List View
One Page View
Name Dr. Muhammad Ali Nasir
Designation Professor
Department Mechanical Engineering (Taxila)
Highest Qualification Ph.D. Mechanical Engineering
Specialization Composite Materials & Smart Structures, Nano composites, Finite Element Methods, Fiber Metal laminates
Phone No 051-9047688
Cell No 0300-6026290
Fax No 051-9047420
Email [email protected]
  • BSc in Mechanical Engineering,  UET Taxila (2002) 
  • MSc in Mechanical Engineering, UET Taxila (2007)
  • PhD in Mechanical Engineering, UET Taxila (2015)

Composites, Nanocomposites,

Materials characterization,

Advanced Materials,

Fiber Metal laminates

Nanotechnology, Catalytic converter filters,

Hydrogels As passive cooling technique for buildings,

Smart Composites, Coatings,

3D Printed Polymer Composites, Damage Detection in Composites

 

 

Smart Composite Materials, Online Structural Health monitoring of Composite Structures using Smart Sensors, NanoComposites, Fiber Metal Laminates (FMLs), Nanotechnology, Modeling & Simulation(Structural)

List Of Publications

Total Publications: 59

Impact Factor: 125,                     Total Citation: 873 (Up to 13-07-2023)

Research gate profile: https://www.researchgate.net/profile/Muhammad_Ali_Nasir2

https://scholar.google.com.pk/citations?user=VljRNpoAAAAJ&hl=en

  1. Muhammad Ali Nasir, Aneela Wakeel, A review article on the synthesis of Silica Aerogels and their Insulation Properties, International Journal of Emerging Multidisciplinaries: Physical Sciences, 2023.
  2. Mamoona Khalid, Muhammad Usman, Muhammad Ali Nasir, Irfan Arshad, Recent advancements in femtosecond laser inscribed waveguides in germanate glass for∼ 2.1 µm laser applications, 2023, Optik, 170462.
  3. Saad Nauman, Zeeshan Asfar, Sheraz Ahmed, M Ali Nasir, Nourredine Aït Hocine, On the in-situ on-line structural health monitoring of composites using screen-printed sensors, 2023, Journal of Thermoplastic Composite Materials, 234-252
  4. Saif Ullah Khalid, Saqib Hasnain, Hafiz Muhammad Ali, Shehar Bano, Muhammad Ali Nasir, Naseem Abbas, Experimental investigation of aluminum fins on relative thermal performance of sintered copper wicked and grooved heat pipes, 2022, Progress in Nuclear Energy, 104374.
  5. Gohar Alam, Imran Hafeez, Ghulam Yaseen, Muhammad Ali Nasir, Azhar Hussain, Naveed Ahmad, Assessing the aging tendency of asphalt binder using a thermal cycler, 2022, International Journal of Pavement Engineering, 2503-2514.
  6. Furqan Jamil, Hafiz Muhammad Ali, Muhammad Ali Nasir, Shahab Khushnood ; Fundamentals of engineered nanoparticles for wastewater treatment: Challenges and opportunities for resource recovery, Novel Approaches Towards Wastewater Treatment and Resource Recovery Technologies, 2022, 279-294
  7. Muhammad Azhar Hussain, Furqan Jamil, Ali Ejaz, Aneela Wakeel, Saifullah Khalid, Hafiz Muhammad Ali, Muhammad Ali Nasir, Shahab Khushnood, Thermal Performance Of Sintered Copper Wick Heat Pipe Using Water-Based Hybrid Nanofluids: An Experimental Study, 2022, Journal of Porous Media 25 (10)
  8. SU Khalid, HM Ali, MA Nasir, RA Pasha, Z Said, LS Sundar, AK Hussein, 烧结铜丝和沟槽热管热性能特性的实验研究 , 2021, Journal of Central South University, 3507-3520.
  9. SU Khalid, HM Ali, MA Nasir, RA Pasha, Z Said, LS Sundar, AK Hussein; Experimental investigation of thermal performance characteristics of sintered copper wicked and grooved heat pipes: A comparative study, 2021 , JOURNAL OF CENTRAL SOUTH UNIVERSITY, 3507-3520
  10. ZM Khan, S Nauman, MA Nasir ; 5 Structural health monitoring of glass fiber composite materials by piezoelectric nanosensors under cyclic loading, Advanced Ceramics and Applications, 2021,  https://doi.org/10.1515/9783110627992, 61-70.
  11. Muhammad Yasir Khalid, Zia Ullah Arif, Muhammad Fahad Sheikh, Muhammad Ali Nasir; Mechanical characterization of glass and jute fiber-based hybrid composites fabricated through compression molding technique, International Journal of Materials Forming, Springer, 2021,  https://doi.org/10.1007/s12289-021-01624-w, 1-11, (IF = 1.634)
  12. Muhammad Yasir Khalid, Ans Al Rashid, Zia Ullah Arif, Muhammad Fahad Sheikh, Hassan Arshad, Muhammad Ali Nasir, Tensile strength evaluation of glass/jute fibers reinforced composites: An experimental and numerical approach, Results in Engineering, 100232, https://doi.org/10.1016/j.rineng.2021.100232, 2021.
  13. Saad Nauman, Zeeshan Asfar, Sheraz Ahmed, M Ali Nasir, Nourredine Aït Hocine,  On the in-situ on-line structural health monitoring of composites using screen-printed sensors, Journal of Thermoplastic Composite Materials, SAGE, 2021,  https://doi.org/10.1177/08927057211001907, (IF= 1.529)

14. Muhammad Arslan Bin Riaz, Muhammad Ali Nasir, Saad Nauman, et al, Passive cooling performance of polyacrylamide hydrogel on wooden and brick houses and effect of nanoparticle integration on its mechanical strength, Plastics, Rubber and Composites, Taylor & Francis, 2021, https://doi.org/10.1080/14658011.2021.1898880, (IF= 1.543)

15. Furqan Jamil, Hafiz Muhammad Ali, Muhammad Ali Nasir, Mehmet Karahan et al, Evaluation of Photovoltaic Panels Using different nano phase change material and a concise comparison: An Experimental Study, Renewable Energy, Elsevier, 2021, https://doi.org/10.1016/j.renene.2021.01.089, (IF = 6.247)

16. Muhammad Yasir Khalid, Zia Ullah Arif, Muhammad Fahad Sheikh, Hassan Arshad, Muhammad Ali Nasir, Tensile Properties characterization of Glass and Jute Fabric-based Hybrid Composites and Applications in Engineering, 2020.

17. Muhammad Yasir Khalid, Muhammad Ali Nasir, Aakash Ali, Ans Al Rashid, Muhammad Riaz Khan, Experimental and numerical characterization of tensile property of jute/carbon fabric reinforced epoxy hybrid composites, 2020, SN Applied Sciences, 557..

18. Gohar Alam, Imran Hafeez, Ghulam Yaseen, Muhammad Ali Nasir, Azhar Hussain, Naveed Ahmad, Assessing the aging tendency of asphalt binder using a thermal cycler, International Journal of Pavement Engineering, Taylor & Francis, 2020, https://doi.org/10.1080/10298436.2020.1861279, (IF = 2.646)

19. Muhammad Nabeel, Muhammad Ali Nasir, Mariyam Sattar, Rizwan Ahmed Malik et al, Numerical and experimental evaluation of the mechanical behavior of Kevlar/glass fiber reinforced epoxy hybrid composites, Journal of Mechanical Science and Technology, Springer, 2020, DOI 10.1007/s12206-020-1019-1, (IF = 1.345)

20. Zamurrad Arshad, Muhammad Ali Nasir, Yasir Baig, Muhammad Zeeshan et al, Drop Weight impact and Tension-tension Loading Fatigue behaviour of Jute/carbon Fibers Reinforced Epoxy-based Hybrid Composites, Polymer Korea, 2020,https://doi.org/10.7317/pk.2020.44.5.1

21. Safeer Haider, Imran Hafeez, Syed Bilal Ahmed Zaidi, Muhammad Ali Nasir, M Rizwan, A pure case study on moisture sensitivity assessment using tests on both loose and compacted asphalt mixture, Construction and building materials, Elsevier, Vol 239, 2020, https://doi.org/10.1016/j.conbuildmat.2019.117817 (IF = 4.046)

22. Asad Ali, Naeem Ejaz, Sadia Nasreen, Ali Nasir, Liaqat Ali Qureshi, Basem Mohammed Al-Sakkaf, Enhanced Degradation of Dyes present in Textile Effluent by Ultrasound Assisted Electrochemical Reactor, Civil Engineering Journal, Vol 5, Page number 10, DOI: 10.28991/cej-2019-03091399, 2019

23. Nasir Khan, Jingyang Pu, Chunsheng Pu, Hongxing Xu, Xiaoyu Gu, Zhang Lei, Feifei Huang, Muhammad Ali Nasir, Rooh Ullah, Experimental and mechanism study: Partially hydrolyzed polyacrylamide gel degradation and deplugging via ultrasonic waves and chemical agents, Ultrasonics sonochemistry, Elsevier, Volume 56, Pages 350-360,https://doi.org/10.1016/j.ultsonch.2019.04.018, 2019 (IF=7.279)

24. Mehmet Karahan, Nevin Karahan, Muhammad Ali Nasir, Yasir Nawab, Effect of structural hybridization on ballistic performance of aramid fabrics, Journal of Thermoplastic Composite Materials, (2018) https://doi.org/10.1177/0892705718780197 (IF=1.343)

25. Muhammad Awais, Raji Sundararajan, Intisar Ali Sajjad, Shaikh Saaqib Haroon, Salman Amin, Hammad Shaukat, Muhammad Ali Nasir, Investigation on optimal filler loadings for dielectric strength enhancement of epoxy/TiO2@ SiO2 nanocomposite, 2019, Materials Research Express, 065709.

26. Muhammad Awais, Raji Sundararajan, Intisar Ali Sajjad, Shaikh Saaqib Haroon, Salman Amin, Hammad Shaukat, Muhammad Ali Nasir, Materials Research Express, Vol 6, Issue 6, 2019 https://doi.org/10.1088/2053-1591/ab0ef2, 2019, (IF=1.449)

27. Shah Rukh, Riffat Asim Pasha, Muhammad Ali Nasir, Heat Transfer Enhancement of Round Pin Heat Sinks using N-eicosane as PCM: An Experimental Study, Heat and Mass transfer, Springer Nature, DOI: 10.1007/s00231-018-2411-6 (July 2018) (IF=1.551)

28. Aakash Ali, Muhammad Ali Nasir, Muhammad Yasir Khalid, Saad Nauman, Khubab Shaker, Shahab Khushnood, Khurram Altaf, Muhammad Zeeshan, Azhar Hussain, Experimental and numerical characterization of mechanical properties of carbon/jute fabric reinforced epoxy hybrid composites, Journal of Mechanical Science and Technology, Pages 1-10, 33(9), 2019 DOI:10.1007/s12206-019-0817-9, 2019, (IF=1.221)

29. Murryam Hafeez, Naveed Ahmad, Mumtaz Ahmed Kamal, Javaria Rafi, Syed Bilal Ahmed Zaidi, Muhammad Ali Nasir, Experimental Investigation into the Structural and Functional Performance of Graphene Nano-Platelet (GNP)-Doped Asphalt, Applied Sciences, MDPI, Vol 9, Issue 4, Page 686, https://doi.org/10.3390/app9040686, 2019, (IF=2.217)

30. Saamia Zahid, Muhammad Ali Nasir, Saad Nauman, Mehmet Karahan, Yasir Nawab, HM Ali, Yasir Khalid, Muhammad Nabeel, Mudaser Ullah, Springer, Experimental analysis of ILSS of glass fibre reinforced thermoplastic and thermoset textile composites enhanced with multiwalled carbon nanotubes, Journal of Mechanical Science and Technology, Vol 33, Issue 1, Pages 197-204, DOI 10.1007/s12206-018-1219-0, 2019, (IF=1.221)

31. Basit Yaqoob, Riffat Asim Pasha, Mokhtar Awang, Muhammad Ali Nasir, Azhar Hussain, Kamran Nazir, Comparison of Mixing Strategies and Hybrid Ratio Optimization for Mechanical Properties Enhancement of Al-CeO2-GNP’s Metal Matrix Composite Fabricated by Friction Stirr processing, Metallography, Microstructure, and Analysis. Springer US, Volume 8, Issue 4, Pages 534-544, https://doi.org/10.1007/s13632-019-00553-0, 2019

32. Muhammad Ali Nasir, Sharjeel Isaac, Riffat Asim Pasha, Aneela Wakeel, Tanzeel Ur Rashid, Mechanical characterization of copper nanoparticles based glass fibre reinforced polymer composites, 2018, Technical Journal, 35-39.

33. Muhammad Faizan ul Haq , Naveed Ahmad, Muhammad Ali Nasir, Jamal Nasir, Murryam Hafeez , Javaria Rafi , Syed Bilal Ahmed Zaidi and Waqas Haroon, Carbon Nanotubes (CNTs) in Asphalt Binder: Homogeneous Dispersion and Performance Enhancement, Applied Sciences, MDPI, Vol 8, Issue 12, https://doi.org/10.3390/app8122651, 2018, (IF=2.217)

34. Taimoor A Khan, Saad Nauman, Zeeshan Asfar, M Ali Nasir, Zaffar M. Khan , Screen-printed nanocomposite sensors for online in situ structural health monitoring, Journal of Thermoplastic Composite Materials, SAGE, Vol 31, Issue 12, PP:1-18, DOI:https://doi.org10.1177/0892705719877218, 2018, (IF=1.343)

35. Muhammad Anas, Muhammad Ali Nasir, Zeeshan Asfar, Saad Nauman, Mehmet Akalin, Faiz Ahmad, Structural health monitoring of GFRP laminates using graphene-based smart strain gauges, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, Vol 40, Issue 8, August, 2018, 10.1007/s40430-018-1320-4 (IF= 1.743)

36. Shah Rukh, Riffat Asim Pasha, Muhammad Ali Nasir, Heat Transfer Enhancement of Round Pin Heat Sinks using N-eicosane as PCM: An Experimental Study, Heat and Mass transfer, Springer Nature, DOI: 10.1007/s00231-018-2411-6 (July 2018) (IF=1.551)

37. Mehmet Karahan, Nevin Karahan, Muhammad Ali Nasir, Yasir Nawab, Effect of structural hybridization on ballistic performance of aramid fabrics, Journal of Thermoplastic Composite Materials, (2018) https://doi.org/10.1177/0892705718780197 (IF=1.343)

38. Rafi Ud Din, Qaisar Abbas Shafqat, Zahid Asghar, GH Zahid, Abdul Basit, AH Qureshi, Tanvir Manzoor, Muhammad Ali Nasir, Fahad Mehmood, Kaleem Imdad Hussain Microstructural Evolution, Powder Characteristics, Compaction Behavior and Sinterability of Al 6061–B4C Composites as a Function of Reinforcement Content and Milling Times, Russian Journal of Non-Ferrous Metals Vol. 59, No. 2, pp. 207–222. © Allerton Press, Inc., Springer, March, 2018 DOI: 10.3103/S1067821218020098 (IF=0.497)

39. Aneela Wakeel, Muhammad Ali Nasir, Riffat Asim Pasha, NA Anjum, Jarair Shafique, Experimental and Numerical Simulation of Brinell Hardness Test of Al7075 Alclad T6 in Abaqus, Technical Journal UET Taxila, Vol 23, Issue 1, PP 59-63, 2018 (Y-Category)

40. Riffat Asim Pasha, Huda Hanif Khan, Muhammad Ali Nasir, NA Anjum, Hafiz Wasif Sardar ,Effect of Rubber particles on Kevlar Fiber Reinforced Polymer composite against High Velocity Impact, Technical Journal, UET Taxila, Vol 23, Issue 1, PP 35-42, 2018 (Y-Category)

41. Yasir Bilal, Muhammad Ali Nasir, Sadia Nasreen Niaz Ahmed Akhter, Riffat Asim Pasha, Muhammad Farhan Noor, Synthesis and Activity Evaluation of Ce-Mn-Cu Mixed Oxide Catalyst for Selective Oxidation of CO in Automobile Engine Exhaust: Effect of Ce/Mn Loading Content on Catalytic Activity, Advances in Science and Technology Research Journal Adv. Sci. Technol. Res. J. 2018; 12(1) DOI: 10.12913/22998624/81190, Pages 260-266, 2018, (IF=0.35)

42. Faryal Khan; Faisal Qayyum; Waqas Asghar; Muhammad Azeem, Zeeshan Anjum; Muhammad Ali Nasir; Masood Shah., Effect of various surface preparation techniques on the delamination properties of vacuum infused Carbon fiber reinforced aluminum laminates (CARALL): Experimentation and numerical simulation (2017) Vol 31 (11), PP: 5265-5272, DOI: 10.1007/s12206-017-1019-y, (IF=1.221)

43. M I. Farooqi, M. A. Nasir, H. M.Ali, Y. Ali, Experimental validation of the Transverse shear behavior of a Nomex core for sandwich panels, Mechanics of Composite Materials, Springer US, Vol 53, No. 2, PP 1-12, 2017 (IF=0.703)

44. Muhammad Haris Ameer; Khubab Shaker; Munir Ashraf; Mehmet Karahan; Yasir Nawab; Sheraz Ahmad; Muhammad Ali Nasir, Interdependence of moisture, mechanical properties and hydrophobic treatment of jute fibre reinforced composite materials, The Journal of The Textile Institute (TJTI), Taylor & Francis, Vol: 108, PP: 1768-1776, DOI: 10.1080/00405000.2017.1285201, 2017 (IF=1.063)

45. Muhammad Farhan Noor, Riffat Asim Pasha, Aneela Wakeel, Muhammad Ali Nasir, Yasir Bilal "Effect of Thermal Cycling on the Tensile Behavior of CF/AL Fiber Metal Laminates,"Advances in Science and Technology Research Journal, Adv. Sci. Technol. Res. J. 2017; 11(3) Vol 11, Issue 3, https://doi.org/10.12913/22998624/73820, 2017. (IF=0.35)

46. Waqas Aghar; Muhammad Ali Nasir; Faisal Qayyum; Masood Shah; Muhammad Azeem; Saad Nauman, and Shahab Khushnood, Investigation of Fatigue Crack Growth Rate in CARALL, ARALL and GLARE, Fatigue & Fracture of Engineering Materials & Structures, DOI: 10.1111/ffe.12566 (2017), (IF=2.553)

47. Rahim Jan; Amir Habib; Zaffar M Khan; Muhammad B Khan; Muhammad Anas; Ali Nasir; Saad Nauman, Liquid exfoliated Graphene smart layer for structural health monitoring of composites, Journal of Intelligent Material Systems and Structures, JIMSS, DOI: 10.1177/1045389X16672729 (2016) (IF=2.582)

48. M. Arshad Javid, M. Rafi, Ihsan ali, Fayyaz hussain, M. Imran, Ali Nasir, Synthesis and study of structural properties of Sn doped ZnO nanoparticles, Materials Science-Poland, DOI: 10.1515/msp-2016-0109 (2016) (IF=0.918)

49. M. A. Nasir, Z. Khan, I. Farooqi, S. Nauman, S. Anas, S. Khalil, A. Pasha, М. Shah, H. Qaiser, R. Аta Transverse Shear Behavior of Nomex Core for Sandwich Panels, Mechanics of Composite Materials, Springer US, Vol. 50, Issue 6, (2014), and DOI: 0191-5665/15/5006-0733 pp. 1025-1032 (2015) (IF=0.703)

50. Muhammad Ali Nasir, Hina Akram, Zaffar M Khan, Masood Shah, Saad Anas, Zeeshan Asfar and Saad Nauman, Smart sensing layer for the detection of damage due to defects in a laminated composite structure, Journal of Intelligent Material Systems and Structures, JIMSS, pp. 1-7 DOI: 10.1177/1045389X14554138, (2014) (IF=2.583)

51. Haroon Qaiser, Suniya Umar, Ali Nasir, Masood Shah & Saad Nauman, Optimization of Interlaminar shear strength behavior of anodized and unanodized ARALL composites fabricated through VARTM process, International Journal of Materials Forming, Springer-Verlag France, Pages 134-134 DOI 10.1007/s12289-014-1192-9, (2014) (IF=1.750)

52. Muhammad Ali Nasir, Zaffar Khan, et al., Density variation effects on cross dimension (CD) strength of Phenolic multilayered composites fabricated via VARTM, The Nucleus, 2014, Pages 13-18, Vol 51, issue No 1, (2014) (Y-Category)

53. Rana Atta-ur-Rahman, M. Ali Nasir, et al, Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading, Life Science Journal, DOI: 10(12s):678-683, 2013 (IF=0.165)

54. Hafiz Muhammad Ali, Muhammad Abdullah ZAFAR, Muhammad Anser BASHIR, Muhammad Ali NASIR, Muzaffar ALI and Aysha Maryam SIDDIQUI, Effect of dust deposition on the performance of photovoltaic modules in Taxila, Pakistan, Thermal Science, DOI: 10(12s):678-683 (2015) (IF=1.543)

55. M. A. Nasir, M. Ullah, Z. M. Khan,S. Nauman, S. Anas, R. A. Pasha, M. Shah, Tensile Strength changeability of Multilayered Composites, fabricated through Optimized “VARTM” Technology, An experimental Approach, Technical Journal 2015, Issue IV, Vol 20, 2015 PP: 54-60 (Y-Category)

56. M. Ullah, G. Y. Chohan, Q. Ali, M. A. Nasir, Microstructural Study & Assessment of Endurance limit through Numerical Simulation in TIG welded Aluminum Alloy (AA2219-T87), Technical Journal 2015, Issue IV, Vol 20, 2015, PP: 61-68 (Y-category)

57. Aysha Maryam SIDDIQUI, Waqas ARSHAD, Hafiz Muhammad ALI, Muzaffar ALI and Muhammad Ali NASIR, Evaluation of Nanofluids Performance for Simulated Microprocessor, Thermal Science Journal, DOI: 10.2298/TSC1150131159S (2015) (IF=1.543)

58. Rizwan Aziz, Riffat Asim Pasha, Muhammad Ali Nasir, Musharraf Abbas, Evaluation of optimal top coat thickness in composite LTA/YSZ thermal barrier coating by comparative stress distribution using finite element method, The Nucleus, Vol 52, No 4, 2015, PP: 146-150 (2015) (Y-Category)

59.Saad Anas; Ghufran Ur Rehman; Zaffar Mohammad Khan; Noaman Ul-Haq; Muhammad Bilal Khan; Saad Nauman; Muhammad Shahid; Ali Nasir, Influence of MWCNTS as secondary reinforcement material in glass fiber/epoxy composites fabric using VARTM, Applied Polymer Composites, Smithers  Rapra, UK, PP 17-26, Vol 2, Issue 1, 2014

 

 

(1) Chairman, Metallurgy & Materials Engineering Department, UET Taxila (2 Months)

(2) Resident Tutor of Student Hostel for a period of 5 Years.

(2) Member University Central Sports Committee.

(3) Director, Board of Undergraduate studies

(4) Director Post graduate studies, Department of Mechanical Engineering since 2015

(5) Incharge Scholarships, UET Taxila

(1)- Developed Engineering Mechanics Laboratory in Mechanical Engineering Department,2004-5.

(2)- Developed Modeling & Simulation laboratory in Mechanical Engineering Department, 2011.

(3)- Designed & Developed "Composite Materials & Smart Structures Laboratory" in Mechanical Engineering Department, 2013-14.

19  years and 10 months experience of Teaching, Research & Development  at Mechanical Engineering Department, University of Engineering & Technology, Taxila, Pakistan.

(1) Pakistan Engineering Council 

(2) Member Asian Council of Science & Editors

(3) SAMPE

Teaching several courses of Mechanical Engineering:

  • Engineering Statics
  • Engineering Dynamics
  • Machine Design & CAD
  • Finite Element Analysis(ANSYS 10.0)
  • Composite Materials
  • Nanotechnology
  •  

Softwares:

  • ANSYS 10.0
  • ANSYS workbench
  • AUTOCAD
  • PRO/E WILDFIRE
  • CATIA.
  • ABAQUS

(1) Professor, Mechanical Engineering Department, UET Taxila (16-02-2021  To date)

(2) Associate Professor,  Mechanical Engineering Department, UET Taxila (12-05-2016 To 15-02-2021)

(3) Assistant Professor, Mechanical Engineering Department, UET Taxila (02-12-2005 To 11-05-2016)

(4) Lecturer, Mechanical Engineering Department, UET Taxila (31-05-2003 To 01-12-2005)

List of MSC Thesis Supervised by Prof. Dr. Muhammad Ali Nasir

  1. “Silver Nano Particles nased real time Structural health monitoring system for composite structures ”,  Student name: Zia-Ur-Rehman (14-MS-PT-AMD-12)
  2.  “Experimental analysis of interlaminar shear strength of glass fiber reinforced thermoplastic polyurethane composite enhanced with multiwalled carbon nanotubes.”, Student name: Saamia Zahid (14-MS-PT-AMD-01)
  3. “To Investigate the Fiber Reinforcement Effect on Mechanical and Thermal Properties of Silica Aerogel Using Ambient Pressure Drying Technique”, October 2022, Student name: Muhammad Ammar (18-MS-PT-AMD-03)
  4. “Recovery of bioethanol through pervaporation using biopolymer based composite membranes”, November, 2022, Student name: Asif Shahzad (18-MS-PT-EnE-06)
  5. “Performance Characterization of Nano-Additives in Lead Acid Batteries”, November, 2022, Student name: Tallat Masood (17-MS-PT-AMD-01)
  6. “Development and Experimental Investigation of Elastic and Ultraviolet Resistant durable PVC pipes”, November, 2022, Student name: Rehman Khan (19-MS-ME-AMD-30)
  7. “Design and Analysis of Composite Based Radome for Aerospace Applications”, November, 2021, Student name: Muhammad Talha Aamir (19-MS-ME-AMD-12)
  8. “Development and Characterization multinetwork hydrogels for building cooling Applications”, November, 2019, Student name: Muhammad Arsalan (17-MS-FT-MME-02)
  9. “Mechanical Charactization of hybrid Kevlar Fabric Reinforced Epoxy/ Thermoplastic Polyurethane Composites enhanced with Nanoparticles”, August, 2018, Student name: Muhammad Nabeel (16-MS-AMD-08)
  10. “Numerical evaluation of mechanical parameters of hybrid epoxy composite laminates”, May, 2018, Student name: Akash Ali
  11. “Experimental evaluation of the mechanical properties of Hybrid jute /fabric as reinforcement epoxy thermoplastic poly urethane-based nanocomposites”, May, 2018, Student name: Muhammad Yasir Khalid (16-MS-FT-AMD-03)
  12. “Experimental Analysis on Thermal Regulation of Photovoltaic Panels using Integrated Phase Change Material with Nanoparticles”, September, 2019, Student name: Furqan Jamil (18-MS-FT-TSE-04)
  13.  “Effect of Tungsten Grain Size on The Microstructure and Mechanical Properties of Tungsten Heavy Alloy 93W 4.2Ni 2.5Fe0.3Co”, August, 2018, Student name: Muhammad Soban Arshad (15-MS-PT-AMD-01)
  14. “Mechanical Characterization of Hybrid Composite Structures”, May, 2018, Student name: Zamurrad Arshad (17-MS-FT-AMD-08)
  15. “Mechanical Characterization of Basalt Fiber Reinforced Polymer Composites”, May, 2018, Student name: Muhammad Nasir (15-MS-PT-AMD-09)
  16. “Synthesis and characterization of nano metallic composite based catalytic converter”, Feb, 2018, Student name: Yasir bilal (15-MS-MMED-FT-01)
  17. “To develop & characterize the glass fibre-copper Nano -particles Reinfoced epoxy based composite”, July, 2017, Student name: Sirjeel Isaac (14-MS-MME-PT-14)
  18. “Experimental analysis of interlaminar shear strength of glass fibre reinforced thermoplastic polyurethane composite enhanced with multiwalled carbon nanotubes”, July, 2017, Student name: Saamia Zahid (14-MS-PT-AMD-01)
  19. “To develop & characterize thermal & mechanical effect of different ceramic nano particles as a filler in carbon-phenolic composite”, February, 2017, Student name: Muhammad sajid Hussain (14-MS-MME-PT-13)
  20. “Gold nano particles based structural health monitoring of composite structures”, January, 2017, Student name: Muhammad Awais saeed (14-MS-FT-AMD-03)
  21. “Effects of physical & mechanical properties of metal powder compacts due to variation in compaction, sintering & subsequent hot working”, August, 2016, Student name: Fahad Mahmood (14-MS-MME-FT-02)
  22. “Determination of fatigue crack growth rate of fibre metal laminates”, February, 2016, Student name: Waqas Asghar (13-MS-PT-AMD-06)
  23. “Determination of Transverse Shear Modulus of Honeycomb Core for Sandwich Panels”, April, 2014, Student name: Muhammad Ilyas Farooqi (10-MS-AMD-02)