List View
One Page View
Name Dr. Muhammad Jawad
Designation Lab Engineer
Department Industrial Engineering (Taxila)
Highest Qualification PhD Industrial and Manufacturing Engineering
Phone No 051-9047828
Cell No 0332-4705654
Fax No
Email [email protected]

Doctor of Philosophy (Ph.D.) in Industrial Engineering (2023)

University Of Engineering And Technology, Taxila

Masters in Industrial and Manufacturing Engineering (2017)

University Of Engineering And Technology, Taxila

Bachelors in Industrial and Manufacturing Engineering  (2012)

University Of Engineering And Technology, Lahore


  1. To investigate the effect of preheating temperature on heat affected zone, quality of weld and weld strength in TIG welding.
  2. Optimization of process parameters in Gas Tungsten Arc welding process by using Response Surface methodology.
  3. Empirical investigation of Orthopedic Drilling

Research Interests

Manufacturing Processes, welding, CNC machining, Casting, CAD/CAM, 3D printing, Advanced manufacturing technology. 

Journal Publications

1. Jawad, M., Jahanzaib, M., Ali, M. A., Sajid, M., & Hussain, S. (2024). Evaluation of Residual Stresses and Distortion of Ti-5Al-2.5 Sn and SS 304 Gas Tungsten Arc Welded Joints under Hybrid Thermal Tensioning Technique: Transient Thermal Tensioning and Trailing Intensive Cooling. Journal of Materials Engineering and Performance, 1-13. (I.F 2.23)

 2. Jawad, M., Jahanzaib, M., Ali, M.A. et al. Improvement in mechanical and microstructural properties of novel TA7/Nb/Cu/SS304 composite joints by reducing intermetallic compounds. Int J Adv Manuf Technol (2023). (Impact Factor: 3.4) 

3. Ahmed, T., Jahanzaib, M., Ali, M. A., Raza, M. H., Jawad, M., & Zahoor, S. (2023). Safety climate in Pakistani universities’ laboratories: An assessment of individual factors. International journal of occupational safety and ergonomics, (2023), 1-20. (Impact Factor: 2.665)

4. Jawad, M., Ali, A., Ishfaq, K., Jahanzaib, M., & Sajid, M. (2023). Performance Evaluation of 70-30 Cu-Ni Filler Metal for Improving Dissimilar Al2024-SS304 Joints’ Efficiency: A Mechanical and Microstructural Investigation. Journal of Materials Engineering and Performance, 1-16. (Impact Factor: 2.3) 

5. Sajjad, A., Ahmad, W., Hussain, S., Chuddher, B. A., Sajid, M., Jahanjaib, M., ... & Jawad, M. (2023). Assessment by Lean Modified Manufacturing Maturity Model for Industry 4.0: A Case Study of Pakistan's Manufacturing Sector. IEEE Transactions on Engineering Management.  (Impact Factor: 8.702) 

6. Hanif, M.W., Wasim, A., Sajid, M., Hussain, S., Jawad, M. and Jahanzaib, M. "Evaluation of microstructure and mechanical properties of squeeze overcast Al7075− Cu composite joints." China Foundry (2022): 1-11. (Impact Factor: 1.215) 

7. Jawad, Muhammad, Mirza Jahanzaib, and Muhammad Ilyas. "Evaluation of welded joints of dissimilar titanium alloy Ti-5Al-2.5 Sn and stainless-steel 304 at different multi-interlayer modes." Materials Research Express 9.10 (2022): 106501. (Impact Factor: 2.025)

8. Javid, H., Jahanzaib, M., Jawad, M., Ali, M. A., Farooq, M. U., Pruncu, C. I., & Hussain, S. (2021). Parametric analysis of turning HSLA steel under minimum quantity lubrication (MQL) and nanofluids-based minimum quantity lubrication (NF-MQL): a concept of one-step sustainable machining. The International Journal of Advanced Manufacturing Technology, 1-20. (Impact Factor: 3.32)

9. Jawad, M., Jahanzaib, M., Ali, M. A., Farooq, M. U., Mufti, N. A., Pruncu, C. I., ... & Wasim, A. (2021). Revealing the microstructure and mechanical attributes of pre-heated conditions for gas tungsten arc welded AISI 1045 steel joints. International Journal of Pressure Vessels and Piping, 104440. (Impact Factor: 2.230)

10. Kashif Ishfaq , Naveed Ahmad, Muhammad Jawad, Muhammad Asad Ali and Abdulrahman M. Al-Ahmari, "Evaluating Material’s Interaction in Wire Electrical Discharge Machining of Stainless Steel (304) for Simultaneous Optimization of Conflicting Responses". Materials, 2019. 12(12): p. 1940. (Impact Factor: 3.623)

11. Ali, Muhammad Asad, Kashif Ishfaq, and Muhammad Jawad. "Evaluation of surface quality and mechanical properties of squeeze casted AA2026 aluminum alloy using response surface methodology." The International Journal of Advanced Manufacturing Technology (2019): 1-14. (Impact Factor: 3.32)

12. Ishfaq, Kashif, Nadeem A. Mufti, Muhammad Jawad, Muhammad Sajid, and Mirza Jahanzaib. "Analysis of the Effect of Wire Electric Dischage Machining Process Parameters for the Formation of High Speed Steel Form Tool". Advances in Science and Technology Research Journal 12 no. 1 (2018): 89-98 (Y-Catagory)

13. Sarfraz, Muhammad Hassan, and Muhammad Jawad Mirza Jahanzaib. "MULTI-RESPONSE OPTIMISATION OF PROCESS VARIABLES IN SQUEEZE CASTING OF Al 6063-SiC COMPOSITE." APPLIED SCIENCES 15.2 (2018). (X-category).

Conference Publications

1. A. Ali, M. Jawad, M. Jahanzaib, Evaluation of microstructure and mechanical behavior of Aluminum 2024 and Stainless steel 304 GTAW joints, MATEC Web Conf., 381, 02007 (2023)

2. Khan, U., Ahmad, W., Sajjad, A., & Jawad, M. (2023). Preliminary Maturity Level Assessment of Industry 4.0 in the Context of Pakistani Industries. Engineering Proceedings45(1), 29.

3. Waseem, M., Hussain, S., Hanif, M. W., & Jawad, M. (2023). Investigating the Ability of Process Parameters to Reduce Defects during the Drilling of Carbon-Fiber-Reinforced Plastic (CFRP) and Aluminum Stack. Engineering Proceedings45(1), 53.


5. Asad Ali, Mirza Jahanzaib, Muhammad Jawad, and Amar ul Hassan. "Finite Element Modeling of Residual Stress and Distortion in Dissimilar TIG Welded Joints of Aluminum 2024 and Stainless Steel 304" Conference Proceeding 5th Pak-Turk International Conference on Emerging Technologies in the field of Sciences and Engineering, (2022): p 23-30. 

6. Muhammad Jawad, Hassan Javid and Mirza Jahanzaib "Multiple response optimization of process parameters during machining of High Strength Low Alloy Steel using Taguchi based Grey Relational Analysis'' Proceesings of International conference on mechanical engineering, (2022): p 558-565.

7. M Hassan Shfique, Mirza Jahanzaib and Muhammad Jawad "Integrated Management System (Case Study): Reviewing the Manufacturing Industry at Technology Readiness Index'' Proceesings of International conference on mechanical engineering, (2022): p 566-575

  1. To investigate the effect of preheating temperature on heat affected zone, quality of weld and weld strength in TIG welding
  2. Mold design for Shoe Sole
  3. Optimization WEDM process parameters for making HSS form tool


  1. Member of BSc results secruitny committee/team
  2. Department focal person for Social Entrepreneurship
  3. Member of Analysis committee for implementation of the Outcome-based education system in IED
  4. Department focal person for Alumni IED
  1. Lab Incharge machine tool and machining lab
  2. Developed machine tool and machining lab in IED UET Taxila



Currently working as “Lab Engineer” at University of Engineering and Technology Taxila, Pakistan (May 2014-to date)

Major responsibilities are:

  • Lab In-charge of Machine tool and Machining Lab
  • To ensure the functionality of all lab equipment and machines
  • Conducting labs of Engineering drawing and graphics, Computer Aided Design and Modelling, Manufacturing processes, Metal forming and cutting analysis, Industrial Automation and Robotics, Engineering Mechanics
  • Preparing Course files according to Outcome-based education (OBE)
  • Supervised one Undergraduate project titled “To investigate the effect of parameters on the weld strength and quality of TIG welding”.
  • Working on several research papers and projects

Worked as “Production Engineer” at “Mecas Engineering (Pvt) Limited” Lahore, Pakistan (July 2012-May 2014)

Major responsibilities were:

  • Manage Daily Production in CNC machining shop
  • Designing the parts by using G and M codes in Power Shop (Cam Software)
  • Hands on experience of CNC machining centers
  • Update all production formats daily
  • Acquiring conditional reports, Delivery Reports regarding trainings, after sales services       and other related issues
  • Implementation of time study and work study in production line
  • Designing of layout for steering pump section
  • Quality check of all steering pumps parts

Member of Pakitan Engineering Council, Islamabad

Teaching following subjects:

  1. Manufacturing  Processes (Th.+LAB)
  2. Metal forming and cutting analysis (Th.+LAB)
  3. Advanced manufacturing systems (LAB)
  4. Engineering Drawing and Graphics (LAB)
  5. Computer-Aided Design and Modelling (Th.+Lab)
  6. Workshop practice (LAB)
  7. Automation and control (LAB)


Lab Engineer

1. Investigate the effects of Gas Tungsten Arc Welding parameters on mechanical properties of 1045 carbon steel 

Sr. No.

Title of workshops/ trainings




Fire fighting techniques and fire prevention management

18-19th June 2014

Saeed Ahmad Awan Centre for improvement or working conditions of environment/ Industrial relations institute, Lahore


Professional practical training of Primavera P6

26-12-2014 to 03-01-2015

Institute of Computer and Business Technology, Lahore


Total Quality management

19th March 2015

PEC Head quarter, Islamabad


Safety Environment in engineering labs

24th May 2017

Industrial Engineering Department, UET Taxila


Entrepreneurship Summer School

7-17 August 2017

IBA, Karachi