List View
One Page View
Name Dr. Imran Hafeez
Designation Professor
Department Civil Engineering (Taxila)
Highest Qualification Ph.D
Specialization Transportation Engineering
Phone No +92519047662
Cell No +923334228382
Fax No +92519047650
Email [email protected]

 

Ph.D Transportation Engineering, University of Engineering & Technology, Taxila, Pakistan 2009

M.Sc Transportation Engineering, University of Engineering & Technology, Taxila, Pakistan 2005.

B.Sc Engineering (Civil), University of Engineering & Technology, Lahore, Pakistan 2000.

B.A   Journalism (Arts), University of the Punjab, Lahore, Pakistan 1998.

F.Sc (Pre.Engg.) Lahore Board of Education, 1994

Matric (Science) Lahore Board of Education, 1992

Research Statistics

Published Papers

Impact Factor (W-category) Journals

HEC Recognized local (X/Y/Z Category)

International/National Conference Papers

International Journal Papers (other than w-category)

              44

                18

               41

               18

Total= 119

Total Research Publications =119  [Journal Publications = 78]

Scopus Citations Index = 600, Scopus h-index=16, i-10th index=2,

 Google Scholar Index = 971, h-index= 18, I 10-index= 28.

  Author ID: 26023218000, ORCID = orcid.org/0000-0001-8140-6384.

List of Journal Papers reviewed as Reviewer (peer reviewed journals)

Serial No.

Journal Name

Paper ID

Total Paper Reviewed

1

Journal of Testing and Evaluation, ASCE

JTE-2018-0214, JTE-2018-0731

 

2

2

International Journal of Pavement Engineering, ASCE

GPAV-2024-0053, GPAV-2024-0224, GPAV-2024-0117R1, 2024-0126, 2024-0117, 2024-0053R1, 2023-0788R1, 2023-0684, 2023-0788, 2023-818, 2023-0514R1, 2023-0514, 2022-0692R2, 2023-470R1, 2023-0083, 2022-00767, GPAV 22-724R2, 23-095, 23-099, 23-068, 22-806, 22-0762, 23-0272R1, 23-0255, 23-095R1, 23-0272, 22-0666, 21-0622, 21-0242, 21-395, 21-0185, 20-0556, 20-0504, 20-0415, 20-0127, 19-0532, 19-0191, 19-0190, 19-035, 18-0358, 17-0360R1, 17-0444R1, 17-0444R1, 17-0359, 17-058, 16-0362, 16-0173, 15-0273, 15-0268, 15-0131, 15-0015, 15-040, 14-109, 13-0117R, 13-0117.

55

3

Advances in Civil Engineering Materials, HINDAWI

ID 3761537, ACEM-17-0024

 Hindawi-6684905, Hindawi-8292632, Hindawi-5549891, JE-1261368

6

4

Construction and Building Materials

CONBUILDMAT- D-24-01819, D-23-014594R1, D-24-01819R1, D-23-01494, D-23-014594, D-23-011354R1, D-23-011354, D-23-01534, D-23-14486, D-21-03449, D-21-11539,

D-20-00401, D-19-02573, D-18-06061, D-18-01701, D-17-05119, D-17- 02082,

D-17-04873, D-17-02011, D-12-01192, D-20-06718, D-20-04337,

22

5

Road Materials and Pavement Design

RMPD-15-8-13, RMPD-17-3-15, RMPD-15-9-28, RMPD-15-9-16, RMPD-15-11-23, RMPD-15-9-12,

6

6

Canadian Journal of Civil Engineering

cjce-2015-0066, cjce-2020-0550

3

7

Journal of Traffic and Transportation Engineering

JTTE-D-23-00265, JTTE-D-23-0051, JTTE-D-19-0058,

2

8

Journal of Urban, Planning and Transport Research

RUPT-2023-0030

1

9

International journal of Pavement Research and Technology

JPRT-D-23-00287, JPRT-D-23-00280 R2

2

10

Journal of Asian Architecture and Building Engineering

JAABE2303106BS

 

1

11

Journal of Data in Brief

DIB-D-23-01977

1

12

Technical Journal UET Taxila

12/19/23,

1

13

Data in Brief

DIB-D-23-01977R1, DIB—23-01977R

2

14

Measurement and Control

MAC-23-0323

1

 

 

Total reviewed

105

 

 

Pavement Material Characterization, Modelling, Analysis and Design of pavement structure and assessement of pavement perfromance. 

List of Publications

Published in International /National Journals

  1. Moazam Sattar, Imran Hafeez, Muhammad Waleed, Raja Abubakar Khalid, 2024. “Assessing the asphalt mixture's self-healing with microwave induction for enhanced durability and structural restoration.” Accepted in ASCE's Journal of Transportation Engineering, Part B: Pavements, X.
  2. Safeer Haider, Muhammad Naqeeb Nawaz, Imran Hafeez, Muhammad Muneeb Nawaz, Marc Azab, Moavia Hassan, 2024. “Mathematical formulation for predicting moisture damage indices using gene expression programming” Construction and Building Materials. 426 (2024). https://doi.org/10.1016/j.conbuildmat.2024.136146. I.F 7.693
  3. Farhan Qadir, Imran Hafeez, 2024. “Effect of Impregnated organophilic(hydrophobic) nano clay on asphalt binder properties and performance, Construction and Building Materials. 419 (2024). https://doi.org/10.1016/j.conbuildmat.2024.135577. I.F 7.693
  4. Shoaib Mujtaba, Imran Hafeez, 2023. “Effect of Stress levels and temperature on stress recovery of asphalt binders”. International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653; IC Value: 45.98; Volume 11 Issue I, January 2023.
  5. Muhammad Maad Raza, Imran Hafeez, 2023. “Effect of Stress levels and temperature on creep compliance of asphalt binders”. International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653; IC Value: 498; Volume 11 Issue I, January, 2023.
  6. Ahsen Hamid, Naveed Ahmad, Bilal Zaidi, Raja Abubakar Khalid, Imran
    Hafeez, Jawad Hussain, Anwar Khitab, Mehmet Serkan KIRGIZ. 2023. GlasSphalt: A borosilicate-based engineering material for various
    purposes. MDPI. Sustainability 2023, 15, 4277. https://doi.org/10.3390/su15054277. I.F.0.5
  7. M. Fanoos Ahmad, I. Hafeez, F. Qadir, 2022. Moisture Susceptibility of Organophilic Nano Clay Modified Asphalt Mixtures. SSRG International Journal of Civil Engineering. Volume 9 Issue 9, 13-21, September 2022. ISSN: 2348-8352 / https://doi.org/10.14445/23488352/IJCE-V9I9P103.
  8. Awais Qarni, Imran Hafeez, 2022. “Characterization of Nanoclay modified Asphalt Cement.” International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653; IC Value: 45.98; Volume 10 Issue IV, April 2022.
  9. Umar Waqas, Imran Hafeez, Usama Saadat, 2022. “To study the Effect of Organophilic Nano-clay on Creep Stiffness of Asphalt Binder at Low Temperature. International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653; IC Value: 45.98; Volume 10 Issue VIII August 2022.
  10. Ammar Ahmed, Imran Hafeez, 2022. To Study the Mixing and Compaction Temperatures of Organophilic Nanoclay Modified Asphalt Binder. “International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653; 45905; Volume 10 Issue VII, July 2022
  11. Anam Riaz, Imran Hafeez 2022. “Characterizing the Bituminous Material by Using Graphical Techniques “International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653; 45.98; Volume 10 Issue IV Apr 2022
  12. Nadeem Khan, Imran Hafeez. 2022. “Moisture damage assessment of asphalt mixture using Eatons reagent”. International Journal for Research in Applied Science and Engineering Technology, 10(IV), IJRASET 41708.
  13. Shan, A., Hafeez, I., Hussan, S., Jamil, M.B. 2022. Predicting the laboratory rutting response of asphalt mixtures using different neural network algorithms, International Journal of Pavement Engineering. 23(6), pp. 1948–1956. https://doi.org/10.1080/10298436.2020.1830282. I.F 1.832.
  14. Fayaz Rashid, Imran Hafeez. 2021. Analysis and Determination of Axle Load Spectra and Traffic Input for Pavement Design” in International Journal for Research in applied Science and Technology (IJRASET). Volume 9 Issue VIII August 2021.
  15. Ghulam Yaseen, Wesam Salah Alaloul, Imran Hafeez, Abdul Hannan Qureshi. 2021. “Shape Characterizing of Aggregates Produced Through Different Crushing Techniques” MDPI Journal, Coating: 11(10), 1199; ISSN;2079-6412, https://doi.org/10.3390/coatings11101199 I.F.2.972
  16. Safeer Haider, Imran Hafeez, Sabahat Hussain, 2021. “A step towards smart city and green transportation:Eco-friendly waste PET management to enhance adhesion properties of asphalt mixtures” Construction and Building Materials.304 (18). https://doi.org/10.1016/j.conbuildmat.2021.124702. I.F 4.419
  17. Rafiullah, Imran Hafeez. 2021 “Evaluating the effect of plastomers modified asphalt mixtures on high/low temperature performance”. Mehran University journal of engineering and technology. 40(3): 680-691, july 2021. ISSN 2413-7219. https://doi.org/10.22581/muet1982.2103.20. (Y-Category).
  18. Fazli Karim, Jawad Hussain and Imran Hafeez, 2021. Estimating the Asphalt Binder Film Thickness Using Scanning Electron Microscope and Energy Dispersive X-Ray Spectroscopy. Hindawi Advances in Materials Science and Engineering Volume 2021, Article ID 8894970, 16 pages https://doi.org/10.1155/2021/8894970. I.F 2.972
  19. Muhammad Tufail, Jawad Hussain, Hammad Hussain, Imran Hafeez, Naveed Ahmad. 2021 “Analysis of Rural Roads in Developing Countries Using Principal Component Analysis and Simple Average Technique in the Development of a Road Safety Performance Index “. World Academy of Science, Engineering and Technology International Journal of Transport and Vehicle Engineering Vol:15, No:3, 2021
  20. Mahmood Ahmad Sulahri, Imran Hafeez. 2021. Permeability of asphalt mixtures with Bailey and Conventional aggregate gradations. Arabian Journal for Science and Engineering. g https://doi.org/10.1007/s13369-020-05300-0. Nov2021, Vol. 46 Issue 11, p10869-10884. 16p. I.F 1.711
  21. Malik Farooq, Bilal Zaidi. Ayyaz fareed, Naveed Ahmed & Imran Hafeez. 2021. Assessment of sugar cane bagasse bio-oil as an environmental friendly alternative for pavement engineering applications. International Journal of Pavement Engineering. https://doi.org/10.1080/10298436.2020.1870114, I.F. 2.298
  22. Gohar Alam ,Imran Hafeez,Akhlaq Aman &Ghulam Yaseen, 2021. Effect of binder modification and thermal conditioning on asphalt binder rheology. https://doi.org/10.1080/02533839.2020.1856727. Journal of the Chinese Institute of Engineers. I.F. 0.667
  23. Ullah, R., Hafeez, I., Zaidi, S.B.A., Jamal,, Haider, S. 2020.“Study the effect of substitution filler on performance of asphalt mixture”. Civil Engineering Journal-Tehran (Iran), 2020, 6(9), pp. 1704–1714. ISSN 2476-3055. http://dx.doi.org/10.28991/cej-2020-03091576.  (X-category).
  24. Gohar Alam , Imran Hafeez , Ghulam Yaseen , Muhammad Ali Nasir , Azhar Hussain & Naveed Ahmad, 2020. Assessing the aging tendency of asphalt binder using a thermal cycler. International Journal of Pavement Engineering, DOI: 10.1080/10298436.2020.1861279. I.F 2.298.
  25. Ayyaz Fareed, Bilal Zaidi, Naveed Ahmad, Imran Hafeez. 2020. “Use of agriculture waste ashes in asphalt binder and mixture: A sustainable solution to waste management” Construction and Building Materials. Vol_259, ISSN:0950-0618, Page_120575. DOI: 10.1016/j.conbuildmat.2020.120575. I.F 4.046.
  26. Ghulam Yaseen, and Imran Hafeez, 2020. Effect of Cereclor as Rejuvenator to Enhance the Aging Resistance of Reclaimed Asphalt Pavement Binder. Materials, Coating;1996-1944,13, 1582. 2020 Mar 30;13(7):1582. doi: 10.3390/ma13071582. I.F.2.972
  27. Akhlaq Aman, Imran Hafeez, 2020. “Influence of Phosphorous Methyl Compound On Asphalt Binder” International journal of Pavement engineering, I.F 2.298 (2020): 1-15. https://doi.org/10.1080/10298436.2020.1726349
  28. Safeer Haider, Imran Hafeez, Jamal, Rafiulla. 2020 “ Sustaiable use of waste plastic modifiers to strengthen the adhesion properties of asphalt mixtures.” Construction and Building material. Volume 235. doi: 10.1016/j.conbuildmat.2019.117496. I.F 4.046
  29. Nawazish Ali, I. Hafeez, M.A. Baluch 2020. “Performance Evaluation of Composite Asphalt Binder” The International PEAT Journal, Liverpool Jhon Moorse (LJMU) University, UK. DOI-10,-D-,1515IJPEAT20160037.
  30. Safeer Haider, ImranHafeez, Syed Bilal, Ahmed Zaidi, MuhammadAli Nasir, M.Rizwan, 2019. “A pure case study on moisture sensitivity assessment using tests on both loose and compacted asphalt mixture”. Construction and Building material. Volume 239. https://doi.org/10.1016/j.conbuildmat.2019.117817. I.F 4.046
  31. Abdul Waheed, Imran Hafeez. 2018. Experimental Development of Soil Modification for clay liners in Arid/Semiarid Regions. Journal of the Chinese Institute of Engineers. 41:8 Page687-696. https://doi.org/10.1080/02533839.2018.1534613.   I.F 0.665
  32. Jamal, Imran Hafeez, Gulam Yaseen, Ayaz Aziz. 2018. “Influence of Cereclor on performance of aged asphalt binder. International Journal of Pavement Engineering (IJPE).DOI: 10.1080/10298436.2018.1542694.  I.F 2.231
  33. Sabahat Hussain, Mumtaz Ahmad Kamal, Imran Hafeez, 2018 Modelling and correlating rut depth observed in different asphalt mixture performance tests. Mehran University Research Journal of Engineering and Technology, [S.l.], v. 37, n. 3, p. 553-570, July 2018. ISSN 2413-7219. [x-category].
  34. Sabahat Hussain, Mumtaz Ahmad Kamal, Imran Hafeez, Naveed Ahmad. 2018 Modelling asphalt pavement analyser rut depth using different statistical techniques. Journal: Road Materials and Pavement Design (RMPD). Vol_21, Page 117-142, Doi: 10.1080/14680629.2018.1481880. I.F 1.832
  35. Yasir Ali, Muhammad Irfan, Imran Hafeez, Muhammad Zeeshan Shafeeq Ahmed, 2018. Revisiting the relationship of dynamic and resilient modulus test for asphaltic concrete mixtures. Construction and Building Materials 170 (2018) 698–707. I.F 3.169
  36. M. Irfan, Y. Ali , S. Ahmed  , I. Hafeez 2017. “Rutting evaluation of asphalt mixtures using static, dynamic and repeated creep load tests" Arabian Journal for Science and Engineering. 43(2018):5143-5155. 24th Nov. 2017. DOI 10.1007/s13369-017-2982-4. I.F 0.867
  37. Imran Hafeez ,Arshad Jamal , 2017. " A Field and Laboratory Based Study to Ascertain Degradation in The Signage Retro Reflectivity " , International Journal of Management and Applied Science (IJMAS) , pp. 30-34, Volume-3,Issue-10. ISSN 2394-7926.
  38. Hussan S., Kamal M. A., and Hafeez I., (2017) “Evaluation and modelling of permanent deformation behavior of asphalt mixtures using dynamic creep test in uniaxial mode.” International Journal of Pavement Engineering. 20 (9):1026_1043, doi.org/10.1080/10298436.2017.1380805. I.F 1.832.
  39. Hussan S., Kamal M. A., and Hafeez I., Ahmad N. (2017) “Comparing and Correlating various laboratory rutting performance tests” International Journal of Pavement Engineering (IJPE). 20 (10):1239-1249. http://dx.doi.org/10.1080/10298436.2017.1380805. I.F 1.832.
  40. I.Hafeez, A. Shan, A. Ali, I. Ahmad. 2017. “Flexible Pavement Design Optimization Using Mechanistic-Empirical Approaches”. Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan. Vol. 22, No. 2, 2017.
  41. Muhammad Irfan, Yasir Ali, Sarfraz Ahmed and Imran Hafeez. 2017 “Performance Evaluation of Crumb Rubber Modified Asphalt Mixtures Based on Laboratory and Field Investigations” Arabian Journal for Sciences and Engineering. 43:1795-1806  DOI 10.1007/s13369-017-2729-2. I.F 0.867
  42. Sabahat Hussain, M.A. Kamal. Imran Hafeez. 2017. Statistical evaluation of factors affecting the laboratory rutting susceptibility of asphalt mixtures. International Journal of Pavement Engineering, ASCE.  doi.org/10.1080/10298436.2017.1299527. I.F 1.832
  43. Imran Hafeez, 2017 “Investigating the creep response of asphalt mixtures under waveform loading”. Journal of Road Materials and Design, ASCE. 1–18, DOI:10.1080/14680629.2017.1279071. I.F 1.401
  44. I. Hafeez. 2016. “Characterizing the subgrade soil using local modifiers.” Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan. 21(III):26–34.
  45. M.A. Kamal, S.Shahid, M.U. Arshid, I. Hafeez. 2016. “Performance and comparison of crumb rubber modified and conventional mixes under varying temperature and stress levels.” Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan. 21(II):10–13
  46. Imran Hafeez, 2016 “An experimental study to develop bituminous based crack sealant using rheological data” Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan. 21(1):24–30.
  47. Imran Hafeez, Faisal Junaid, M.A. Kamal, Jawad Hussain, 2015.  “Influence of single and two-stage aggregate manufacturing mechanism on asphalt mixture's performance” Journal of Materials in Civil Engineering, ASCE. 28(4): 10.1061/(ASCE)MT.1943-5533.0001480 , 04015180. (I.F 1.295).
  48. Imran Hafeez, M.A. Kamal, Kashif Riaz, Imran Khan. 2015. “A laboratory Experimentation Based Ranking of Margalla Crush Aggregate” Technical Journal, University of engineering & Tech.(UET), Taxila. 20(III):62–67.
  49. Imran Hafeez, M.A. Kamal, M.A Ishaq, N.Ahmad,S. Khanzada. 2015. “A Laboratory Based Research Study to Investigate the Aggregate Packing Characteristics and Its Influence on Asphaltic Mixtures Performance.” Arabian Journal of Science and Engineering. 40(11):3119–3134. (DOI) 10.1007/s13369-015-1804-9. (I.F 0.367)
  50. M.U. Farooqi, N. Ahmad, M.A. Kamal, J. Hussain, I. Hafeez, K. Riaz. 2015. “Analysis of moisture susceptibility of different loose coated asphalt mixtures”. Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan.
  51. Imran Hafeez, Kamal, M.A., 2014. “An experimental based approach to predict asphalt mixtures permanent deformation behaviour. The Arabian Journal of Sciences and Engineering. 39(12):8681­–8690. doi:10.1007/s13369-014-1453-4. (I.F 0.367)
  52. Imran Hafeez, Kamal, M.A., Waseem Mirza 2014. “Assessing Rutting Potential of Stone Mastic Asphalt using Wheel Tracker and Dynamic Modulus Testing, The Baltic Journal of Roads and Bridges, Lithuania, 9(4): 325-332. (I.F 1.053)
  53. Imran Hafeez, Kamal, M.A., Waseem Mirza. 2014. “An experimental study to select aggregate gradation of stone mastic asphalt, Journal of Chinese Institute of Engineer. 38(1):1–8. DOI:10.1080/02533839.2014.953242. (I.F 0.241)
  54. Imran Hafeez, M.A.Kamal. 2014. “Creep Compliance: a parameter to predict rut performance of asphalt binder and mixtures. Arabian Journal of Sciences and Engineering. 39 (8): 5971-5978, DOI 10.1007/s13369-014-1216-2. (I.F 0.367)
  55. Imran Hafeez, Hassan Ozer, Imad Al-Qadi, 2014 “Performance characterization of In-place Re-heat recycled mixtures.” Journal of Transportation Engineering, USA. 140:(8). DOI.10.1061/(ASCE)TE.1943-5436.0000679. asce (I.F 0.877)
  56. Hussain M, Hafeez I, Kamal.M.A, T. Faisal, Z. Muhammad, Q A Muhammad. 2013. The Evaluation of Structural Performance of New Benazir Bhutto International Airport Islamabad, Pakistan. Life Sci J 2013;10(12s):647-652] (ISSN:1097-8135). http://www.lifesciencesite.com. 104. (I.F 0.165)
  57. Hussan S., Kamal M.A., Khan M. B., Irfan M., Hafeez I. 2013. “Determining the Contribution of Different Structural Layers of Asphalt Pavement System to Rutting Using Transverse Profile Analysis.” American Journal of Civil Engineering and Architecture, 2013, Vol. 1, No. 6, 174-180 Available online at http://pubs.sciepub.com/ajcea/1/6/7 © Science and Education Publishing DOI:10.12691/ajcea-1-6-7.
  58. Riaz K, Hafeez I, Khitab A, Hussain M, Ali F, Ashiq S Z, Tariq M.K, Ahmed I. 2013. Comparison of Neat and Modified Asphalt Binders Using Rheological Parameters under Virgin, RTFO and PAV Aged condition. Life Sci J 2013;10 (3):2041-2047] (ISSN:1097-8135). (I.F 0.165)
  59. Imran Hafeez, M.A., Kamal, M.W Mirza, Barkatullah, S. Bilal, 2013, “Laboratory fatigue performance evaluation of different field laid asphalt mixtures”. Construction and Building Materials, UK, 44(2013) 792-797. (I.F 2.265)
  60. Imtiaz Ahmed, Imran Hafeez, Syed Zishan Ashiq, Kashif Riaz, Bilal Ahmed Zaidi, M. Hassan, (2013). Impact Evaluation of Locally Available Modifiers for Stabilization of Subgrade soil through Triaxial and Impact Hammer Testing Techniques.” International Journal of Scientific & Engineering Research, Volume 4, Issue 4, April-2013.
  61. Afzal M, Hafeez I, Zaidi B, Riaz K, Khitab A, Hayat A, Khan I, Farooqi U, Asif A. 2013. Sensitivity Analysis of Design Variables of Flexible Pavement Design Equation in the AASHTO 1993 Design Guide. Life Sci J 2013;10(12s):878-882]. (ISSN:1097-8135). http://www.lifesciencesite.com. (I.F 0.165)
  62. Hafeez I, Riaz K, Hussain J, Faisal M, Farooqi U, Hussain S, Khitab A, Naveed M, Hayat A. 2013. A field study of environment degradation during road construction and its improvement due to sprinkling of water. Life Sci J2013;10(12s):888-893]. (ISSN:1097-8135). http://www.lifesciencesite.com. (I.F 0.165)
  63. Hafeez I, Hussain J, Riaz K, Khitab A, Hussain S, Zaidi B, Farooqi U, Hayat A, Ahmed I, Asif A. 2013. Influence of Time and Temperature on Asphalt Binders Rheological Properties. Life Sci J 2013;10(12s):894-898].(ISSN:1097-8135). http://www.lifesciencesite.com. (I.F 0.165)
  64. Hafeez I, Mian I, Zaidi B, Kamal M.A, Ahmed N, Ulla S, Hussain J, Riaz K, Hussain S. 2013. To Study the viscoelastic behavior of Asphalt Binders using under Multi Stress Creep Recovery Test. Life Sci J 2013;10(12s):921-925] (ISSN:1097-8135). http://www.lifesciencesite.com. (I.F 0.165).
  65. Kashif Riaz, Imran Hafeez, Bilal Ahmed Zaidi, Imtiaz Ahmed, Imran Mehmood, Zaheer 2013. Ahsan To investigate Creep behavior of Asphalt Binders using Rheological characteristics. International Journal of Scientific & Engineering Research, Volume 4, Issue 4, April-2013 ISSN 2229-5518 IJSER © 2013 http://www.ijser.org.
  66. MA Kamal, KM Khan, I Hafeez, 2013. Effectiveness of Pedestrian Bridges in Islamabad/Rawalpindi University of Engineering and Technology Taxila. Technical Journal; Vol (18), issue (1), pp/28-33
  67. Imran Hafeez, Kamal, M.A., Ahadi M.R., 2012, “Rutting prediction of asphalt mixtures from asphalt cement”. Transportation Research Journal, Transportation Research Institute, Ministry of Road and Urban Development, Iran, 1 (2012) 25-36.
  68. Imran Hafeez, Kamal, M.A., M. Mahir, 2012. “Characterization of Hot Mix Asphalt Using Dynamic Modulus and Wheel Tracking test”, Proceedings of Pakistan Academy of Sciences, Vol. 49 No. 2, pp 71-77, August, 2012,  ISSN 0377-2969.
  69. Imran Hafeez, Kamal, M.A., Waseem Mirza, Ayaz Aziz, 2012. “Investigating the Effects of Maximum Size of Aggregate on Rutting Potential of Stone Mastic Asphalt, Pakistan Journal of Engineering and applied Sciences, University of Engineering & Technology, Lahore, ISSN 1995-1302, Vol. 10, pp 89-96, January 2012.
  70. Imran Hafeez, Kamal, M.A., Muhammad Reza Ahadi, Qamar Shahzad, Nadia Bashir,  “Performance Prediction of Hot Mix Asphalt from Asphalt Binders, Pakistan Journal of Engineering and applied Sciences, University of Engineering & Technology, Lahore, ISSN 1995-1302, Vol. 11, pp 104-113, July 2012.
  71. Imran Hafeez, Kamal, M.A., Ahadi M.R., Msawil M.J.N, 2011, “Effects of Hydrated Lime on Fatigue and Rutting Behavior of HMA Mixtures in Dynamic Modulus Testing, Transportation Research Journal, Transportation Research Institute, Ministry of Road and Urban Development, Iran, 1 (2011) 23-34.
  72. Waseem Mirza, Imran Hafeez, Kamal, M.A., 2011, “Comparative Study of Empirical and Mechanistic-Empirical Pavement Design Methodology Using Kenlayer Software” International journal of Pavement Engineering and Asphalt Technology, LJMU, Liverpool, UK,ISSN 1464-8164, Vol.12, Issue. 2, pp 50-62.
  73. Imran Hafeez, Kamal, M.A., Waseem Mirza, 2011.“Rutting prediction model of asphalt concrete mixtures using uniaxial repeated creep test” Kuwait J. of Sci. and Engg. ISSN: 1024-8684, Vol. 38 (2B), 45-61, December, 2011. (I.F 0.059)
  74. Imran Hafeez, Kamal M. A, 2011. “Repeated Load Permanent Deformation Behavior of Mixes with and without Modified Bitumen”, Mehran University Research Journal of Engineering & Technology, Jamshoro, Pakistan, Vol. 30, Number 1, January 2011, pp 15-22, ISSN: 0254-7821.
  75. Imran Hafeez, Kamal, M.A., Waseem Mirza, 2011. “Domains of permanent deformation coefficient Alpha and Mu for Hard Grade Asphalt Concrete Mixtures”, Proceedings of Pakistan Academy of Sciences, Vol. 47 No. 1, pp 65-74, March 2010, ISSN 0377-2969.
  76. Imran Hafeez, Kamal M. A, “Effects of Mineral Filler to Polymer Modified Bitumen Ratio on the Design of Hot Mix Asphalt and its Performance”, Mehran University Research Journal of Engineering & Technology, Jamshoro, Pakistan, Vol. 29, No. 4.,pp581-588, October 2010, ISSN: 0254-7821.
  77. Hafeez I., Kamal M.A., Waseem M.W., 2010. “Evaluation of Rutting in HMA Mixtures using Uniaxial Repeated Creep & Wheel Tracker Tests” Pakistan Journal of Engineering and applied Sciences, University of Engineering & Technology, Lahore, ISSN 1995-1302, VOL 7, JULY 2010, pp 52-62.
  78. Imran Hafeez, Kamal M. A, Gohar Ali, 2009. “Assessment of Resistance to Rutting of Asphaltic Materials using a Wheel Tracker”, Journal of Engineering and applied Sciences, N.W.F.P University of Engineering and Technology Peshawar, Vol. 28, No. 2, pp 53-60, ISSN 1023-862X, July-December 2009.
  79. Kamal M. A., Khan M. K., Hafeez I., Kumar K., 2009. “Comparison of CRMB Test Section with Conventional Pavement Section Under the same Trafficking and Environmental Conditions” The Arabian Journal of Sciences and Engineering, Volume 34, No.2B, October 2009, pp415-425, ISSN C. (I.F 0.367)

Paper Published in Conferences

  1. Syed Shabih Ul Hassan, Imran Hafeez, 2024. “Characterizing the aggregate petrography for improvement in asphalt mix performance”. 3rd International Conference on advances in Civil and Env. Engg. At University of Engg. & Tech. Taxila, Pakistan, 21-22 February 2024, Pakistan.
  2. Muhammad Usama, Imran Hafeez, 2024. “Performance evaluation of plastic roads” 3rd International Conference on advances in Civil and Env. Engg. At University of Engg. & Tech. Taxila, Pakistan, 21-22 February 2024, Pakistan.
  3. Abu Bakar Bin Arif, Imran Hafeez, 202 “Evaluation of Trip Generation in single gated community in urban area using trip generation models”, 5th International Conference on emerging trends in engineering, management and sciences (ICETEMS-2023), December 20-23, 2023, City University of Science and Information Technology, Peshawar, Pakistan.
  4. Syed Shabih Ul Hassan, Imran Hafeez, 2023. “Effect of Petrography of aggregate on rutting behavior of asphalt mixture “Technology-enabled civil infrastructure engineering and management (TECH-IEM), 15-16 December 2023, NED University of Engineering and Technology, Karachi, Pakistan.
  5. Naveed Ahmad, Imran Hafeez. 2023. “Effect of Polyethylene on the viscosity and shear rate of bitumen”. 2nd International Conference on advances in Civil and Env. Engg. At University of Engg. & Tech. Taxila, Pakistan.
  6. Safia Kausar, Imran Hafeez., 2023. “Effect of shear rate on shear thinning behavior of asphalt binder modified with organophilic nano clay.” 2nd International Conference on advances in Civil and Env. Engg (ICACEE-2023) At University of Engg. & Tech. Taxila, Pakistan.22-23 February 2023.
  7. Sarmad Kazmi, Imran Hafeez, 2022. “An experimental study on partial replacement of bitumen using waste engine oil and crumb rubber”.  4th conference on sustainability in civil engineering (CSCE’2022), 30-31 August, 2022, organized by Department of Civil Engineering, Capital University of Science and Technology, Islamabad, Pakistan. Paper ID 144.
  8. Adnan Khan, Imran Hafeez, 2022. “Effect of Temperature & Moisture Exposure on Binder-Aggregate Bond Strength”. 2nd International Conference on advances in Civil and Env. Engg (ICACEE-2023) At University of Engg. & Tech. Taxila, Pakistan.22-23 February 2023.
  9. Amir Nawaz Khan, Imran Hafeez, 2022. “Thixotropic behaviour of asphalt binder modified with nano clay”. International Scientific research congress dedicated to the 30th anniversary of Baku Eurasia University.
  10. Moazzam Sattar, Imran Hafeez, 2022. “Effect of Temperature on self-healing of asphalt mixtures” 1ST International conference on advances in civil and environmental engineering (ICACCEE) 2022, Paper ID 195, Department of Civil Engineering, University of Engineering and Technology, Taxila, Pakistan.
  11. Usama zakir, Imran Hafeez, 2022. “Enhancement of self-healing tendency of reclaimed asphalt using additives. 1ST International conference on advances in civil and environmental engineering (ICACCEE) 2022, Department of Civil Engineering, University of Engineering and Technology, Taxila, Pakistan.
  12. Umar Waqas, Imran Hafeez, 2022. “Effect of Organophilic nanoclay on low temperature performance of asphalt binder”. Proceedings of 2nd International Conference on Recent Advance s in Civil Engineering and Disaster Management. Page 152-156, UET, Peshawar, Pakistan.
  13. Shahryar, Imran Hafeez, M. Sohail Jameel. 2021. Laboratory assessment of Rosin modified bitumen on asphalt mixtures”. HODJA AKHMET YASSAWI. 4th International conference on scientific research, ANKRA, TURKEY, 12-13 February 2021.
  14. Fayaz Rashid, Imran Hafeez, 2021. “Analysis of Truck Traffic using Weight-In-Motion (WIM) Data”. Proceedings of the 1st International Conference on Recent Advances in Civil and Earthquake Engineering, 8th October 2021, Peshawar, Pakistan Page 255.
  15. Muhammad Tufail, Jawad Hussain, Hammad Hussain Awan, Imran Hafeez and Naveed Ahmad, 2021. Principle Component Analysis is Significant than Simple Average Technique in the Development of Road Safety Performance Index: Analysis of Rural Roads in Developing Countries. ICTETP 2021: 15. International Conference on Transportation Engineering and Transport Planning, January 14-15, 2021, in Bali, Indonesia.
  16. M Haroon, Imran Hafeez, Shafeeq Ahmad, 2020.  Investigating the Permeability of course and fine asphalt mixtures. 3rd Pak-Turk International Conference on Emerging Technologies in the field of Sciences and Engineering 9-10, June 2020 Organized by Ghulam Ishaq Khan Institute of Engineering Sciences and Technology.
  17. Fatima Ashfaq, Imran Hafeez, Sabahat Hussan, 2020. Developing Non-Linear Relationship Among Factors Affecting the Rutting Susceptibility of Asphalt Mixtures Using Two Parameter Weibull Distribution. 3 rd Pak-Turk International Conference on Emerging Technologies in the field of Sciences and Engineering 9-10, June 2020 Organized by Ghulam Ishaq Khan Institute of Engineering Sciences and Technology.
  18. Rizwan Ahmad, Imran Hafeez. 2020. “Effect of binder modification on its durability”. 19th Annual International conference on Highways and Airport Pavement Engineering, Asphalt Technology, and Infrastructure International Conference, 11-12th March, 2020, Liverpool, UK.
  19. Ahesn Nisar, Bilal Zaidi, Imran Hafeez, Ayyaz Farid. 2020. “Rheological and chemical properties of nano wood ashes in asphalt binder”. 19th Annual International conference on Highways and Airport Pavement Engineering, Asphalt Technology, and Infrastructure International Conference, 11-12th March, 2020, Liverpool, UK.
  20. Imran Hafeez, Fatima Ashfaq, Sabaat Hussain 2018. “Assessing the rutting potential in Reclaimed asphalt pavement using wheel tracker, 17th International conference on “asphalt pavement engineering and infrastructure, 21-22 February, Liverpool John Moorse University, Sensor City, Liverpool, UK.
  21. Ahmad, N., Kamal, M. A., Khan, T. A., Amini, E., Alamar, Q., Jamal, Hafeez, I. 2018. “Skid resistance of asphalt mixtures prepared using different aggregate sources and gradations, 17th International conference on “asphalt pavement engineering and infrastructure, 21-22 February, Liverpool John Moorse University, Sensor City, Liverpool, UK.
  22. Imran Hafeez, Arshad Jamal.2017 “A field and laboratory based analysis for assessing signage retroreflectivity degradation” International Conference on Civil and Environmental Engineering (I2C2E), Research World, 13-14 August, 2017. Paris, France
  23. Kamal M.A. Yousaf Mushtaq, IMRAN HAFEEZ, Naveed Ahmad. 2016. To Evaluate the Effect of Crumb Rubber on Laboratory Rutting Performance of Asphalt Concrete Mixtures. International conference on asphalt pavement engineering and infrastructure, 24-25 February 2016. John Moors University, Liverpool.
  24. Seyed Saleh Yousafi, IMRAN HAFEEZ, Hasan Ozer, Imad Al-Qadi. 2016.” Field and Laboratory Low Temperature Performance of Hot-Poured Crack Sealant in Michigan” Transportation Research Board (TRB),16-6727, 95th annual meeting, Washington D.C.,
  25. KAMAL, M.A., IMRAN HAFEEZ, NAVEED AHMAD, SABAHAT, HUSSAIN. 2015. Influence of modifiers on asphalt binder rheological properties under a temperature sweep test. Proceedings of the LJMU 14th Annual International conference on Asphalt Pavement Engineering and Infrastructure, 11th -12th February, 2015, Liverpool, UK. ISBN 978-0-9571804-6-8.
  26. Waseem M.W., Kamal M.A., HAFEEZ, I. Ullah W. 2012 “ROLLIG PLAN OF ISLAMABAD – LAHORE MOTORWAY (M-2) USING HDM-4”. 2012 LJMU 11th Annual International conference on Asphalt Pavement Engineering and Infrastructure, to be held on 15-16 February 2012, John Moors University, Liverpool Liverpool, UK
  27. IMRAN HAFEEZ, Kamal M. A, Shahab K., 2011. Prediction of permanent strain from resilient modulus for low asphalt content mixes in a Mechanistic-Empirical Model” 10th International Conference For Pavement Engineering & Asphalt Technology, held from 16-17 February, 2011, John Moors University, Liverpool at Liverpool, UK.
  28. HAFEEZ, I., & Kamal, M.A.,” 2010. Road Marking Practices in Pakistan and its Comparison with MUTCD” The First Makassar International Conference on Civil Engineering (MICCE 2010), March 9-10, 2010, pp 887-891, Indonesia. ISBN: 978-602-95227-0-9
  29. Kamal, M.A., Rahat, A.& HAFEEZ, I., 2010. ”Effects of Polymer Modified Bitumen on Rutting with Varying Aggregate Gradations” 2010 LJMU 9th Annual International Conference, held on 17-18 February 2010, Liverpool, UK.
  30. Waseem M.W., HAFEEZ, I. Kamal M.A., 2010. “A comparative study of Empirical and Mechanistic Pavement Design Methodologies Using Kenlayer Software”. 2010 LJMU 9th Annual International Conference, to be held on 17-18 February 2010, Liverpool, UK.
  31. IMRAN HAFEEZ, Kamal M. A, 2009. “A Rheological Comparison Of Hard Grade Binder With Polymer Modified Bitumen Under Aged And Unaged Conditions”, 4th International Conference on “Computational Methods and Experiments on Materials Characterization 2009, 17 - 19 June 2009, The New Forest, UK. Vol. 64, pp105-114, ISSN 1743-3533(online), ISBN: 978-1-84564-189-4.
  32. KAMAL, M.A., IMRAN HAFEEZ, 2008. “Causes of Road Accidents in Pakistan and Their Preventive Measures”, 2008 International conference and Annual meeting of Chinese institute of Transportation, National Kaohsiung, First University of Science and Technology, Taiwan, 4-5 December, 2008.
  33. IMRAN HAFEEZ, Kamal M. A., 2008. “Accidents Black Spots on highways and their low cost remedial measures.” Proceedings of 14th International conference on Urban Transportation and the Environmental in the 21st Century”, 1-3rd September 2008, Malta, pp 691-700.ISBN:978-1-84564-123-4
  34. Kamal M. A, IMRAN HAFEEZ, 2008. “Time Dependant Volumetric Behavior of Flexible Pavement under Heavy Loading & High Temperature” Proceedings of 1st International conference on Transportation Geotechnics, 25-27th august 2008, University of Nottingham, UK, “Advances in Geotechnics” pp523-527.ISBN:978-0-415-47590-7.
  35. KAMRAN, M. K., KAMAL, M.A., IMRAN HAFEEZ & TARIQ RIAZ, 2007. “Performance Grading (PG) of Asphalt for Implementing Superpave Mix Design Method to Resist Rutting” Proceedings of 6th International Conference on Sustainable Aggregate, Pavement Engineering and Asphalt Technology, Liverpool John Moores University, Liverpool, U.K. 21st and 22nd February. 2007.
  36. IMRAN HAFEEZ, Kamal M. A., 2007. “Need to Revitalization Pedestrian Facilities in Urban Traffic System” Proceedings of International Seminar on “Urban Traffic Problems and their solution” Department of Transportation Engineering and Management, UET Lahore14-15 November 2007.
  37. KAMAL, M.A., IMRAN HAFEEZ, KAMRAN M.K., 2006. “Feasibility of Perpetual Pavements in Developing Countries”, International conference on perpetual pavement, September 13-15, 2006, Columbus, Ohio, USA.
  38. Kamal M. A, IMRAN HAFEEZ, “Field and laboratory evaluation of volumetric properties of Asphaltic concrete”, Proceedings of 7th international congress on Civil Engineering, 8-10 May 2006, Iran, pp 126, E1172.ISSN:1735-5540.
  39. KAMRAN, M. K., IMRAN HAFEEZ, 2005. “Strengthening of Subgrade using soil stabilizers”, Proceedings of 6th International Conference on “Ground Improvement Techniques” 18-19 July, Coimba,  Portugal 2005, pp 349-356
  40. KAMRAN, M. K, USMAN GHANI, IMRAN HAFEEZ & NAVEED AHMAD, 2004. “Assessment and repairing techniques for fire damaged concrete structures” Proceedings of 2nd International conference on protection of structures against Hazards, held at Singapore from 1-3 December-2004.
  41. KAMAL, M.A., IMRAN HAFEEZ, KAMRAN M.K., 2004. “Impact of Pedestrian Bridges on Road Safety”, International conference on road safety, 8-9th December 2004, NUST, Rawalpindi.

Research Projects completed with different Organizations

  1. 2019-23: NRPU Project # 7054: “Improvement of Intermolecular bonding of bituminous materials to enhance visco-elastic properties”.
  2. 2017-2019; Feasibility of Plastic Waste to improve the asphalt mixtures properties” Capital Development Authority (CDA), Islamabad.
  3. 2016-18: Consultancy services to C&W, Punjab Province in the development of Research Centre, Lahore.
  4. 2013-14: Combined Research Project “From University of Engg. & Tech., Taxila & Uni. of Engg. & Tech., Lahore in collaboration with the National Highway Authority.
  5. 2012-13: Performance characterization of In-place Re-heat recycled mixtures. Illinois Center for Trans. Engg., University of Illinois at Urbana-Champaign, IL, USA.
  6. 2013: Pavement Design of Sargodha-Makhdoom interchange provincial highway, C&W, Sargodha.
  7.  2010: Investigating the cause behind Sohawa-Chakwal-Mianwali-Talagang Highway, Mianwali, 20Km length.

Grants Taken from HEC

  1. 2019: NRPU Project 7054: Rs. 13.217 millions with project title “Improvement of Intermolecular bonding of bituminous materials to enhance visco-elastic properties”.
  2. 2016: Grant of Rs. 1.820 Million for purchase of Asphalt meter under the project “Upgradation the lab at Taxila Institute of Transportation, University of Engg. & Tech., Taxila under institutional strengthening project”.
  3. 2015: Grant of Rs. 1.95 Million for the purchase of retro reflectometer under the project “Upgradation the lab at Taxila Institute of Transportation, University of Engg. & Tech., Taxila under institutional strengthening project”.
  4. 2014: Grant of Rs. 1.0 Million for the purchase of retro laboratory equipment under the project “Upgradation the lab at Taxila Institute of Transportation, University of Engg. & Tech., Taxila under institutional strengthening project”.
  5. 2008: Grant of Rs. 0.2 Million under the Provision of grants to public sector universities and degree awarding Institutions for Maintenance of Scientific Equipment.

 Administrative/others Experience:

Designation/Title

Date

Director P&D

31 August 2017 to 08-09-2021

Member, Works Committee, UET Taxila

July 2019 to 08-09-2021

Member, Discipline committee

September 2019 to December 2021

Warden, Hostels

June 2013 to 16-08-2018

Member Library Committee

November 2010 to date

Member Liveries Committee

February 2011 to June 2012

Project Director, Building & Works Department, UET, Taxila.

23-03-2008 to 30-09-2008 &

02-03-2010 to 30-10-2010

Member enquiry committee of main building of sub-campus Chakwal at City Campus.

02-03-2010 to November 2010

Chairman, Joint measurement committee of Cafeteria building at UET Taxila Campus

Feb. 2010 to November 2010

Member, Fact Finding Committee of Audit para’s of B& W Deptt. at UET, Taxila,

31-08-2009 to 30-10-2010

Chairman, Auction Committee.

22-07-2008 to 30-09-2008

Member Project Purchase Committee, Up-Gradation of Research Lab. Of Transportation Engg. In CED.

27-02-04 to 28-02-05

&

09-08-05 to 30-05-07

Member Project Purchase Committee, Strength. of Lab.s and Library of Struc. Engg & Trans. Engg. Division.

27-02-2004 to 28-02-2005

Convener, Accreditation Committee of the Civil Engg. Department

06-12-2007 to 31-01-2008

Incharge, Taxila Institute of Transportation Engineering, UET, Taxila.

Since July 2007 to date

Member, Prime Minister Inspection Commission for the inspection of National Highways and other roads constructed by NHA and C&W Department, Government of Sindh.

From March-October 2009

 

 

Working with Pakistan Engineering Council

  1. As Subject Expert on PEC Accreditation Team

Sr. No.

Description

Dates

1

Expert Transportation Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Depart. of Trans. Engg. & Management” Uni. of Engg. & Tech. Lahore, For the Sessions 2004-06.

14 -15December 2009

2

Expert Transportation Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Dept. of Civil Engg.” CECOS University IT & emerging Sciences, Peshawar, For the Sessions 2006

28-29 March 2011

3

Convener/Expert Transportation Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Department of Transportation Engg. & Management” University of Engg. & Technology, Lahore, For the Sessions 2006

29-30 June 2011

4

Convener/Expert Civil Engg. Pak. Engg. Council (PEC) Team For Zero Visit of “Department of Civil Engg.” University of Management and  Technology (UMT), Lahore,

2 -3 July 2014

5

Convener/Expert Civil Engg. Pak. Engg. Council (PEC) Team For Accreditation Visit of “Department of Civil Engg.” National Fertilizer Corporation (NFC), Faisalabad

4th  July 2014

6

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Re-accreditation Visit of “Dept. of Civil Engg.” National Iqra University, Peshawar

12-13h June 2014

7

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Re-accreditation Visit of “Dept. of Civil Engg.” National Iqra University, Peshawar

2-3 October 2015

8

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Re-accreditation Visit of “Dept. of Civil Engg.” Sir Syed University, Karachi

25-26 May, 2016

9

Expert Transportation Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Dept. of Civil Engg.” CECOS University IT & emerging Sciences, Peshawar, For the Sessions 2012

16-17 October 2016

10

Expert Transportation Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Dept. of DTEM.” UET Lahore, Sessions 2012, 13, 14

23-24 August, 2017

11

Expert Transportation Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Dept. of Civil Engg. ”MUET Khairpur, Sessions 2012, 13, 14

3-4 December, 2017

12

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Re-accreditation Visit of “Dept. of Civil Engg.” UET, Peshawar, Jalozai campus

16-17 August, 2019

13

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Re-accreditation Visit of “Dept. of Civil Engg.” Sarhad University, Peshawar

5-6 July, 2019

14

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Dept. of Civil Engg.” BUITEM, Quetta Sessions 15-16

1-3 January, 2020

15

Convener/Expert Civil Engg. Pak. Engg. Council (PEC) Team For Change of Scope UET Peshawar, Banu campus

November 2021

16

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Dept. of Civil Engg .Muslim Youth University, Rawalpindi

4-5 June 2021

17

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Dept. of Transportation Engg & Management, UET LAHORE

17-18 June 2021

18

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Dept. of Transportation Engg, COMSATS Wah, Taxila.

28-29 June 2021

19

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Physical verification of labs visit of “Dept. of Civil Engg .Muslim Youth University, Rawalpindi

September 24-25, 2021

20

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Dept. of Civil Engg.” UET PESHAWAR, Sessions 17-18

7-8 January 2022

21

Convener/Expert Civil Engg. Pak. Engg. Council (PEC) Team For Change of Scope visit of IIUS, Islamabad

14th March 2022

22

Expert Civil Engg. Pak. Engg. Council (PEC) Team For Re-accreditations of “Dept. of Civil Engg.” APCOM Rawalpindi,

31 March-01 April 2022

 

  1. As Subject Expert on PEC Curriculum Review Committee (ECRDC)

Played as leading role in the development course curriculum of “B.E Transportation Engineering” at National Level. Also, co-opted member of ECRDC

  1. As Subject Expert on PEC EPE Committee

 As expert to set/evaluate EPE exams

 

  • Worked as subject specialist in National Testing Service (NTS) in developing the contents of undergraduate/postgraduate/DAE.

 

  • Worked as Specialist in the establishment of Department of Civil Engineering HITEC in 2018-19. (Assignment includes, Curriculum development, laboratories development, and hiring of suitable faculty staff)
  • Subject Specialist for various Selection Boards of Department of Civil Engg. HITEC University in year 2017, 2018 and 2020.

Recent Achievement


1- Developed A Novel Rejuvenator for the improvement of aged asphalt binder in RAP materials and hence its application in Asphalt mixtures.

2-Palyed a key role in the completion of Phase-I of the Project " Improvement of asphalt mix design technology for Pakistan" a joint venture by National Highway Authority of Pakistan and Academia.

3-Developed Methodlogy to optimize aggregate gradation for asphalt mixtures

4- Played a key role (as director planning and development) in the establishment of University of Chakwal, Chakwal Campus, Pakistan.

5-Played a key role in establishment of a unique center of its own kind in Pakistan (Taxila Institute of Transportation Engineering) for Postgraduate studies and research in the field of Transportation Engineering.

 

EXPERIENCE: (24 years )

Teaching & Research Experience:                23 years

Designation Title

Date

Name of Organization, where working or worked

Brief Job Description

From

To

Professor (BS-21)

16.01.

2017

To Date

University of Engineering & Technology, Taxila.

Teaching, Research and other administrative responsibilities

Associate Prof.

(BS-20)

19-03-2013

15-01-2017

University of Engineering & Technology, Taxila.

Teaching, Research and other administrative responsibilities

Assistant Prof.

(BS-19)

21-03-2007

18-03-2013

University of Engineering & Technology, Taxila.

Teaching and Research other responsibilities

 

Assistant Prof.

(BS-18)

27-11-2006

20-03-2007

University of Engineering & Technology, Taxila.

Teaching and Research other responsibilities

 

Assistant Professor

(BS-18)

Contract under Project

09-08-2005

21-11-2006

University of Engineering & Technology, Taxila.

Working on projects key features i.e. Specifications, tendering, procurements & installation of state of the art equipments at Taxila Institute of Transportation Engineering.

 

Lecturer (Visiting)

(BS-17)

22-03-2005

22-07-2005

University of Engineering & Technology, Lahore

Teaching M.Sc course “Traffic Engineering” at CED, UET Lahore

 

Teaching Research Associate

(BPS-17)

27-02-2004

 

28-02-2005

University of Engineering & Technology, Taxila

Worked on projects key features i.e. Specifications, tendering, procurements & installation of state of the art equipments at Taxila Institute of Transportation Engineering.

 

FIELD EXPERIENCE  FULL TIME/PART TIME/CONSULTANCY

2000 TO 2004:               Project Engineer with M/S Khalid Rauf & Co. (Pvt) Ltd., Lahore,

2004 TO 2006               Work on consultancy basis with M/S Khalid Rauf & Co. (Pvt) Ltd., Lahore

Completed Projects in the field;     

  • Development of Multi-Garden Housing Scheme in Sector B-17/Extended Area, Islamabad, Phase-I, for Block-A,B &C. Worked as Advisor to Consultant
  • Construction of I.J. Principal Road from G.T. Road to PirWadhai Intersection (Dual-Carriageway) Phase –I, Islamabad”, Capital Development Authority, Islamabad, Pakistan..
  • Construction & Rehabilitation of south bound (N-5) carriageway from Taxila Monument to Turnol Phattak Km. 1555 to 1565. National Highway Authority, Pakistan.
  • Rehabilitation of National Highways Maintenance Projects from Km. 1410 to 1500.N/B & S/B. National Highway Authority, Pakistan
  • Carpeting/ Re-carpeting of Internal Roads in Islamabad, 105 KM Length.
        • FMR-19101 (Chak No. 19JB to Chak No.20 JB,) Distt: FAISALABAD, 10 KM Length, with M/s Indus Consultants, Japanese Assisted Rural Road Construction Project (S.P.M.U)
  • FMR -L.F.L 13301-IV, Kasur Khem Karan Road via Bhadian, Distt: Kasur, 3.3KM Length. with M/s NESPAK Consultants, Japanese Assisted Rural Road Construction Project (S.P.M.U)
  • Construction of FMR‘s in Pakpattan Division, 16602-II/P3, 16606, 18KM Length, with M/s NESPAK Consultants (ADB-Projects)

Laboratory Experimentation (18 Years experience)

  • Crack Sealants grading and characterizations using DSR, BBR, RV, Cohesion and Adhesion test.
  • Asphalt Binder Grading and Characterization using Superpave testing on binders (Rheological parameters, frequency sweep, master curve, creep compliance, aging on RTFO)
  • Conventional testing on asphalt cement (penetration, ductility, softening point, specific gravity, flash and fire point, spot test, binder recovery, etc)
  • Superpave and Marshall Methods of mix design and relevant binders and asphalt mix testing, compaction etc.
  • Performance testing on asphalt mixes (wheel tracker, uniaxial & diametric testing on UTM-5P, dynamic modulus of mixes on NU-14, Fracture Testing, IDT Creep, four point beam fatigue testing, accelerating polishing machine, British pendulum testing, Benkelman beam, centrifuge extraction, etc)
  • Characterization of soil (sieve analysis, hydrometer, soil classification, density, triaxial testing, unconfined, confined, more circles, CBR, Mr., SPT, DCP, Pile load test, Vane shear test etc)
  • Field testing (cores extraction, thickness measurement, FWD Modulus Back-calculations, extraction, profilograph, surface rut measurements, PCI, etc).

Pavement Design & Vetting Experience

Involved in vetting of pavement designs and Job Mix Formula’s of HMA in numbers of projects throughout Pakistan, some are listed below.

Pavement Design:

  1. Design of Flexible Pavement of “Restoration and Improvement of Canal Sections, Structures and Road along Warsak Lift Canal Length = 57,700ft” Warsak Canal Division, Department of Irrigation, K.P.K.
  2. Design of Rigid Pavement at Railway Goods Yards, Lahore, 1.5Km, Pakistan Railway.
  3. Flexible Pavement Design of Dualization of Makhdoom Interchange (M-2) to Sargodha Length = 39.2Km (Pavement Design). Provincial Higway Circle, Sargodha.

Vetting of Pavement Designs

  1. Vetting of pavement designs Bahria Housing Scheme, Phase-I, II, & Extesions, Askari villas, Safari villas,   Rawalpindi, Pakistan.
  2. Vetting of pavement designs Bahria Housing Scheme, Askari villas.
  3. Vetting of pavements design Gulshan –e-Fatima Housing Scheme, Rawalpindi, Pakistan.
  4. Pavement Design of Palandri Expressway, Azad Kashmir,32 Km. Pakistan.

Asphalt Concrete Mix Design for Highways

Sr. No.

Highway Project

Length (Km)

1

Project Improvement /Carpeting of Bather to Fateh Jang i/c Link To Bather Village (G-I,G-II& G-III)

29.3

2

Development of “ Multi Gardens” Housing Scheme in Sector B-17/Extended Area, Islamabad,

31.00

3

Construction, Improvement & Black Topping of Gurmanda To Pando Road

 

4

Construction, Improvement & Black Topping of Sharda-Kel Road, Distt. Nelum.

19.00

5

Construction of Traffic Improvement & Rehabilitation of Khaban-e-Sirsyed Road From IJ-Principal Road to Lai Bridge at Dhoke Dalal & Rehabilitation of DHoke Khaba Road Rawalpindi.

 

6

Development works in Northern Strip Sector”E-11”, Islamabad

3.0 Km

7

Construction, Rehabilitation of road from Hazro to Shamsabad More Kalu

2.58 km

8

Job Mix Formula of asphalt base course (Class-A), As per NHA Specifications.

 

9

Maintenance and Repair of roads at UET, Taxila

3.0 Km

10

Construction of Internal City Roads at district head quarter, Pallandri.

7.0 Km

 

A continuous experience of developing/design the Asphalt Mix Job Formula's FOR various road projects in Pakistan since 2011, 

 

Consultancy and Advisory Services at the Plateform of Department of Civil Engineering, UET, Taxila

1- Pavement Design,  evaluations, and third party validation/vetting of road infrastructure etc.

2- Pavement Material characterization, modification, material modeling and feaibilithy of materials for pavement construction.

3- Project estimations, preparing of Bill of Quantities, variation orders, escalations, Time extension cases, Bidding, tendering as PPRA rules etc.

Member, Pakistan Engineering Council (Civil/20302)

Member, Pakistan Engineering Congress (Civil/3486)

Member, ASCE [Membership#000011949079]

B.Sc

       Civil Engineering Materials (Taught from 2007 to 2011)

       Foundation Engineering (Taught from 2006 to 2010)

      Transportation Engineering-I (Since 2014 onwards to Spring Semester)

      Transportation Engineering-II (Since 2013 onwards to Autumn Semester)

M.Sc

       Transportation Engineering (Taught from 2006 to 2012)

       Traffic Management Techniques (Taught from 2006 to 2012)

        Pavement Structure, materials and design (Since 2013 onwards to Fall Semester)

        Traffic Safety (Since 2014 onwards to Spring Semester)

Ph.D

       Advance Pavement Materials (Since 2013 onwards to Fall Semester)

      Asphalt Mixture Design and Construction (Since 2014 onwards to Spring Semester)

Designation Title

Date

From

To

Professor (BS-21)

16.01.2017

To Date

Associate Professor (BS-20)

19-03-2013

15-01-2017

Assistant Professor (BS-19)

21-03-2007

18-03-2013

Assistant Professor (BS-18)

27-11-2006

20-03-2007

Assistant Professor (BS-18)

Contract under Project

09-08-2005

21-11-2006

Lecturer (Visiting) (BS-17)

22-03-2005

22-07-2005

Teaching Research Associate (BPS-17)

27-02-2004

28-02-2005

PROFESSIONAL AFFILIATION:

Professor (BPS-21), Department of Civil Engineering, University of Engineering and Technolgy, Taxila, Pakistan.

2024                3rd International Conference on advances in Civil and Environmental Engineering (ICACEE)-2024, at UET Taxila, Technical Advisor of First and third 

                       technical session.

2023                2nd International Conference on advances in Civil and Environmental Engineering (ICACEE)-2023, at UET Taxila, Technical Advisor of First technical

                       session.

2022                1st International Conference on Civil and Environmental Engineering, at UET Taxila

2018                17th International Conference on “Asphalt Pavement Engineering and Infrastructure” Liverpool John Moores University (LJMU), Liverpool, UK, 21-

                         22nd February 2018.

2014                International Seminar on “Improvement of Asphalt Mix Design for Pakistan”, In collaboration with National Highway Authority, Pakistan, NUST, UET

                       Taxila & UET Lahore, on 14-15 May, 2014 at NHA auditorium, Islamabad.

2013                92nd Annual TRB Conference, 12-16 January, 2013, Washington, DC., USA.

2012                53rd Annual Illinois bituminous paving conference, University of Illinois at Urbana-Champaign, IL, USA.

2011                10th International Conference on “Sustainable Construction Materials and Technology in Asphalt Pavement Engineering and Highways

                        Maintenance” Liverpool John Moores University (LJMU), Liverpool, UK, 16-17th February 2011.

2010                9th International Conference on “Sustainable Construction Materials and Technology in Asphalt Pavement Engineering and Highways

                        Maintenance” Liverpool John Moores University (LJMU), Liverpool, UK, 17-18th February 2010.

2008                1st International conference on “Transportation Geotechnics”, Nottingham, UK, 25-27th august 2008.

 

 

CONFERENCES/WORKSHOPS/SEMINAR/TRAINING COURSES AND CONFERENCES ATTENDED/PARTICIPATED:

2024                3rd International Conference on advances in Civil and Environmental Engineering (ICACEE)-2024, at UET Taxila, Technical Advisor of First and third technical session.

2023                Attended Webinar on “How to effectively use Researcher Academy and Elsevier Journal Finder” on December 12, By Dr. Vinita Saroha, Customer

                       Consultant.

2023                Attended Webinar on “ASTM COMPASS Training-2” on November 28, By Murat Iren, Director, Business Development (EMEA) ASTM International.

2023                Attended Webinar on “How to effectively use Mendeley in Research Cycle” on November 21, By Dr. Vinita Saroha, Customer Consultant.

2023                Attended Webinar on “Navigating the pathways of publishing in High-quality journals” on November 8, By Dr. Vinita Saroha, Customer Consultant.

2023                Attended Webinar on “Ethics Spotlight: Authorship, Conflicts of Interest & AI” organized by Taylor and Francis, Group on October 12, By Dr.

                        Vinita Saroha, Customer Consultant.

2023                2nd International Conference on advances in Civil and Environmental Engineering (ICACEE)-2023, at UET Taxila, Technical Advisor of First technical

                        session.

2022                1st International Conference on advances in Civil and Environmental Engineering (ICACEE)-2022, at UET Taxila.

2019                Participation as key member of expert group of National Highways in CHINA at Research Institute of Highway (RIOH), Beijing, 18-22 February 2019.

2018                Training workshop on “Project Preparation” by Community of Evaluators Pakistan (COE) held on 19-20 July 2018, Islamabad

2018                Training Course on “Public Procurement and PPRA Rules” at PPMI, From 07-10 May , 2018

2018                17th International Conference on “Asphalt Pavement Engineering and Infrastructure” Liverpool John Moores University (LJMU), Liverpool, UK, 21-

                        22nd February 2018.

2017                Three day Refresher course for material engineers/material specialist on NHA construction projects, organized in collaboration with HRTC, April 24-28, 2017.

2015                3-day training/workshop on “traffic engineering and highway safety” organized by urban policy unit, Khyber Pakhton Khaw, Peshawar,

2015                Workshop on Outcome Based Education System by Prof. Dr. Ir. Hean Teik Chuah, the Past-President FEIAP, Sep 16, 2015 (0900-1600 Hrs), PEC HQ,

                       Islam

2015                Attend one-day workshop on emergency traffic management techniques at Peshawar held on 2nd June 2015.

2014                International Seminar on “Improvement of Asphalt Mix Design for Pakistan”, In collaboration with National Highway Authority, Pakistan, NUST, UET

                       Taxila & UET Lahore, on 14-15 May, 2014 at NHA auditorium, Islamabad.

2013                92nd Annual TRB Conference, 12-16 January, 2013, Washington, DC., USA.

2012                53rd Annual Illinois bituminous paving conference, University of Illinois at Urbana-Champaign, IL, USA.

2011                10th International Conference on “Sustainable Construction Materials and Technology in Asphalt Pavement Engineering and Highways

                        Maintenance” Liverpool John Moores University (LJMU), Liverpool, UK, 16-17th February 2011.

2011                Building effective coordination between R&D and Industry for enhancing innovative, competitiveness and productivity of indigenous technology, By

                       Pakistan Scientific and technological information centre, Islamabad in collaboration with Institute of Research Promotion, Lahore on 4th July 2011.

2010                9th International Conference on “Sustainable Construction Materials and Technology in Asphalt Pavement Engineering and Highways

                        Maintenance” Liverpool John Moores University (LJMU), Liverpool, UK, 17-18th February 2010.

2008                1st International conference on “Transportation Geotechnics”, Nottingham, UK, 25-27th august 2008.

2008                2nd International workshop “Highway Engg.”, Islamabad, Pakistan, 5-6 March 2008.

2007                International Seminar on “Urban Traffic Problems and their solution” Lahore, Pakistan, 14-15 November 2007

2007                Short Course on “Pavement Design” CEC-1, In collaboration with UET-Taxila and PEC, Islamabad, Pakistan, 19-20 March 2007.

2006                Short Training on NU-14 Universal Servo-Pneumatic Base System to Perform Dynamic Modulus, Triaxial Testing of Unbound Materials & 4 Point

                        Bending Fatigue from Cooper Technology, UK, Held at TITE, CED, UET, Taxila.

2005                Workshop on “Ecological design: Cities, Landscape and Transport” Islamabad, Pakistan, 23-24 September 2005

2004                International Seminar on “Road Safety” Rawalpindi, Pakistan, 8-9 December 2004

2004                Executive Course on ISO9000-2000“Total Quality Management (TQM)” Organized by UET Taxila, Pakistan, 23-24 July 2004

2001                Short Course on “Project Scheduling and Planning” Lahore, Pakistan, 25 July-27 August 2001

 LIST OF PH.D RESEARCH THESIS SUPERVISED

  1.  Abdul Waheed, 2014-UET/PhD-CE-65 “Evaluating the efficacy of compacted clay liner for arid/semi-arid region” Degree Completion Date:31st December 2018.
  2. Ghulam Yaseen, 2015-UET/PhD-CE-93 “Performance Evaluation of Aged Asphalt Pavement Binder with Modifiers”. Degree Completion Date: 24th February 2021.
  3. Mahmood Ahmad, 2016-UET/PhD-CE-12. “Effect of air voids distribution on permeability of asphalt mixtures”. Degree Completion Date: 28th March 2022
  4.  Farhan Qadir, 2K19-UET/PhD-CE-49. " Effect of Organophillic Nano clay (hydrophobic) on asphalt binder properties and perfromance". In Final phase of completion. 

 

LIST OF M.Sc RESEARCH THESIS SUPERVISED

S.N.

Year

Author Names

Thesis Title

1

2008

Rafaqat Ali.

Assessment of Resistance to Rutting of Asphaltic Material by Simulating the Insite Traffic and Environmental Conditions

2

2009

Gohar Ali.

Comparison of Permanent Deformation Models for Low grade Bitumen (PB 40-50) with Polymer Modified Bitumen.

3

2010

Mahir J.N. Msawil.   2K7-MSC-TRAN-10

Study the Behavior of different HMA Mixtures under Cyclic Loading

4

2010

Malik Imran Nazeer

Time and Temperature Response of Bituminous Materials Under Cyclic Loading

5

2010

Barkatullah

2K7F-MSC-TRAN-08

Fatigue behavior of conventional high penetration grade bituminous mix with sand as filler

6

2010

Sardar Bilal   2K7F-MSC-TRAN-03 

Fatigue behavior of conventional high penetration grade bituminous mix with cement as filler

7

2011

Ayaz Aziz                2K7F-MSC-TRAN-09

Investigating the Effects of Maximum Size of Aggregate on Rutting Potential of SMA

8

2011

Nadia Bashir               2K8-MSC-TRAN-01

Characterization of Hot Mix Asphalt Using Dynamic Modulus

9

2012

Abdullah Khalid            09-MSc-TRANS-09

To Investigate the Traffic Flow Issues on Jinnah Avenue, Islamabad and to Suggest their Remedial Measures

10

2012

Mian Irfan Ahmad 09-MSc-TRANS-04

An Experimental Study on Linear Visco Elastic Behavior of Asphalt Binders under Creep Test.

11

2013

Usman Nazar                09-MSc-TRANS-12

Analyses of growing traffic problems at Jail Road, Lahore and to propose solutions minimizing delays

12

2013

Kashif Riaz              2k11-FT-MSc-Trans-04

Influence of binder rheological characteristics on its creep behavior

13

2014

Imtiaz Ahmad

Influence of Conventional Modifiers on Stiffness Behavior of Weak Sub-grade soil.

14

2015

Gulam Yaseen           2K12-PT-MSC-TRAN-13

A Comparison of Grain Shape Characteristics for Different Sources of Aggregates in Pakistan through digital image processing approach.

15

2015

Muhammad Faisal Junaid 2k12-FT-MSc-Trans-06

Influence of Type of Crusher on Aggregate Performance Characteristics

16

2015

Abdul Rahim Khan

2K13-FT-MSC-TRAN-10

Investigating the creep response of asphalt mixtures under waveform loading

17

2015

Raza Mahmood         2K13-FT-MSC-TRAN-01    

Characteristics of fatigue behavior of asphalt mixture under cyclic loading

18

2016

Mateen Rana Kazmi

2K12-MSc-PT-Trans-01

Analysis of Vehicular Traffic Data on the National Highway in Pakistan and Propose Useful Input Parameters for Mechanistic Empirical Pavement Design Guide (MEPDG) Software

19

2016

Rajesh Kumar

2K12-PT-MSC-TRAN-03

Pavement response prediction of Kashmir Highway using laboratory based testing and mechanistic-empirical approach.

20

2016

Ahsen Javeed Qureshi               2k11-MSc-PT-Trans-14

Experimental Study of Tracking Resistance of various Crack Sealants using MSCR Test

21

2016

Ali Shan

2K14-FT-MSC-TRAN-02

Accessing the rutting potential of asphalt mixture using neural network technique.

22

2016

Arshad Jamal

2k14-FT-MSC-TRAN-01

An Instrumental Based Study to Assess Current Practices of Signage Reflection in Pakistan

23

2016

Hammad Ahmad

Statistical modeling of fine-grained soils for geotechnical efficacy.

24

2018

Muhammad Usman Rafique                          (2K14-MS-PT-TRAN-04)

Laboratory Investigation of Reclaimed Asphalt Pavement modified with sulfur

25

2018

Muhammad Shoaib (2K13-MS-PT-TRAN-08)

Comparative Study of the Effect of Sulfur on the Rutting Potential of Reclaimed Asphalt Pavement (RAP)

26

2018

Tahir Mehmood (2K14-MS-PT-TRANS-06)

Effect of modification on reclaimed asphalt pavement binder’s fatigue properties. (Focus: BBR, DTT, RTFO, PAV)

27

2018

Jamal   Ahmed                              (2K16-FT-MSC-TRAN-03)

Improvement of Intermolecular bonding of bituminous materials to enhance visco-elastic properties.

28

2019

Safeer Haider

2K17-FT-MSC-TRAN-06

To study adhesion properties of modified asphalt mixtures

29

2019

M. Farman

2K15-PT-MS-TR-06

To study the permeability of asphalt mixtures using different standards

30

2019

 M. Tauseef

2K16-PT-MS-TR-05

To Ascertain the feasibility of different crush quarries for asphalt mixtures in Pakistan

31

2020

Akhlaq Aman

2K17-FT-MS-TR-08

Influence of Eaton Reagent on asphalt binder

32

2020

Gohar Alam

2K17-FT-MS-TR-03

Assessing the aging tendency of asphalt binder using a thermal cycler

33

2020

Rafi Ullah

2K17-FT-MS-TR-04

To improve the high temperature performance of asphalt mixture by using different modifiers

34

2020

Fatima Ashfaque

2k17-MS-PT-TRAN-01

Modeling the Rutting Behavior of Asphalt Mixtures Using Statistical Probability Technique

35

2020

Nawazish Ali

2K17-PT-MS-TR-17

Multi Component Phase Evaluation of Nano Composite Asphalt Binder

36

2020

Muhammad Haroon

2K18-FT-MS-TRANS-12

To study the Permeability of course and fine aggregate of different mixes

37

2020

Muhammad Rizwan

2K17-PT-MSc-Trans-19

Effect of Binder Modification on Its Durability

38

2021

Sharyar Milano                2K18-FT-MSc-Trans-10

Effect of Rosin modified binder on asphalt mixtures performance

39

2021

Fayaz Rashid                    2K19-PT-MSc-Trans-05

Analysis and Determination of Axle Load Spectra and Traffic Input for Pavement Design

40

2022

Usama Zakir               2K18-PT-MSc-Trans-16

Enhancement of self-healing tendency of reclaimed asphalt using additives

41

2022

Moazzam Sattar            2k19-msc-trn-24

To study self-healing of asphalt mixtures by using microwave induction method

42

2022

Nadeem Khan               2K19-MSc-TRANS-43

Moisture damage assessment of asphalt mixture using Eaton’s Reagent

43

2022

Anam Riaz

2019-MSc-TRANS-06

Characterizing the Bituminous Material by Using Graphical Techniques

44

2022

Awais Qarni                   2K19-MSC-TRANS-17

Characterization of nano clay modified asphalt cement

 

45

2023

Adnan Khan

2K18-MSC-TRANS-24

Effect of temperature & moisture exposure time on binder-aggregate bond strength

46

2023

M. Sarmad Kazmi    2K18-MSC-TRANS-13

An Experimental Investigation on Partial Replacement of Bitumen Using Waste Engine Oil & Crumb Rubber

47

2023

Ammar Ahmad

 2k18-MSc-TRANS-01

Effect of Nano-clay Modified Asphalt Binder on Mixing and Compaction Temperatures of Asphalt Mixture

48

2023

Muhammad Maad Raza

 2k18-FT-MSc-TRANS-2

Effect of stress levels and temperature on creep compliance of asphalt binders.

49

2023

Amir Nawaz Khan  2K19-MSc-TRANS-35

Thixotropic behavior of asphalt binder modified with nano clay

50

2023

Shoaib Mujtaba         2k18-FT-MScTRANS-11

Effect of stress levels and temperature on stress recovery of asphalt binders.

51

2023

Umar Waqas                 2K19-MSc-TRANS-12

To study the Effect of Organophilic Nano-clay on Creep Stiffness of Asphalt Binder at Low Temperatures

52

2023

Ahmad Afnan Gandpur            2K20-MSc-TRANS-11

Effect of Organophilic nanoclay modified binder on high temperature performance of asphalt mixture

53

2023

Muhammad Fanoos Ahmed

2k20-Msc-Trans-16

Moisture susceptibility of organophilic nanoclay modified asphalt mixture

54

2023

Safia kousar

2K20-MS-Trans-14

Effect of shear rate on shear thinning behavior of asphalt binder modified with organophilic clay

55

2024

Syed Shabih ul Hassan

2K19-PT-MSc-TRANS-1

Effect of Petrography of aggregate on rutting behavior of asphalt mixture

56

2024

Muhammad Usama

2K19-PT-MSc-TRANS-3

Performance evaluation of plastic road

57

2024

Abu Bakar Bin Arif

2K22-MSc-TRANS-22

Identification and mitigation of traffic flow capacity problem in single gated community.

WORKSHOPS/SEMINAR/TRAINING COURSES AND CONFERENCES ATTENDED:

2023                Attended Webinar on “How to effectively use Researcher Academy and Elsevier Journal Finder” on December 12, By Dr. Vinita Saroha, Customer Consultant.

2023                Attended Webinar on “ASTM COMPASS Training-2” on November 28, By Murat Iren, Director, Business Development (EMEA) ASTM International.

2023                Attended Webinar on “How to effectively use Mendeley in Research Cycle” on November 21, By Dr. Vinita Saroha, Customer Consultant.

2023                Attended Webinar on “Navigating the pathways of publishing in High-quality journals” on November 8, By Dr. Vinita Saroha, Customer Consultant.

2023                Attended Webinar on “Ethics Spotlight: Authorship, Conflicts of Interest & AI” organized by Taylor and Francis, Group on October 12, By Dr.

                        Vinita Saroha, Customer Consultant.

2018                Training workshop on “Project Preparation” by Community of Evaluators Pakistan (COE) held on 19-20 July 2018, Islamabad

2018                Training Course on “Public Procurement and PPRA Rules” at PPMI, From 07-10 May , 2018

2017                Three day Refresher course for material engineers/material specialist on NHA construction projects, organized in collaboration with HRTC, April 24-28, 

2015    Keynote speaker and source person on 3-day training/workshop on “traffic engineering and highway safety” organized by urban policy unit, Khyber Pakhton Khaw, Peshawar,

2015    Workshop on Outcome Based Education System by Prof. Dr. Ir. Hean Teik Chuah, the Past-President FEIAP, Sep 16, 2015 (0900-1600 Hrs), PEC HQ, Islam

2015    Attend and present lecture on emergency traffic management techniques, in a one-day workshop at Peshawar held on 2nd June 2015.

2014    International Seminar on “Improvement of Asphalt Mix Design for Pakistan”, In collaboration with National Highway Authority, Pakistan, NUST, UET Taxila & UET Lahore, on            14-15 May, 2014 at NHA auditorium, Islamabad.

2013    92nd Annual TRB Conference, 12-16 January, 2013, Washington, DC., USA.

2012    53rd Annual Illinois bituminous paving conference, University of Illinois at Urbana-Champaign, IL, USA.

2011    10th International Conference on “Sustainable Construction Materials and Technology in Asphalt Pavement Engineering and Highways Maintenance” Liverpool John              Moores University (LJMU), Liverpool, UK, 16-17th February 2011.

2011    Building effective coordination between R&D and Industry for enhancing innovative, competitiveness and productivity of indigenous technology, By Pakistan Scientific and                technological information centre, Islamabad in collaboration with Institute of Research Promotion, Lahore on 4th July 2011.

2010    9th International Conference on “Sustainable Construction Materials and Technology in Asphalt Pavement Engineering and Highways Maintenance” Liverpool John                Moores University (LJMU), Liverpool, UK, 17-18th February 2010.

2008    1st International conference on “Transportation Geotechnics”, Nottingham, UK, 25-27th august 2008.

2008    2nd International workshop “Highway Engg.”, Islamabad, Pakistan, 5-6 March 2008.

2007    International Seminar on “Urban Traffic Problems and their solution” Lahore, Pakistan, 14-15 November 2007

2007    Short Course on “Pavement Design” CEC-1, In collaboration with UET-Taxila and PEC, Islamabad, Pakistan, 19-20 March 2007.

2006    Short Training on NU-14 Universal Servo-Pneumatic Base System to Perform Dynamic Modulus, Triaxial Testing of Unbound Materials & 4 Point Bending Fatigue from                      Cooper Technology, UK, Held at TITE, CED, UET, Taxila.

2005    Workshop on “Ecological design: Cities, Landscape and Transport” Islamabad, Pakistan, 23-24 September 2005

2004    International Seminar on “Road Safety” Rawalpindi, Pakistan, 8-9 December 2004

2004    Executive Course on ISO9000-2000“Total Quality Management (TQM)” Organized by UET Taxila, Pakistan, 23-24 July 2004

2001    Short Course on “Project Scheduling and Planning” Lahore, Pakistan, 25 July-27 August 2001

PhD students = 05

M.Sc = 06

1- Highway Research and Training Centre Research Group

Phase I Completed and report published: "Improvement of asphalt mix design technolgy for Pakistan" Report Published.

Phase II in it Initial Planning stage in collaboration with China.

2- Taxila Institute of Transportation Engineering Research group

Complete several industrial based projects/deliverables