. Anas, S. Nauman, and S. Amin "Density Variation Effects on Cross Dimension (CD) Strength of Phenolic Multi-layered Composites Fabricated via VARTM" The Nucleus 51 "A Quarterly Scientific Journal of Pakistan Atomic Energy Commission" NCLEAM, ISSN 0029-5698, No. 1 (2014) Page 13-18
5. M. A. Nasir, Z. Khan, I. Farooqi, S. Nauman, S. Anas, S. Khalil, A. Pasha, M. Shah, H. Qaiser, and R. Ata "Transverse Shear Behavior of a Nomex Core for Sandwich Panels" Journal of Mechanics of Composite Materials, IF 0.451, Vol. 50, No. 6 (2015) Page 733-738
6. Daniel Juhre, Rana Atta ur Rahman "Finite element simulation of medical devices made of shape memory materials" International Conference on Biomedical Technology 2015, Hannover, Germany, (2015) Presented
7. Rana Atta ur Rahman "Introduction to programming to finite element simulations" Seminar at Institute of Rubber Technology, Hannover, Germany organized by Daniel Juhre, (2015) Attended
8. Mehmood S, Sultan A, Anwar W, Butt Z, Javed K, Rehman RA. “A Symbiosis Modeling Approach of Global Supply Chain of an SME using Mixed Integer Programming (MIP) and System Dynamics (SD)” Journal of Quality and Technology Management, Vol. 14, No. 2 (2017) Page 1-19
9. Rana Atta ur Rahman "Experimental Characterization of Fatigue Crack Initiation of Mineralized AA320 Alloy Under CTC and ML during four point rotating and bending fatigue testing machine" Meeting of European SIAM Chapters 2017, Prague, Czech Republic, (2017) Published in Book of Abstracts
10. Rana Atta ur Rahman "Finite element simulation of the deformation behavior of shape memory alloy structures" PhD SummerNet 2017, Max Planck Institute, Magdeburg, Germany, (2017) Shotgun Presentation
11. Rana Atta ur Rahman, Daniel Juhre and Usama Khan, "Experimental Characterization for Initiation of Crack during Fatigue Analysis of Mineralized Aluminium Alloy under both Thermal and Mechanical Loading on Rotating & Bending Machine", Current Smart Materials, Vol. 3, No. 1 (2018) Page 68-72
12. R. A. Rahman, Daniel Juhre, and Thorsten Halle "Experimental characterization of phase transformation of Fe–15Mn–10Cr–8Ni–4Si (wt. %) iron based shape memory functional materials using
    dilatometry" International Conference on Mining, Material, and Metallurgical Engineering (ICMMME) Madrid, Spain, (2018) Page 55-57 Published in Book of Abstracts
13. Rana Atta Ur Rahman, Daniel Juhre, and Thorsten Halle, "Review of types, properties and importance of ferrous based shape memory alloys", Korean Journal of Materials Research, IF 0.1, Vol. 28, No. 7 (2018) Page 381-388
14. S. Mehmood, N.A. Anjum, W. Anwar, R.A. Rahman, K. Javed, and S. Badshah, “A Review of the Effect of Electric Discharge Machining on the Surface Integrity of Metallic Parts” The Nucleus, Vol. 55, No. 1 (2018) Page 38-46
15. R. A. Rahman, Daniel Juhre, and Thorsten Halle, "Experimental characterization of phase transformation of Fe-15Mn-10Cr-8Ni-4Si (wt. %) iron-based shape memory functional materialsusing dilatometry", International Journal of Advances in Mechanical and Civil Engineering (IJAMCE), IF 3.66, Vol. 5, No. 6 (Nov-2018), Page 10-13
16. Rana Atta ur Rahman, Daniel Juhre, and Thorsten Halle, "Comparison of biaxial loading of ferrous based (Fe-based) shape memory smart materials with linear and non-linear materials", Current Smart Materials, Vol. 3, No. 2 (2018) Page 90-98
17. RAHMAN Rana Atta ur, JUHRE Daniel, HALLE Thorsten, MEHMOOD Shahid, and ASGHAR Waqas, "Types, DSC Thermal Characterization of Fe-Mn-Si based Shape Memory Smart Materials and their Feasibility for Human Body in Terms of Austenitic Start Temperatures" Journal of engineering technology, IF 0.69, Vol. 8, No. 1 (Jan-2019) Page 185-206
18. R. A. Rahman, Daniel Juhre, and Thorsten Halle, "Review of applications of ferrous based shape memory smart materials in engineering and in biomedical sciences", Pakistan Journal of Engineering and Applied Sciences, Vol. 24 (Jan-2019) Page 32-49
19. Rahman RA "Fatigue Crack Initiation in AA3004 At ElevatedTemperature Using Rotating and Bending Fatigue TestingMachine", Modern Approaches on Material Science, Vol. 1, No.
    2 (2019) Page 39-42 
20. Shoaib Ahmed, Rana Atta ur Rahman et al, "OPTIMIZATION OF FRICTION STIR WELDING PARAMETERS FOR AA5451 TO IMPROVE HARDNESS AND PERCENTAGE ELONGATION" , 4th INTERNATIONAL AFRICAN CONFERENCE ON CURRENT STUDIES, Bani Waleed University, Libya (2021) Page 151-157 
21. Taj Munir, Rana Atta ur Rahman, Ali Raza, Muhammad Yousaf Malik, Ilyas Khan, Ahmed Ashour, Abd Allah A. Mousa, and Ali Saeed Alqahtani, "Multiple-scale analysis of the parametric-driven
    sine-Gordon equation with phase shifts" Open Physics, Vol. 20, (2022) Page 526-537
22. Shoaib Ahmed, Rana Atta ur Rahman, Awais Awan, Sajjad Ahmad, Waseem Akram, Muhammad Amjad , Mohd Yazid Yahya and Seyed Saeid Rahimian Koloor,  "Optimization of Process Parameters in Friction Stir Welding of Aluminum 5451 in Marine Applications" Journal of Marine Science and Engineering, Vol. 10, (2022) Page 1-13, 1539
23. Rana Atta ur Rahman, "Identification of thermal and mechanical parameters for Fe-15Mn-10Cr-8Ni-4Si (wt. %) ferrous based shape memory alloy", 2022, (PhD Thesis)
24. Abdullah, Shahid Mehmood, and Rana Atta ur Rahman, "Investigating parametric effects during TIG welding of dissimilar metals", Mehran University Research Journal of Engineering and Technology, IF 0.6, Vol. 43, No. 1 (2024) Page 165-181
25. Muhammad Muneeb Rasheed, Ahmed Saif, Rana Atta ur Rahman, Muhammad Ali Nasir, Shahid Mehmood, Muhammad Usman, Abdul Moiz Rao, "Martensitic transformation temperature modification of Fe-SMA for efficient medical implants", Mehran University Research Journal of Engineering and Technology, IF 0.6, Vol. 43, No. 3 (2024) Page 78-88
26. Muhammad Muneeb Rasheed, Rana Atta ur Rahman, Shahid Mehmood, Ahmed Saif, Muhammad Usman and Abdul Moiz Rao, "Condensed Review on the Chemical Compositions and Transformation Temperatures Characterization in Cu-Al Shape Memory Alloys", Journal of Engineering Technology, IF 0.33, Vol. 41, No. 1 (2024) Page 30-35
27. Jamil Abbas Haider, Shahbaz Ahmad, Khaled A. Gepreel, and R. A. Rahman, "Multifaceted simulation: Finite volume and finite element modeling of blood flow in multiple stenosed arteries", Modern Physics Letters B, IF 1.8 (2024)
28. Muhammad Muneeb Rasheed, Rana Atta ur Rahman,Syed Zameer Abbas, "Investigation of Copper Addition on Corrosion Behavior of a Ferrous Based Shape Memory Alloy for Biomedical Implant Applications", Key Engineering Materials, IF 0.44, Vol. 991 (2024) Page 53-59

1. To Find Fatigue life of Aluminium with thermal loading under Four point rotating and bending fatigue testing machine: 2009 BSc Mechanical Engineering
2. Fatigue Life Estimation of Welded Alumnum Alloy on Rotating & Bending Fatigue Testing Machine: BSc Mechanical Engineering
3. Analysis of Fatigue Life Estimation of Welded Alloy on Rotating & Bending Fatigue Testing Machine by using software: BSc Mechanical Engineering
4. Fabrication of Solar Stirling Engine: BSc Mechanical Engineering
5. Reduction of Austenite Start Temperature of Ferrous based Shape Memory Alloy (Fe-SMA) measured through Differential Scanning Calorimetry (DSC): BSc Mechanical Engineering 2k16
6. Process Optimization of Friction Stir Welding of Aluminum Alloy to find the Joint Efficiency. MSc Mechanical Engineering (Shoaib Ahmed)
7. Investigation of Alloying elements on corrosion behaviour of a Ferrous based Shape Memory Alloy. MSc Mechanical Engineering (M. Muneeb Rasheed)
8. Production and Characterization of FeMnAl based Shape Memory Alloy (FeMnAl-SMA) with proper ternary additions. BSc Mechanical Engineering 2k19
9. Investigation of chromium effect on Fe-mn-Si  Based shape memory alloy. BSc Mechanical Engineering 2k19
10. Manufacturing and characterization of Fe-mn-Si  Based shape memory alloy. BSc Mechanical Engineering 2k19
11. Effect of Chromium (Cr) on phase transformation behaviour of Fe-20Mn-6Si. MSc Mechanical Engineering (Junaid Khan)
12. Fabrication of Ball Milling Machine for Mixing Metal Powder. BSc Mechanical Engineering 2k20
13. Characterization of Fe-36Mn-8Al-6Ni.Ferrous based Shape Memory Alloy.  BSc Mechanical Engineering 2k20
14.  Investigation of super elasticity/Pseudo elasticity in Ferrous-based shape memory alloys.. PhD Mechanical Engineering (Muhammad Mubashir Iqbal)

1. Resident Tutor Quid-e-Azam Hall, UET Taxila ( June 2008 to April 2012).
2. Incharge Engineering Mechanics Lab (2008 to 2014).
3. Incharge Mechanics of Materials Lab (2019).
4. Incharge Mechanics of Machines Lab (2019 till now).
5. Incharge Mechanical Vibrations Lab (2019 till now).
6. Director Publications (2019 till date).
7. Departmental Quality Enhancement Cell, DQEC (Secretary).
8. Organiser of 1st International Conference on Advances in Mechanical, Materials, Mechatronics and Energy Engineering (ICAME-24) held on 17-18 October, 2024 at Mechanical Engineering Department, University of Engineering and Technology Taxila (UET Taxila), Taxila City, District Rawalpindi, Punjab, Pakistan.

Upgradation of Fracture Mechanics Lab.

Upgradation of Fluid Mechanics Lab.

Upgradation of Mechanics of Materials Lab.

Upgradation of Mechanics of Machines Lab.

1 Apr 2005–18 Sep 2006: Assistant Engineer, DEWAN SALMAN FIBRE (PVT) LTD, Hattar (Pakistan).
▪ Diagnosing of troubleshoot.
▪ Rectifying the faults specially of hydraulic system.
▪ Erection of Gas Generators along with pipe network.
▪ Decision making for smooth and continuous operation of plant.
▪ Managerial skills to lead the team.
▪ Excellent planning, Organizing and Coordination activities.
▪ Design of parts on Auto Cad. etc.

21 Sep 2006–23 Jun 2008: Assistant Manager, GHANI GLASS (Pvt.) LTD, Hattar (Pakistan).
▪ Maintenance and Operation Management of Compressor House.
▪ Maintenance and Operation Management of Power House.
▪ ISO 9001:2000 and ISO 14001 in this organization.

24 Jun 2008–Present: Assistant Professor, Mechanical Engineering Department, University of Engineering & Technology Taxila, Taxila (Pakistan).
▪ Teaching at Mechanical Engineering Department, University of Engineering & Technology Taxila, Taxila (Pakistan).
▪ Research at Mechanical Engineering Department, University of Engineering & Technology Taxila, Taxila (Pakistan).
▪ PhD Research at Otto Von Guericke University (OvGU), Magdeburg, Germany.

1 Apr 2005–18 Sep 2006: Assistant Engineer, DEWAN SALMAN FIBRE (PVT) LTD, Hattar (Pakistan).
▪ Diagnosing of troubleshoot.
▪ Rectifying the faults specially of hydraulic system.
▪ Erection of Gas Generators along with pipe network.
▪ Decision making for smooth and continuous operation of plant.
▪ Managerial skills to lead the team.
▪ Excellent planning, Organizing and Coordination activities.
▪ Design of parts on Auto Cad. etc.

21 Sep 2006–23 Jun 2008: Assistant Manager, GHANI GLASS (Pvt.) LTD, Hattar (Pakistan).
▪ Maintenance and Operation Management of Compressor House.
▪ Maintenance and Operation Management of Power House.
▪ ISO 9001:2000 and ISO 14001 in this organization.

24 Jun 2008–Present: Assistant Professor, Mechanical Engineering Department, University of Engineering & Technology Taxila, Taxila (Pakistan).
▪ Teaching at Mechanical Engineering Department, University of Engineering & Technology Taxila, Taxila (Pakistan).
▪ Research at Mechanical Engineering Department, University of Engineering & Technology Taxila, Taxila (Pakistan).
▪ PhD Research at Otto Von Guericke University (OvGU), Magdeburg, Germany.

1. International Association of Engineers (IAENG), Membership # 136143.
2. PakistanEngineering Council, Membership #MECH/18800.
3. Member of Society for Industrial and Applied Mathematics (SIAM), Membership # 020841246.
4. Member of Magdeburger Verein für Technische Mechanik e.V (MATEM).

Serving as an Assistant Professor in Mechanical Engineering Department, University of Engineering & Technology, Taxila, Punjab, Pakistan since 24th June, 2008.

I taught following subjects,

1. Mechanical Vibrations (2008 till date)
2. Engineering Statics (2008 to 2014)
3. Engineering Dynamics (2008 to 2014)
4. Mechanics of Machines (2k10 Session)
5. Stress Analysis Labs
6. Engineering Drawing and Graphics Labs
7. Mechanics of Materials-II (2019 till date)

Assistant Professor

1 Apr 2005–18 Sep 2006: Assistant Engineer, DEWAN SALMAN FIBRE (PVT) LTD, Hattar (Pakistan).
▪ Diagnosing of troubleshoot.
▪ Rectifying the faults specially of hydraulic system.
▪ Erection of Gas Generators along with pipe network.
▪ Decision making for smooth and continuous operation of plant.
▪ Managerial skills to lead the team.
▪ Excellent planning, Organizing and Coordination activities.
▪ Design of parts on Auto Cad. etc.

21 Sep 2006–23 Jun 2008: Assistant Manager, GHANI GLASS (Pvt.) LTD, Hattar (Pakistan).
▪ Maintenance and Operation Management of Compressor House.
▪ Maintenance and Operation Management of Power House.
▪ ISO 9001:2000 and ISO 14001 in this organization.

24 Jun 2008–Present: Assistant Professor, Mechanical Engineering Department, University of Engineering & Technology Taxila, Taxila (Pakistan).
▪ Teaching at Mechanical Engineering Department, University of Engineering & Technology Taxila, Taxila (Pakistan).
▪ Research at Mechanical Engineering Department, University of Engineering & Technology Taxila, Taxila (Pakistan).
▪ PhD Research at Otto Von Guericke University (OvGU), Magdeburg, Germany.

Memberships:

1. International Association of Engineers (IAENG), Membership # 136143.
2. PakistanEngineering Council, Membership #MECH/18800.
3. Member of Society for Industrial and Applied Mathematics (SIAM), Membership # 020841246.
4. Member of Magdeburger Verein für Technische Mechanik e.V (MATEM).

Faculty Development Programme (FDP) Scholarship by UET Taxila for Ph.D. at Germany.

1. 2nd International Conference on Biomedical Technology 2015 (ICBT 2015), Hannover, Germany.
2. Meeting of European SIAM Chapters 2017 (MESIAM 17), Prague, Czech Republic.
3. Oral Presentation at 2nd MPI Magdeburg PhD SummerNet (September-2017), Max Planck Institute, Magdeburg, Germany.
4. International Conference on Mining, Material, and Matallurgical Engineering (ICMMME) 2018, Madrid, Spain.
5. 4th INTERNATIONAL AFRICAN CONFERENCE ON CURRENT STUDIES, (2021), Bani Waleed University Libya.
6. 2 days International Conference on Digital Futures and Transformative Technologies, 2023, NUST, Islamabad, Pakistan.
7. Organiser of 1st International Conference on Advances in Mechanical, Materials, Mechatronics and Energy Engineering (ICAME-24) held on 17-18 October, 2024 at Mechanical Engineering Department, University of Engineering and Technology Taxila (UET Taxila), Taxila City, District Rawalpindi, Punjab, Pakistan.

1. One day Seminar on Vacuum Science & Technology held at NINVAST on October 14, 2008.
2. One day Seminar on Sales & Marketing held at HMC Taxila on March 20, 2012.
3. Two days CPD Course on Multidisciplinary Design & Optimization held at MAJU Islamabad on November 16-17, 2012 having one credit point.
4. One day CPD Short Course on Building Code of Pakistan (Seismic Provisions) held at PEC Branch Office Muzaffarabad on September 09, 2013 having one CPD Point.

1. To Find Fatigue life of Aluminium with thermal loading under Four point rotating and bending fatigue testing machine: 2009 BSc Mechanical Engineering
2. Fatigue Life Estimation of Welded Alumnum Alloy on Rotating & Bending Fatigue Testing Machine: BSc Mechanical Engineering
3. Analysis of Fatigue Life Estimation of Welded Alloy on Rotating & Bending Fatigue Testing Machine by using software: BSc Mechanical Engineering
4. Fabrication of Solar Stirling Engine: BSc Mechanical Engineering
5. Reduction of Austenite Start Temperature of Ferrous based Shape Memory Alloy (Fe-SMA) measured through Differential Scanning Calorimetry (DSC): BSc Mechanical Engineering 2k16
6. Process Optimization of Friction Stir Welding of Aluminum Alloy to find the Joint Efficiency. MSc Mechanical Engineering (Shoaib Ahmed)
7. Investigation of Alloying elements on corrosion behaviour of a Ferrous based Shape Memory Alloy. MSc Mechanical Engineering (M. Muneeb Rasheed)
8. Production and Characterization of FeMnAl based Shape Memory Alloy (FeMnAl-SMA) with proper ternary additions. BSc Mechanical Engineering 2k19
9. Investigation of chromium effect on Fe-mn-Si  Based shape memory alloy. BSc Mechanical Engineering 2k19
10. Manufacturing and characterization of Fe-mn-Si  Based shape memory alloy. BSc Mechanical Engineering 2k19
11. Effect of Chromium (Cr) on phase transformation behaviour of Fe-20Mn-6Si. MSc Mechanical Engineering (Junaid Khan)
12. Fabrication of Ball Milling Machine for Mixing Metal Powder. BSc Mechanical Engineering 2k20
13. Characterization of Fe-36Mn-8Al-6Ni.Ferrous based Shape Memory Alloy.  BSc Mechanical Engineering 2k20
14.  Investigation of super elasticity/Pseudo elasticity in Ferrous-based shape memory alloys.. PhD Mechanical Engineering (Muhammad Mubashir Iqbal)

1. One month attachment with Drilling Department of Oil & Gas Development Company Limitted (OGDCL) Pakistan at Drilling Rig-N4 Dakhni Field in 2004.
2. One day Workshop on "Implementation of Outcome Based Education (OBE)" held on 7th November-2019 at Hitec University, Taxila, Pakistan.
3. One day National Workshop on "Latest Trend in Computational Mathematics and its Applications" at Abdus Salam School of Mathematical Sciences (ASSMS), GC University, Lahore, Pakistan in July-2021.

1. Shoaib Ahmed (MSc Mechanical Engineering)
2. M. Muneeb Rasheed (MSc Mechanical Engineering)
3. Junaid Khan (MSc Mechanical Engineering)
4. Muhammad Mubashir Iqbal (PhD Mechanical Engineering)