List View
One Page View
Name Dr. Nazeer Ahmad Anjum
Designation Assistant Professor
Department Mechanical Engineering (Taxila)
Highest Qualification Ph.D. Mechanical Engineering
Specialization Material Strengthening Techniques without using alloying elements
Phone No 051-9047692
Cell No 0300-5397864
Fax No 051 9047420
Email [email protected]

PhD.   In Mechanical Engineering Specialization in “Applied Mechanics and Design”, D,epartment of Mechanical Engineering, University of Engineering & Technology Taxila (www.uettaxila.edu.pk), August 2016, Pakistan (CGPA 3.57). Thesis Title: “Mechanical Characterisation of Al-6061 Strengthened by ECAP”. (Supervisor: Dr. M. Zubair Khan, Co-Supervisor: Dr. Masood-ur-Rehman Shah)

M. Sc.    In Mechanical Engineering Specialization in “Applied Mechanics and Design”, Department of Mechanical Engineering, University of Engineering & Technology Taxila, December 2007, Pakistan (CGPA 3.50). Thesis Title: “Notch Fatigue Behaviour in Aluminium due to Rotating four Point Bending” (Supervisor: Prof. Dr. M. M. I. Hamouda)

B. Sc. Eng.      In Mechanical Engineering, Department of Mechanical Engineering, University of Engineering and Technology, Taxila, December 2004, Pakistan (85.44%). Project Title “Drill Stem Testing techniques and study of equipment”  (Supervise: Prof. Dr. Shahab Khushnood)

DCS       Diploma in Computer Science, Punjab Board of Technical Education, Lahore May 2000 with ‘A’ grade.

DAE       Diploma of Associate Engineer, Punjab Board of Technical Education, Lahore March 1982 with First position.

SSC        With Science subjects from Board of Intermediate & Secondary Education, Sargodha, September 1977 with ‘A’ grade.

Research areas of interest include evaluation of mechanical properties of advanced materials, fracture and failure analysis, metal forming, advanced material strengthening techniques, fractograpgy and morphology and fatigue of metals.

1.     R. Atta, N. A. Anjum, et al., “Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading”, 2013, Life Science, ISSN 1097-8135, Page 1 – 6.

2.     N. A. Anjum, Zubair Khan et al., “Shear Strain Model for Equal Channel Angular Pressing in High Elastic Extruded Plastics”, The Nucleus 52, No. 4 (2015) 169-175,  I S S N 2 3 0 6 - 6 5 3 9.

3. S. Mehmood, Masood Shah, N.A. Anjum et. al, “Comparative Study of White Layer Characteristics for Static and Rotating Workpiece during Electric Discharge Machining”,Oct, 2017 Mehran University Research Journal of Engineering & Technology, Vol 36, No. 4, Page 819-830, No. MUET/MS NO. 10267/Publication/ Acceptance on 16-08-2016, ISSN: 02547821, ISSN: 2413-7219.

4. Waqas Anwar, Nazeer A. Anjum, et al. “Effect of structural dynamic characteristics on fatigue and damage tolerance of aerospace grade composite materials”, 23rd January, 2017, Journal of Aerospace Science and Technology, ISSN: 1270-9638, IF 1.751, 64(2017), Page 39-51

5. Shahid Mehmood, Nazeer Ahmad Anjum, et al.  “Determination of Residual Stress distribution in high Strength Aluminum alloy after EDM”, March 1st, 2017, Advances in Science & Technology Research Journal, Volume 11, Iss. 1, Page 29-35, DOI: 10.12913/22998624/68729

6. N. A. Anjum, S. Anjum, et al. “Notch Fatigue Behavior of Aluminum 2024-T6 in Four Point Bending Rotation” April, 2017, Technical Journal of University of Engineering & Technology Taxila, Pakistan, Vol. 22 No. I-2017, page 81-85.

7. Asad Ali, Mirza Jahanzaib, Wasim Ahmad, Salman Hussain, Nazeer Ahmad Anjum, ” Evaluating the effects of as-casted and aged overcasting of Al-Al Joints”, Feb-2018, The International Journal of Advanced Manufacturing Technology, Vol 96,  pp 1377-1392.

8. N. A. Anjum, Masood Shah, Waqas Anwar, et al. “Design, Fabrication and Manufacturing of 100 Ton Hydraulic Press to Perform Equal Channel Angular Pressing (ECAP)” June, 2017, Technical Journal of University of Engineering & Technology Taxila, Pakistan, Vol. 22, No. 2-2017, page 73-77.

9. Saba Anjum, Masood Shah, N. A. Anjum, et al. “Machining and Surface characteristics of AISI 304L after electric discharge machining for Copper and Graphite electrodes in different dielectric liquids”, August-2017, Engineering, Technology & Applied Science Research (ERASR), Vol. 7, No. 4, 2017, page 1765-1770, ISSN (e/p): 1792-8036, 2241-4487.

10. Habib uallah, Muhammad Amjad, Saeed Badshah, Nazeer Ahmad Anjum et al. “Characterization of Tidal Current Turbine Dynamics Using Fluid Structure Interaction (FSI)”, Sep-2017 , T Technical Journal of University of Engineering & Technology Taxila, Pakistan, Vol. 22, No. 3, 2017, page 58-63. .

11. Mujahid Badshah, Saeed Badshah, N. A. Anjum, et al.Research Progress in Tidal Energy Technology- A Review, Dec-2017, Technical Journal of University of Engineering & Technology Taxila, Pakistan, Vol. 22, No 4, 2017, Page 42-54.

12.  R. A. Pasha, Huda Hanif Khan, M. Ali Nasir, N. A. Anjum, Hafiz Wasif Sardar, Effect of Rubber particles on impact resistance of Kevlar Fiber Reinforced Polymer composite against High Velocity Impact.” Technical Journal of University of Engineering & Technology Taxila, Pakistan,  March-2018, Vol. 23, No 1, Page 35 - 42

13. Aneela Wakeel, Muhammad Ali Nasir, Riffat Asim Pasha, Jarair Shafique, N. A. Anjum “Experimental and Numerical Simulation of Brinell Hardness Test of AL7075 ALCLAD T6 in ABAQUS”, Technical Journal of University of Engineering & Technology Taxila, Pakistan, March-2018, Vol. 23, No 1, 2018, Page 59 - 63.

14. Shahid Mehmood, N. A. Anjum , Waqas Anwar, Rana Atta ur Rahman, Kamran Javed, Saeed Badshah, “A Review of the Effect of Electric Discharge Machining On the Surface Integrity of Metallic Parts”, August, 2018, The Nucleus, Vol. 55, No. 1 (2018) 38-46,  I S S N  2 3 0 6 - 6 5 3 9.

15. S. Hassan, M. M. Tahir, S. Badshah, A. Hussain, N. A. Anjum, "Classification of rigid rotor faults using time domain features extracted from multiple vibration sensor"s. Technical Journal of University of Engineering & Technology Taxila, Pakistan, March-2018, Vol. 23, No 3, 2018, Page 43 - 52.

16. Nazeer Ahmed Anjum, Shahid Mehmood, Waqas Anwar, Zahid Sulman, and Saeed Badshah “Augmentation of Fatigue and Tensile Strength of AA-6061 Processed through Equal Channel Angular Pressing”, accepted in Mehran University Research Journal of Engineering & Technology. 30th  May, 2018 SSN: 02547821, ISSN: 2413-7219.

 

i)      Fatigue behavior of Forged Al6XXX Under different deformation conditions having worth Rs. 210,000/- funded by UET Taxila.

ii)     Preparation of Aluminum FCGR specimens from raw Extruded Rods having worth Rs. 7,30,000/-- funded by UET Taxila.

                  

Incharge: Performed duties as incharge of different labs of MED as: Mechanics of Materials, Mechanics of Machines, Mechatronics, Drawing hall, CAD, Fracture Mechanics.

Incharge Workshops: Mechanical Engineering Department, UET, Taxila Workshops: Machine shop (Lathes, Drill Machine, Milling Machine), Carpentry Shop (Sawing Machines), Fitting Shop (Metalworking Vises), Electric Shop

Director : Performed Duties as Director Gardening in Gardening Section at UET Taxila for nearly Three ears

Advisor: 

1. Performed duties as an advisor of Environment Protection Society of UET Taxila for a period of four years.

2. Performing duties as an advisor of Quaid-e-Azam Debating Society (QDS) of UET Taxila since 2012

Chief Coordinator: Student week 2015, 2016

Hostel Warden: 

1. Perforing duties of Warden in Abbu Bakar Halll since 07-11-2017.

2. Perforing duties of Warden of Foreign Faculty Hostel since 2018.

 

i)      Worked as Lab. Supervisor in Mechanical Engineering Department in different Labs. w.e.f 06-12-1983 to 20 -05-2005

ii)      Performed duties as Teaching Research Associate from 21-05-2005, then permoted as Lecturer

iii)    Currently working as Assistant Prof. in MED, UET Taxila

Life time Member: Pakistan Engineering Council

Member: American Society of Mechanical Engineers

 

 

                 

I am teaching following subjects being taught in different semesters of Undergraduate classes:

1. Engineering Drawing & Graphics

2. Machine Design & CAD-I

3. Finite Element Methods

4. Introduction to Mechatronics

5. Workshop practices

I am teaching following subjects being taught in different semesters of Postgraduate classes:

1. Research Methodology & Design of Experiments

2. Finite Element Analysis

i)     Award of certificate of Merit in recognition of distinguished contribution to cultural and social life of University College of Engineering Taxila.

ii)    Award of certificate of standing on DEAN’S list’ for Second position in 3rd term.

iii)   Award of certificate of Merit for obtaining 4th position in Mechanical Engineering Degree Program.

v)    1st position in 1st Design, Build and Fly Contest held at GIKI March 2006.

iv)    1st position in 2nd Design, Build and Fly Contest held at GIKI March 2007.

vi)      2nd position in 3rd Design, Build and Fly Contest held at GIKI March 2008.

i)      Award of certificate of Merit in recognition of distinguished contribution to cultural and social life of University College of Engineering Taxila.

ii)     Award of certificate of standing on DEAN’S list’ for Second position in 3rd term.

iii)    Award of certificate of Merit for obtaining 4th position in Mechanical Engineering Degree Program.

iv)    1st position in 1st Design, Build and Fly Contest held at GIKI March 2006.

v)      1st position in 2nd Design, Build and Fly Contest held at GIKI March 2007.

vi)      2nd position in 3rd Design, Build and Fly Contest held at GIKI March 2008.

i)    Waqas Anwar, Nazeer A. Anjum, et al., “Usage of Crack Growth Prediction Software Codes for Life Assessment of Aerospace Structures at FEMS (22-23 October 2007) UET Taxila”.

ii)   Waqas Anwar, Nazeer A. Anjum, et al., “Monitoring of Crack Growth Behavior in Aerospace Grade Materials Using Notched Specimen at 6th International Bhurban Conference on Applied Science & Technology.”

iii)   Ghulam Mustafa, Nazeer A. Anjum, et al., Structural Design and Optimization of composite Wind Turbine Blade Under Fatigue Loading at 7th  International Bhurban Conference on Applied Science & Technology dated January 11th – 14th , 2010.

i)       Participated and presented a research paper in the “International Conference of Failure of Engineering Materials & Structures (FEMS) (22 – 23 October, 2007), organized by UET Taxila, Pakistan”

 

Supervised the following M. Sc Thesis

1. "Investigation and Analysis the effect of EDM parameters on Tribolical Characteristics of AISI-304L" done by Muhammad Adnan, Registration No. 15-MS-PT-AMD-03, in 2018.

2.  "Effect of Nano Fluid Lubricant on surface Characterization of Aluminium Alloy" done by Abdur Rehman, Registration No. 16-MS-PT-AMD-02

3. "Investigation of cutting parameters using MQL optimum technique in turning process" done by Rehan Saghir, Registration No. 16-MS-PT-AMD-08

Projects Supervised Undergraduate

  1.  Design and Fabrication of Remote Control Aircraft
  2. Design, Modeling and Analysis of Gas Turbine Blade.
  3. Design of Low Cost Gas Turbine for UAV Application.
  4. A study Report on Compression and Transmission of Natural Gas.
  5. Modeling of Locomotive Bogi for Pakistan Railway Using CATIA.
  6. Blade Analysis and Design of Shaft & Gear Train of Wind Turbine
  7. Life Assessment & Stress Analysis of Pipes and Pressure Vessels of a Petro-Chemical Plant (Case Study of Dakhni Gas Processing Plant).
  8. Stress Analysis of a Primary Structural Frame of a Fighter Aircraft.
  9. Design and Fabrication of Multi-Stage Rocket System (WEC).
  10. Design and Fabrication of a small CNC Drilling Machine.
  11. Design and Fabrication of Aircraft Wing and CFD Analysis of its Airfoil.
  12. Designing, Fabrication and Testing of Pressure Vessels.
  13. Design, Analysis and fabrication of RC-Plane.
  14. Design, Simulation and Manufacturing of Fire Fighting System Using NPFA Codes
  15. Design, Modeling and Fabrication of Remote Control Hovercraft.
  16. Design, Modeling, Fabrication and Analysis Rotor of Cross Flow Impulse Turbine and Implementing it on Multi Turbine Test set.
  17. Design optimization of 90o Elbow using ABAQUSTM in collaboration with Elke Steel and Metal Works, Abu Dhabi, UAE.
  18. Design and Fabrication of Airborne Wind Turbine.
  19. Study of Underbalanced Drilling Tools, Techniques and Importance in the field of Oil and Gas.
  20. Design and Fabrication of Leaf Log Maker Machine.
  21. Mechanical Characterization of AA-6061-T6 Processed Through Friction Stir Welding.
  22. Stud and Designing of Dual Clutch Transmission System.
  23. Analysis and Simulation of Crack Propagation of CT Specimen of AA 6061 b using XFEM.

Attend the following courses. 

i)      One and a half Month training on " Pro/Engineer software training " attend at  UET Taxila from  July 1st to August 16th, 2001 .

ii)     Two days workshop on “Literature Review-Made Easy” at UMT Lahore from December 14 - 15, 2012.

iii)      Three days training on “Fracture and Fracttography” at Institute of Space Technology Islamabad from September 02 – 04, 2013.

iv)     Three days training on " Fatigue life and Damage Tolerance Assessment " attend at  Institute of Space Technology Islamabad from  August  8 – 10, 2016.

v)    Three days training on " Corrosion and its Prevention" at  NINVAST Islamabad from  November 28 to 30, 2016

vi)     One day lecture on " Manufacturing Processes in Industry " attend at  Heavy Mechanical Complex Taxila from  October 19, 2016

vii)     Three days training on " Rolling Element & Journal Bearing Fault Analysis" at  Center for Vibration Analysis and Condition Monitoring CVACM, DNPER, PAEC, Islamabad from  November 20 - 22, 2017.

Applied Mechanics & Design

  1. Engr. Prof. Dr. Riffat Asim Pasha
  2. Engr. Muhammad Ali Nasir
  3. Engr. Dr. Nazeer A. Anjum
  4. Engr. Dr. Azhar Hussain
  5. Engr. Dr. Waqar Ahmad Qureshi
  6. Engr. Sana Zulfiqar
  7. Engr. Rana Atta ur Rahman
  8. Engr. Muhammad Sajjad Sabir Malik
  9. Engr. Abdul Rehman