List View
One Page View
Name Dr. MIRZA JAHANZAIB
Designation Professor
Department Department of Industrial Engineering
Phone No +92-51-9047826
Cell No 03015534850 (whatsapp only)
Fax No +92-51-9047420
Email [email protected]

PhD. Engg (Mechanical Engineering -Jan 2008) (spec: Ind & Manu)

MSc. Engg (Mechanical Engineering -July 2001) (spec: Ind & Manu)

BSc. Engg (Mechanical Engineering-Oct 1996)

Research Keys words:

Advanced Manufacturing Process, Non Conventional Machining, Sustainable Manufacturing, Energy Policy

Simulation and Analysis, Design of Advanced Manufacturing Systems

IMPACT FACTORED:

SCIE (THOMSON REUTERS/ ISI- Web of Science) IF=40.546 

  1. Hussain S, Jahanzaib M "Sustainable Manufacturing – An Overview and Conceptual framework for continuous transformation and competitiveness" Advanced Production and Engineering Management, , accepted for publication September 2018 (IF 1.596)
  2. Khurram Altaf , ID , Junaid A. Qayyum , Ahmad Majdi A. Rani , Faiz Ahmad, Puteri S. M. Megat-Yusoff , Masri Baharom, Abdul Rashid A. Aziz,  Mirza Jahanzaib Randall M. German, "Performance Analysis of Enhanced 3D printed Polymer Molds for Metal Injection Polymer Process , Metals, MDPI Journal, Volume 8, Issue 6, June 2018 (IF 1.704)
  3. Osama Waleed Qazi, Mirza Jahanzaib, ‘An integrated Sectoral Framework for the Development of Sustainable Power Sector in Pakistan’,,Energy Reports, Elsevier 2018
  4. Asad Ali, Mirza Jahanzaib, Salman Hussain, Ahmad Wasim, Nazeer Anjum, ‘Evaluating the effects of as-casted and aged overcasting of Al-Al joints’, International Journal of Advanced Manufacturing Technology, January 2018, (IF 2.209)
  5. Muhammad Imran, Changwook Kang, Young Hae Lee, Mirza Jahanzaib, Haris Aziz, ‘Cell Formation in a Cellular Manufacturing System Using Simulation Integrated Hybrid Genetic Algorithm’,  Volume 105, pp: 123-135, Computers and Industrial Engineering, 2017,  (IF-2.086)

  6. Junaid Abbasi, Mirza Jahanzaib, Muhammad Azam, Wasim Ahmad, Salman Hussain, Musharraf, ‘Effects Of Wire-Cut EDM Process Parameters on Surface Roughness of HSLA Steel’, Accepted 13th December, 2016, International Journal of Advanced Manufacturig Technology, (IF-1.568)

  7. Usama Qazi, Mirza Jahanzaib, 'An Institutional Framework for the Development of Sustainable and Competitive Power Market in Pakistan', Vol 70 (2017), pp 83-95, http://dx.doi.org/10.1016/j.rser.2016.11.152,  Renewable & Sustainable Energy Reviews,    (IF 6.798)

  8. Masood I, Jahanzaib, M, Haider A, ‘Tool Wear and Cost Evaluation of face Milling Grade 5, Titanium Alloy for Sustainable Manufacturing’, Advances in Production Engineering & Management (APEM) Volume 11, No 3, pp 239-250, September 2016. (IF 1.125)                                      
  9. Shoaib Sarfraz, Mirza Jahanzaib, Investigating the effects of as-casted and in-situ heat treated squeeze casting of Al-3.5%Cu alloy, International Journal of Advanced Manufacturing Technology, August 2016, (IF 1.568)                                                                                                                                         
  10. Mirza Jahanzaib, Salman Hussain, Ahmad Wasim, Haris Aziz, Adnan Mirza, Saif Ullah, Modeling of Weld Bead Geometry on HSLA Steel using Response Surface MethodologyInternational Journal of Advanced Manufacturing Technology, 2016, (IF 1.568)                                                                                                                                                            
  11. Muhammad Azam, Mirza Jahanzaib, Junaid Ali Abbasi, Ahmad Wasim, ‘Modeling of cutting speed (CS) for HSLA steel in wire electrical discharge machining (WEDM) using moly wire’, Journal of Chinese Institute of Engineers, April 2016, (IF 0.241)                                                   
  12. Wasif Safeen, Salman Hussain, Wasim Ahmad, Mirza Jahanzaib, Haris Aziz, Hassan Abdalla, ‘Predicting the Tensile Strength, Impact Toughness, and Hardness of Friction Stir Welded AA 6061-T6 using Response Surface Methodology’, International Journal of Advanced Manufacturing Technology, March 2016, (IF 1.568)                                                     
  13. Saif Ullah, Zailin Guan,Li Zhang, Fei Zhang, Baoxi Wang, Jahanzeb Mirza, ‘Multi-Objective Artificial Bee Colony Algorithm for Order Oriented Simultaneous Sequencing and Balancing of Multi-Mixed Model Assembly Line, Journal of Intelligent Manufacturing 2016, (IF 1.731)                                                                                                               
  14.  Muhammad Azam, Mirza Jahanzaib, Junaid Ali Abbasi, Musharaf Abbas, Ahmad Wasim, Salman Hussain, ‘Parametric Analysis of Recast Layer Formation in Wire-cut EDM of HSLA Steel’, International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-016-8518-3Feb 2016, (IF 1.568)                                                                               
  15. Ullah Saif, Zailin Guan, Li Zhang, Jahanzeb Mirza & Yue Lei, ‘Hybrid Pareto Artificial Bee Colony Algorithm for Assembly Line Balancing with Task Time Variations, International Journal of Computer Integrated Manufacturing, published online 29th Feb, 2016,http://dx.doi.org/10.1080/0951192X.2016.1145802  (IF 1.319)                                               
  16. Neelum, H Aziz, M Jahanzaib, Waseem Ahmad, S Hussain, ‘Integration of Cell Formation and Job Sequencing to Minimize Energy Consumption With Minimum Make-Span’, Journal of Engineer Manufacture Part B, Jan 2016. (IF 0.978)                                                                     
  17. Muhammad Azam, M Jahanzaib, Wasim Ahmad, S Hussain, ‘ Surface Roughness Modeling using RSM for HSLA Steel by Coated Carbide Tools, Vol 78, Issue 5, pp- 1031-1041, International Journal of Advanced Manufacturing Technology, May, 2015. (IF 1.568)            
  18. Ali Rizwan, Muhammad Abbas Choudhary, Mirza Jahanzaib, Ai Imran, Umair Manzoor, Ammar Ali, “Analysis of factors affecting the stress level of Engineering Students from Remote Areas”, International Journal of Engineering Education, Vol 29, No 4, pp.926-932, 2013 (IF 0.36)                                                                                                                                              
  19.  Mirza Jahanzaib, Syed Athar Masood, Shahid Nadem, Khalid Akhtar, “A Genetic Algorithm (GA) Approach for the Formation of Manufacturing Cells in Group Technology” LSJ, Acta Zhengzhou University Oversea Version, Marsland Press 2012;9(4):799-809(ISSN:1097-8135) (ISI Indexed, IF = 0.165)                                                                                                                 
  20. Mirza Jahanzaib, Syed Athar Masood, Khalid Akhtar, “A Study for Analyzing Effects of Design Parameters in the Sand Casting Process of Aluminum Alloy” LSJ Acta Zhengzhou University Oversea Version, Marsland Press, 2012;9(4):891-898 (ISSN:1097-8135). (ISI Indexed, IF = 0.165)                                                                                                                                   
  21. 13.  Syed Athar Masood, Mirza Jahanzaib, Khalid Akhtar, “Do actions speak louder than words? An empirical investigation in terms of organizational performance in manufacturing organizations”, LSJ Acta Zhengzhou University Oversea Version, Marsland Press, 2012;9(4):687-693 (ISSN:1097-8135) 107, (ISI Indexed, IF = 0.165)                                              
  22. M. Jahanzaib., Khalid Akhtar, “Technology Driven Strategy Using Machine Automation Cost in Discrete Parts Manufacturing”,Kuwait Journal of Science and Engineering (KJSE), Vol: 34 issue 2B, pp.207-224, Dec-2007. (IF 0.16)                                                                                     
  23. Haider A, Mirza J, Ahmad W, ‘Lean Capacity Planning for Tool Room: An Iterative System Improvement Approach’, Advances in Production Engineering & Management (APEM), Vol 10, No4, December 2015, pp 169-184. SCI Expanded, Master Journal List, Thomson Reuters, ISI web of Science(IF 1,125)                                                                                                     
  24. Haider,A, Mirza, J, ‘An Implementation of Lean Scheduling in Job Shop Environment, Advances in Production Engineering & Management (APEM) , Vol 10, No1, March 2015, pp 5-17. SCI Expanded, Master Journal List, Thomson Reuters, ISI web of Science (IF 1.125)                                                                                                                                                                                                                                                                                     INTERNATIONAL REFREED JOURNALS:
  25. Khurram Altaf, Masri Baharom , A. Rashid A. Aziz , Junaid A. Qayyum and Mirza Jahanzaib, "Rapid Prototyping of a Customized Cooling System for a Novel Crank Rocker Engine" International Journal of Engineering & Technology, 7 (3.17) 90-93(2018)
  26. Kashif Ishfaq , Nadeem Ahmad Mufti , Muhammad Jawad, Muhammad Sajid , Mirza Jahanzaib, "Analysis of the effect of wire electric discharge machining process parameters on the formation of high speed steel form tool " Advances in Science and Technology Research Journal Volume 12, Issue 1, , pages 89–98 DOI: 10.12913/22998624/81001, March 2018 . Emerging Source Citation Index, Thomson Reuters, ISI, web of science  
  27. Muhammad Sajid, Fahad Almufadi, Mirza Jahanzaib ‘Chaotic Behavior in a Flexible Assembly Line of a Manufacturing System’, Engineering, Technology and Applied Science Research, Vol 5, No 6, 2015, pp 891-894. Emerging Source Citation Index, Thomson Reuters, ISI, web of science                                                                                                                      
  28. Ullah SAIF, Zailin GUAN, Boaxi WANG, Jahanzeb MIRZA, ‘Pareto lexicographic α-robust approach and its application robust objective assembly line balancing problem, Frontiers of Mechanical Engineering 2014, vol 9, issue 3, pp-257-264, Springer, DOI 10.1007/s11465.014.0294-x.Emerging Source Citation Index, Thomson Reuters, ISI, web of science                                                                                                                                                          
  29. Ullah SAIF, Zailin GUAN, M. Jahanzeb, Boaxi WANG, Shiyang HUANG, ‘Survey of Assembly Lines and its Types, Frontiers of Mechanical Engineering 2014,9(2): 95–105,  Springer, DOI 10.1007/s11465-014-0302-1.Emerging Source Citation Index, Thomson Reuters, ISI, web of science                                                                                                                                               
  30. Abaid Ullah, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib,Usage and Impacts of speed Humps on Vehicles: A Review’, Journal of Advanced Reviews on Scientific Research, Vol 28, issue 1 2016, 1-17                                                                                                                                
  31. I. K. Javed, M. Jahanzaib, A. Wasimand H. Salman, ‘Role of Organisational Behaviour (OB) to Enhance Productivity in a Public Sector Enterprise’, Journal of Advanced Research in Business and Management Studies, ISSN (online): 2462-1935 | Vol. 3, No. 1. Pages 11-25, 2016                                                                                                                                                              
  32. Mirza Jahanzaib, Madiha Idrees, Ahmad Wasim, Salman Hussain, Haris Aziz, ‘A Framework for Implementing Quality Function Deployment (QFD) For Utility Services’ IOSR Journal of Business and Management (IOSR-JBM) , Vol 18, issue 4, Ver II, pp92-99, April 2016              
  33. Muhammad Irshad Yehya, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, Hassan Abdalla, ‘A Cost Effective and Light Weight Unipolar Electroadhesion Pad Technology for Adhesion Mechanism of Wall Climbing Robot’, International Journal of Robotics and Mechatronics, Vol 2, No1, 2015                                                                                                             
  34. Khurram Altaf, Junaid A Qayyum, Majdi Rani, Faiz Ahmad, Puttri Megat Yousaf, Masari Baharom, Rashid Aziz, Mirza Jahanzaib, randall German, ‘ Performance Analysis of Enhanced 3D Polymer Molds for Metal Injection Molding Process, Metals 2018, 8, 433, doi:10.3390/met8060433
  35. Saif Ullah, Guan Zailin, Xu Xianhao, He Zongdong , Wang Baox, Mirza Jahanzeb, ‘Modeling of Facility Location Problem for Reverse Logistics System with Uncertainty in Forward and Reverse Flows of Products’, International Journal of Mechanical Engineering and Robotics Research, Vol 4, No 3, pp-242-246, July 2015                                                                                      
  36. Muhammad Umair, Muhammad Abbas, Chaudhary, Mirza Jahanzaib, “A Review of Large-Scale Hydropower Project in Public Sector of Pakistan”, KICEM Journal of Construction Engineering and Project Management, Vol 4, No 4, pp. 47-59, Dec 2014 ISSN 2233-9582, http://dx.doi.org/10.6106/JCEPM.2014.4.4.047                                                                                    
  37. Tahla I Khan., M. Jahanzaib, “Modeling and Flow Behavior Analysis of Inner Plenum using Computational Fluid Dynamics”, European Journal of Scientific Research, Volume 56, issue 3, pp-346-353, 2011                                                                                                                        
  38. Abid Ali, Rafi Javed Qureshi,Jahanzaib Mirza "Performance Improvement of Flexible Manufacturing System: A Case Study"Research Journal of Science and IT Management, Volume: 02, Number: 06, April-2013                                                                                                       
  39. Mirza Jahanzaib, Ather Masood, Khalid Akhtar, Talat Aslam, “Improvement in Subsisted Product Delivery Process of Manufacturing Organization using Concurrent Engineering”,  Life Sci J, Acta Zhengzhou UniversityOversea Version, Marsland Press, 2013; 10(4s): 185-194 (ISSN:1097-8135)                                                                                                                               
  40. Ather Masood, Mirza Jahanzaib, Khalid Akhtar, “Key Performance Indicators Prioritization in Whole Business Process: A Case of Manufacturing Industry”, LSJ, Acta Zhengzhou UniversityOversea Version, PO BOX 21126, LANSING, USA, MI, 48909, Marsland Press, 2013; 10(4s): 195-201 (ISSN:1097-8135)                                                                                             
  41. Mirza Jahanzaib,Ather Masood, Khalid Akhtar, Khurram Ali“Managing Competitiveness using Production Volumes - Product Variety Model for Automobile Industry”.  LSJ, Acta Zhengzhou University Oversea Version, PO BOX 21126, LANSING, USA, MI, 48909, Marsland Press, 2013; 10 (4s): 202-208 (ISSN:1097-8135)                                                              
  42. Mirza Jahanzaib, Syed Athar Masood, Khalid Akhtar, Fahad Al Mufadi, “Performance Analysis of Process Parameters Effecting the Automated Assembly System”. LSJ, Acta Zhengzhou University Oversea Version, 2013;10(1):64-68 (ISSN:1097-8135)                                                 
  43. Mirza Jahanzaib, Syed Athar Masood, Omer Jamil, Khalid Akhtar, “Product Design Variables Optimization using Design for Six Sigma (DFSS) Approach”. LSJ, Acta Zhengzhou University Oversea Version, Marsland Press2013;10(1):57-63 (ISSN:1097-8135)                     
  44. Syed Gul Hassan naqvi, Syed Ather Masood, Shahab Khushnood, Ali Rizwan, Mirza Jahanzaib, “The Rollover Prediction and Prevention of Bullet Proof Vehicles for Improved Stability”, LSJ, Acta Zhengzhou University Oversea Version, Marsland Press, 2013; 10(4s): 209-214 (ISSN:1097-8135)                                                                                                         
  45. Ghulam Zakria, Yasser Riaz, Mirza Jahanzaib, M. Anwar Khan, “Selecting and Prioritizing Key Factors for CAD/CAM Software in Small and Medium Sized Enterprises Using A.H.P.”Frontiers of Mechanical Engineers in China, March 2010, Vol 5, Issue 2, pp 157-164  
  46. Aftab. A. Haider,M. Jahanzaib, Khalid Akhtar, “Experimental Comparison of one Piece Flow Production: A Simulation Based Approach”,European Journal of Scientific Research, ISSN 1450-216X, Vol.19 No.1 (2007), pp.97-104                                                                                          
  47. M. Jahanzaib., Dr. Khalid Akhtar, “Macro and Micro Strategies Using Performance Value Analysis for Low Volume- Low Variety Manufacturing Environment”,European Journal of Scientific ResearchVol 15, No. 1 2006, pp. 64-74                                                                             
  48. M. Jahanzaib., Dr. Khalid Akhtar, “Strategies for Low Production Volumes - Low Variety Manufacturing Environment for Automobile Industry – A Normative Approach”. World Transactions on Business & Economics. Issue 4, Vol 2, Oct 2005 ISSN: 1109-9526 pp. 253-258 (ISI/Scopus/Ulrich)(approved by HEC/PEC).                                                                                                                                                                                                                                                                                                                                                                                                                                              HEC RECOGNIZED (X/Y CATEGORIES) JOURNALS:                                       
  49. M. Ahsan Ul Haq* , Salman Hussain, Wasim Ahmad, Mirza Jahanzaib, Waseem Iqbal and Saira Shehzadi, "Optimization of Surface Roughness and MRR in Powder Mix EDM Die-Sink for Inconel 718 using RSM ", Journal of Basic & Applied Sciences, 14, 98-106, 2018
  50. Hassan Sarfraz, Mirza Jahanzaib, Muhammad Jawad, "Multi-response optimization of process variables in squeeze casting of al 6063-sic composite" NED University Journal of Research - An International Journal, accepted for publication, August 2018
  51. Muhammad Ali Bin Manzoor* , Salman Hussain, Wasim Ahmad and Mirza Jahanzaib , "An Empirical Analysis of a Process Industry to Explore the Accident Causation Factors: A Case Study of a Textile Mill in Pakistan" Journal of Basic & Applied Sciences, 14, 72-79, 2018
  52. Mudassar Rauf, Mirza Jahanzaib, Haris Aziz, "Modified NEH Algorithm for Multi-Objective Sequencing in Mixed-Model Assembly Lines" Mehran University Research Journal of Engineering & Technology Vol. 37, No. 3, 545-552 July 2018DOI: 10.22581/muet1982.1803.09
  53. Muhammad Asad Ali, Mirza Jahanzaib, Muhammad Ahsan Ul Haq, "Analyzing the Effect of Squeeze Casting Process Parameters on Mechanical Properties of Overcast Al-Alloy joints using RSM" Journal of Engineering and Applied Sciences (JEAS) Vol 36 No 2 (2017)
  54. Muhammad Umar* and Mirza Jahanzaib, "Prioritizing Factors of Entrepreneurial University to Inculcate Enterprise Formation Pursuit Among University Graduates Using Analytical Hierarchical Process" Journal of Basic & Applied Sciences, 13, 534-544,2017
  55. Junaid A. Qayyum , Khurram Altaf , Ahmad Majdi Abdul Rani , Faiz Ahmad and Mirza Jahanzaib, "Performance Of 3D Printed Polymer Mold For Metal Injection Molding Process". ARPN Journal of Engineering and Applied Sciences VOL. 12, NO. 22, NOVEMBER 2017
  56. Khurram Altaf , Ahmad Fahim Zulkarnain, Junaid A. Qayyu and Mirza Jahanzaib, "Optimum Build Orientation Of 3D Printed Parts For A Robot Gripper" ARPN Journal of Engineering and Applied Sciences VOL. 12, NO. 20, OCTOBER 2017
  57. Asad Ali, Mirza Jahanzaib, Muhammad Ihsan Ul Haq, ‘Analyzing the Effect of Squeeze Casting Process Parameters on Mechanical Properties of Overcast Al-Alloy Joint using RSM, Vol 36 No 2 (2017): Journal of Engineering and Applied Sciences (JEAS), Online 2018
  58. Kh Altaf, Mirza JahanzaibConcept Design and Prototyping of Integrated Cooling System for the Crank Rocker Engine using Additive Manufacturing technologies,
  59. Mudassar Rauf, Mirza Jahanzaib, Haris Aziz ‘Modified NEH Algorithm for Multi-Objective Sequencing in Mixed-Model Assembly Lines’, accepted for publication in Mehran University Research Journal of Engineering & Technology, Sept 2017
  60. Usama Qazi, Mirza Jahanzaib, “Development of Wholesale Electricity Market: A Way Forward for Efficient Power Sector in Pakistan”, Vol. 22, No. 2, 2017, Technical Journal UET. (Y-category)
  61. Farhaj Ishtiaq, Mirza Jahanzaib, ‘Impact of Project Complexity and Environmental Factors on Project Success: A Case of Oil and Gas Sector of Pakistan’, Journal of Basic & Applied Sciences, 2017, 13, 351-358 (Z- Category)
  62. Farhaj Ishtiaq, Mirza Jahanzaib, “Ranking and sensitivity analysis of key factors for successful project management performance: An application of AHP for Oil and Gas sector”, Vol. 6, No 2, Pakistan Journal of Engineering, Technology & Science, PJETS, 2017 (Z- Category)
  63. Imran Masood, Mirza Jahanzaib, and Wasim Ahmad, ‘Sustainability Assessment for Dry, Conventional and Cryogenic Machining in Face Milling of Ti-6Al-4V, Accepted in Mehran University Research Journal of Engineering & Technology, May 2016, (X-CATEGORY)        
  64. Hafiz Muhammad Khurram Ali, Mirza Jahanzaib, Javed Akhtar, Amir Sultan, Bakht Bahadur Rana, Adeel Ahsen, ‘Cement Industry Preferences for Captive Power Plants in Perspective of Current Energy Crisis in Pakistan’, Journal of Faculty of Engineering and Technology, University of the Punjab, 2016, (Y-category)                                                                                        
  65. H. M. Khurram Ali, M. U. Farooq, A. Wasim, M. Jahanzaib, S. Hussain, ‘Leverage of Office Automation in a Public Sector Engineering Organization: Pre And Post Implementation Analysis’, Pakistan Journal of Science, 2016 (X-CATEGORY)                                                            
  66. Zain Ul Abidin, Hafiz Muhammad Khurram Ali, Salman Hussain, Ahmad Wasim, and Mirza Jahanzaib, ‘Supplier Selection in an Industry of Short Life-cycle Products using Bayesian Network      Analysis’,  Pakistan Journal of Science, 2016 (X-CATEGORY)                                  
  67. M. Jamil, S. Sarfraz, M. Jahanzaib, ‘Investigation of Temperature in Orthopedic Drilling using Response Surface Methodology’, Pakistan Journal of Science, Vol. 68, No. 2, June, 2016 (X-CATEGORY)                                                                                                                                           
  68. Umar Draz, Mirza Jahanzaib, Ghulam Asghar, ‘Identification of Determinants for Globalization of SMEs using Multi-layer Perceptron Neural Networks, Mehran University Research Journal of Engineering & Technology, Vol 35, No 1, pp 39-52, Jan 2016 (X-CATEGORY)                                                                                                                                                    
  69. Z. Farrukh , S. Hussain , M. Jahanzaib, A. Wasim, H. Aziz, ‘A Simple Multi-Criteria Inventory Classification Approach’, Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan, Vol 20, No IV-2015, Y-CATEGORY)                                                              
  70. G. Asghar, W. Safeen, M. Jahanzaib, An Alternate Model of Aggregate Production Planning for Process Industry: A Case of Cement Plant, Technical Journal UET Taxila, Vol. 20(SI) No.II(S)-2015 (Y-CATEGORY)                                                                                                                  
  71. I.Tahir, J. Mirza, A. Wasim, S. Hussain, An Integrated Approach of Value Stream Mapping and Simulation for Process Improvements, Technical Journal UET Taxila, Vol. 20(SI) No.II(S)-2015 (Y-CATEGORY)                                                                                                                  
  72. R.Anwar, M. Jahanzaib, G.Asghar, A. Wasim, S.Hussain, ‘Optimization of Surface Roughness for Al-Alloy 7075-T in Milling Process, Technical Journal UET Taxila, Vol. 20(SI) No.II(S)-2015 (Y-CATEGORY)                                                                                                                   
  73. M. Khurram Ali, Khalid Akhtar, M. Jahanzaib, ‘A Hybrid Multidimensional Approach to Select a Country for Global Cement Plant Location’, Mehran University Research Journal of Engineering & Technology, vol 34, issue 2, April, 2015. (X-CATEGORY)                                         
  74. Muhammad Ashraf, Mirza Jahanzaib, Wasim Ahmed, Salman Hussain, “Production Planning and Control of Assembly Process for the High Tech Products”, Technical Journal UET Taxila, 2014, Vol 19, No 1, pp 51-61 (Y-CATEGORY)                                                                
  75. Muhammad Khurram Ali, Rafi Javed Qureshi, Mirza Jahanzaib, “Selecting Facility Location Using Hybrid Methodologies in Global Perspective: A Case of Cement Plant” Journal of Engineering and Applied Sciences (JEAS), University of Engineering & Technology Peshawar, Vol: 32 No. (1), July-December 2014 (X-CATEGORY)                                                    
  76. M. Imran, N. Iqbal, M. Jahanzaib, Minimization of Intercellular Movements in Cellular Manufacturing System Using Genetic Algorithm, Technical Journal, University of Engineering and Technology, Taxila,Vol 19, No2, pp.16-22, 2014 (Y-CATEGORY)                    
  77. A. Ali, M Jahanzaib, H. Aziz, Manufacturing Flexibility and Agility: A Distinctive Comparison, The Nucleus 51, No.3, pp.381-386, 2014 (Y-CATEGORY)                                                                               
  78. G. Asghar, M. Jahanzaib, M. Nouman, Leverage of Advanced Manufacturing Effectiveness: A Case of Apparel Industry, Technical Journal, University of Engineering and Technology, Taxila, Vol 19, No 3, pp.18-26, 2014 (Y-CATEGORY)                                                                           
  79. Kamran Gohar, Mirza Jahanzaib, Khurram Ali, Consumer Preferences for Selection of Solar System for Domestic Purposes in Urban Areas, Pakistan, Mehran Journal of Engineering, Volume33, No4, pp.441-448, Oct 2014 (X-CATEGORY)                                                                    
  80. Z.U. HASSAN, M.M.I. HAMMOUDA, S. KHUSHNOOD, K. AKHTAR, M. JAHANZEB and A. MALIK, “Experimental and Numerical Analysis of Fretting Fatigue Crack Initiation in Dovetail Joint for Aero Engine Compressor”, The Nucleus 49, No. 4 (2012) 255-264, (Y-CATEGORY)  
  81. N. Ahmad.,M. Jahanzaib., R. Javed, “Mathematical Modeling of Hybrid Production Shop Scheduling Engaged in the Manufacture of Multi Processing Single Item / Single Product”.Technical Journal of University of Engineering & Technology, Taxila, Pakistan, 2003                                                                                                                                                              
  82. M. Jahanzaib., N. Ahmad., R. Javed, “Knowledge Based Methodology for the Routing Planning Exercise of Automated Guided Vehicles System”. Technical Journal of University of Engineering & Technology, Taxila, Pakistan, 2003                                                                        
  83. M. Jahanzaib., N. Ahmad., R. Javed, “A Rule Based Layout Classification Scheme of Automated Guided Vehicles System”.Technical Journal of University of Engineering & Technology, Taxila, Pakistan, 2001                                                                                                        
  84. N. H. Rama, Muhammad T. Hussain and M. Jahanzaib, ‘Electron Ionization Mass Spectrometric Studies of 2-(2'-Oxoethylphenyl/4'- hlorophenyl) benzoic acids and their Methylester Derivatives’, Acta Scientia, 1997,Volume 7, issue 1,  pp-85-90                                 
  85. N. H. Rama, Muhammad T. Hussain and M. Jahanzaib,Electron Ionization Mass Spectrometric Studies of 2-(2'-Pyridyl-, 3'-pyridylmethyl)-2H-benzo[e]-1,2,3,4-thiatriazin-1,1-dioxides and 2-Benzyl-2,3-dihydro-1,2,3,-benzothiadiazole-1,1-dioxide, Acta Scientia, 1997,Volume 7, issue 1,  pp- 73-80                                                                                                          
  86. N. H. Rama, Muhammad T. Hussain and M. Jahanzaib,Characterization of a-Cleavage Products of Bis-(3-isopropyl-6,8-dihydroxyisochroman-5-yl)methane and 3-Isopropyl-(6,8-dimethoxyand 6,8-dihydroxy)iso-chromans under Mass Spectrometric Studies’, Acta Scientia, 1997,Volume 7, issue 2,  pp-57-62                                                                                           
  87. M. Jahanzaib., N. Ahmad., Dr. K. Akhtar, “Volume versus Variety Flexibility in Discrete Parts Manufacturing Organizations in Pakistan”.The Pakistan Engineers, Journal of the Institution of Engineers, June 2005                                                                                                       
  88. N. Ahmad., M. Jahanzaib., R. Javed, “Experimentation Investigations of Hybrid Production Flow Engaged in Gun Barrel Manufacture”.Technical Journal of University of Engineering & Technology, Taxila, 2006                                                                                                                                                                                                                                                          

External Research Grants:

1.      Development of Intergrated Management System for Engineer to Order Production, project under process with industry

An Investigation of Safety Climate in Science Labs in Pakistani Universities, Grant No 3483, 1 Million, HEC-2015, Pakistan

2.      Design Manufacturing and Performance Evaluation of Solar Cooker using parabolic Through Collector (PTC) in Asian Environment, Grant No 3556, 1.6 Million, HEC-2016, Pakistan

3.      A grant for the development of prototyping CNC drilling press from NESCOM BSc project 2005. The machine is in Machine tool laboratory of MED, UET, Taxila.

5.      Won a grant for the development of low cost SCARA pick and place Robot with BSc students from NESCOM. The Robot is operational in Chakwal campus.

 

INTERNAL RESEARCH GRANTS (DIR ASR&TD)

6.      Optimizing design parameters affecting the casting process of aluminum alloy with a grant of 0.574 Million (Faculty Research Grant, May 2013 to June 2014)

7.      Development of wall climbing robot with transition ability for non-destructive testing of steel tanks (Faculty Research Grant Rs 0.619 Million, 2014)

8.      Integrated Design of Cell Formation and Cell Layout to minimize Energy Consumption with Minimum Make-span (Faculty Research Grant Rs.0.50 Million, 2014)

9.      Identification of process parameters’ influence on friction stir welding (Rs. 0.374 Million, 2014-15)

10.Optimization of cutting tool wear and surface roughness for turning CLARM HBR (30NiCrMoV14) based on RSM (Rs.0.150 Million, 2015).

11.Design, Analysis and Fabrication of Rolling-ball tool for Incremental Sheet Metal Forming (Rs. 0.50 Million, 2015-16)

12.Development of Novel Dry Scalp EEG Measuring Electrode for Brain Activity Monitoring 0.5 Million

13.Empirical investigation of Orthopaedic drilling, 0.22 Million

14.Optimization of process parameters in Gas Tungsten Arc Welding (GTAW) using Response Surface Methodology 0.5 Million

15.Optimizing staff schedule in light of patient satisfaction for the whole outpatient block in civil hospital of Pakistan 0.55 Million

16.Analysis of surface Roughness for minimum quantity lubricant (MQL) in grinding Process 0.38 Million

17.Mechanical and Micro-structural evaluation of Squeeze Cast Aluminum Copper Alloy using Response Surface Methodology 0.49 Million

1. Dean Faculty of Industrial Engineering, 4th April 2017 to date

2. Convenor, Outcome Based Education (OBE) for all Engineering Programs of UET Taxila

3. Chairman Industrial Engineering departmentfor BSc, MSc and PhD degree program under Faculty of Industrial Engineering from August 2012 to 2015 and 2015 to 2018.

4. Chairman Industrial Engineering department to run MScdegree program in Engineering Management (MSc Engineering Management Program only) from April 2008 to 27th September 2009.

 5. Editor of Special Issue, Industrial Engineering and Engineering Management, Technical Journal, UET, Taxila, Vol. 20(SI) No.II (S)-2015

6.      Heading team leader for OBA accreditationsystem in IED, UET Taxila

7.      Member Finance Committee of UET, Taxila from June 2014 to 2017

8.      Member Affiliation Committee to review BSc/MSc programs of affiliated institutesMarch 2016- March 2019.

9.      Member Disciplinary Committee from January 2016- 2019.

10.      Member board of Advanced Studies Research & Technological Developmentfrom MED for a period of three years (2004 to 2007) and from Industrial Engineering Department (2015 to 2018)

11.      Headed Development of Ergonomics laboratory in Industrial Engineering department for carryout practical.

12.Strengthened workshop with a grant of 2.5 Millionto retrofit with state of the art equipments

13.Advisor Post Graduate Studies for Industrial & Manufacturing Engineering in Mechanical Engineering Masters program (2003 to 2009)

14.Lead for Establishing ‘Advanced Manufacturing System Lab’ financed by HEC (Higher Education Commission) for 40.0 Million-Pak Rupee in Meachanical Engineering Department and served as an incharge of the lab. The equipment includes state of the art manufacturing systems like Rapid Prototyping Machine (RPM) Industrial Robot and manipulator for simulation, Quality Control Systems, CNCs, Virtual Reality Software, Computer Integrated Manufacturing (CIM) with AS/RS, and AGVs etc with centrally controlled systems (2002 to 2004).

15.Member Young Engineering Development Committee, PEC 2015 to date

16.Patron student sports club from Dec 2013 to 2016

17.Advisor Student Welfare Society (SWS)for scholarships of needy students under umbrella of Directorate of Students Affairs (2004 to 2006).

18.Member library Committeefrom Mechanical Engineering Department for selection of books, annual reviewing and budgeting (2006 to Aug 2009).

19. Acting Chairman Mechanical Engineering Department during short periods from 2007-2008

20.Member International Ranking Committee in Qassim University, College of Engineering (Sep 2010 to date). The objective is to develop framework/policies for becoming top 500 in universities.

21.Core Team member for development of curriculumfor MSc Mechanical and Manufacturing Engineering Program in College of Engineering, Qassim University, KSA.

21.Acted as head of committee for Technical Resource Committee for reviewing laboratories up-gradation in QEC, KSA (Oct 2009 to Feb 2010), Worked as a member in Human Resource Committee in the College of Engineering, Mechanical Engineering Department (2009 to 2011), Acted as member in Subject Committee for Production/Manufacturing and Materials related courses (Oct 2009 to date), Worked as member of Research Committee for developing of framework for research and its implementation (Feb 2010 to July 2010)

22.Academic Supervisor for COOP training program in College of Engineering (Supervised six COOP students in Johnsons Control, Saudi Airlines, and Saudi ARAMCO, SABIC), Acted as a Supervisor in SDP (Senior Design Project) for undergraduate students (March 2010, 2011)

1. Working on Colloborative Project 

2. Product development Center

22 years teaching

  • As Professor, IED, UET Taxila (March 2015 to date)
  • As Associate  Professor Ind Engg Dept, UET, Taxila (June 2012 to 29th March 2015)
  • As Associate Professor Mechanical Engineering (March 2008 - Sept 2009), UET Taxila and Mechanicl Engineering Department, College of Engineering Qassim, University, KSA (Oct 2009 to June 2012)
  • As Assistant Professor Mechanical Engg Dept, UET Taxila (June 2003 to 4th April 2008) 
  • As Research Associate Mechanical Engg Dept, UET Taxila ( Jan 98 to May 03)

 Industry 

   Approx. 1 year as Maintenance Trainee in Power house/processing deptt

   Three years Industrial experience during PhD (in automobile discrete parts industry)

Providing service to community in form:

1. Streamlining Production Operations with Standard Layouts and Time studies

2. Cost Effective solutions to improve processes with least Cost

3. Optimum Seeking Process Parameters to enhance Production of Manufacturing Processes

4. Energy Models for Generation, Transmission and Distribution

1. Professional Member Pakistan Engineering Council PEC 

2. Member Industrial and System Engineering IESE

1.   (Undergraduate courses):

Majors:

Manufacturing Processes (4th semester),

Materials Engineering (3rd semester),

Metrology and Quality Control (5th semester),

Mechanical Engineering Drawing(3D) using Solid works (4th semester),

Production Automation (6th semester),

Computer Integrated Manufacturing (8th semester),

Metal forming and Cutting Analysis (7th semester),

Engineering Drawing & Graphics (2nd semester),

Machine Design & CAD-I (4th semester),

Machine Design-II (6th semester),

Basics of Engineering Technology (GE) (3rd semester)

Electives:

Engineering Economics & Optimization,

Introduction to Mechatronics,

Industrial Engineering-I & II,

Mechatronics Components,

Instrumentation & Process Control

 

2.   (Graduate courses):

Mechanics of Manufacturing Processes,

Design of Advanced Manufacturing Systems,

Simulation of Industrial Systems,

CAD/CAM,

Process Planning,

Advanced Manufacturing Design Techniques (MSc EME College NUST),

Engineering Economics Decision Analysis (Engineering Management),

Principles of Engineering Management (Engineering Management),

Simulation and Modeling (PhD level course)

Multi Criteria Decision Making (PhD Level course)

University of Engineering and Technology Taxila

  1. Mechanical Engineering
  2. Industrial Engineering
  1.  CONFERENCES (Participated/PRESENTED):                                                    

  2. Lei Yue, Zailin Guan, Jinsong Luo, Ullah Saif and Jahanzeb Mirza, “A drum-buffer-rope based heuristic for rolling horizon order release and mixed model scheduling in flexible manufacturing system”, International Conference on Computers and Industrial Engineering, Portugal, 11-13 October, 2017.
  3. Mudassar Rauf, Shoaib Sarfraz, Essam Shehab, Saima Javeed, Mirza Jahanzaib, ‘Multi-Objective Optimization for Models Sequencing in Mixed-Model Assembly Lines’, Advances in Manufacturing Technology, Volume, 6, Published 2017, Pages:96 – 101, DOI:10.3233/978-1-61499-792-4-96, UK, September 2017
  4. Khurram Altaf, Masri Baharom, A. Rashid A. Aziz, Junaid A. Qayyum and Mirza Jahanzaib ‘Concept Design and Prototyping of Integrated Cooling System for the Crank Rocker Engine using Additive Manufacturing technologies’, International Conference on recent advances in Automotive Engineering and Mobility Research, 8-10th August 2017, Malaysia
  5. Khurram Altaf, Ahmad Fahim Zulkarnain, Junaid A. Qayyum, Mirza Jahanzaib, ‘Optimum Build Orientation of 3D Printing Parts for a Robot Gripper, International Conference on recent advances in Automotive Engineering and Mobility Research, 8-10th August 2017, Malaysia
  6. M. H Aziz, Summyia Qamar, Chanchal Saha, SaifUllah Khan, Mirza Jahanzaib, ‘Customer Orders Prioritization Using TOPSIS in Multi Business Channel Environment’, IEOM  (Industrial Engineering and Operation Management) Kuala Lumpur, 8-10 March 2016        
  7. M. Jahanzaib, ‘Selection of Solar System for Domestic Purposes in Urban Areas: From Consumers Perspective, 2nd International Conference on Power Genration Systems and Renewable Energy Technologies (PGSRET) 10-12 June 2015,IIU, Islamabad, As KEY NOTE SPEAKER                                                                                                                                                    
  8. Muhammad Khurram Ali, Rafi Javed Qureshi, Shahab Khushnood, and Mirza Jahanzaib, "Analytical Hierarchy Process(AHP) based Decision Support System in Global Cement Plant Location; A case study," in Proceedings of the 1st IEEE International Conference on Engineering Management (ICEM-2012), NUST College of E&ME, Rawalpindi, Pakistan, Jan, 2012                                                                                                                                                      
  9. Arshed. M., M. Jahanzaib, “Simulation Based Decision Support System”(SBDSS) for the Vehicles Repair and Maintenance in Dynamic Business Environment” Institute of Industrial Engineering, USA, IEOM – January 2009                                                                                              
  10. M. Jahanzaib., Dr. Khalid Akhtar, and S. A. Masood, “Selecting Strategic Factors Influencing Performance of Manufacturing Firm Using Analytical Hierarchal Process”,Presented in National Conference on Global Conference 2009, FAST, held on 24-25 July 2009, Karachi  
  11. M. Jahanzaib., Dr. Khalid Akhtar, “Prioritizing Key Performance Indicators in Nano-High Tech Products using Manufacturing Simulation, (Presented in 8th National Research Conference (NRC) held on 29th January 2009,SZABIST,  Islamabad)                                        
  12. M. Jahanzaib., Dr. Khalid Akhtar, “Characterization of Performance Measures for Low to Medium Volume- Low Variety Manufacturing Environment in the wake of WTO Scenario”. 16th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM-2006), June, Limerick University, Ireland. Covered in ISI web of Knowledge                  
  13. M. Jahanzaib., Dr. Khalid Akhtar, “On Testing Manufacturing Strategies for Coping with Low to Medium Production Volumes- Very Low Variety Manufacturing Environment for Automobile Industry of Pakistan”. 6th Asia Pacific Industrial Engineering & Management Sciences conference, December 4-7, 2005, Manila, Philippines .ISBN: 962-8286-11-0          
  14. M. Jahanzaib., Dr. Khalid Akhtar, “Coping with Low Production Volumes and Very Low Variety for Pakistani Automobile Industry - A Normative Model”.15th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM- 2005), July 18-20, 2005, University de Deusto, Bilbao, Spain.ISBN:84-7485-991-3. Covered in ISI web of Knowledge                                                                                                                                                   
  15. Dr. Khalid Akhtar., M. Jahanzaib, “Production Management for the High Tech. Products – A Manufacturing Simulation Based Approach”. 14th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM- 2004), July 12-14, 2004, Ryerson’s University, Toronto, Canada .ISBN:0-662-37218-2. Covered in ISI web of Knowledge                   
  16. M. Jahanzaib., M. H. Sahir, “A Hybrid Approach to the Routing Design Problems of Automated Guided Vehicles System”.1st International Workshop on Emerging Technology on Manufacturing organized by NUST & COMSTECH OIC, July 10-12, 2003, Islamabad, Pakistan                                                                                                                                                        
  17. Rafi Javed Qureshi Nabi Ahmad, Mirza Jahanzaib, ‘Experimental Investigations for Productivity Improvement of a Hybrid Production Flow Line: A Case Study”.ICPQR International conference, held in IIT Dehli, India, Dec 12-15, 2005                                               
  18. M. Jahanzaib., Dr. Khalid Akhtar, “Prioritizing Key Quality Indicators for Engineering Education using Analytical Hierarchical Process (AHP): Case Study”.Proceedings of Pakistan’s 4th National Conference on Quality Assurance in Education (NCQAE) Lahore- September 17-18, 2005.                                                                                                              
  19. M. Jahanzaib., R.A. Pasha., Zahid Suleman, “Cogeneration an Opportunity for Industrial Energy Saving”, 1st International Conference on Power Generation Systems and Renewable Technologies pp 403-409, Nov 29~Dec 02, 2010, Islamabad

Some Trainings...

1.      Three months course on AutoCAD organized by Jan Computers, Rawalpindi, 1998.

2.      Two days workshop on networking essentials organized by Electrical Engineering Department, UET, Taxila, 2002.

3.      Two days workshop on Emerging Technology on Manufacturing, organized by NUST & COMSTECH OIC, 2003, Islamabad (Part of paper presentation).

4.      One week course on Solid Edge organized by Solid works, Islamabad 2004.

5.      One day visit to Design/Fabrication/Production of Bombardier Aero plane, Toronto, Canada, 2004 (Part of Conference).

6.      One day workshop on National Productivity organized by NPO, Lahore, Nov 2005.

7.      One day workshop on Environmental management, Islamabad, 2004.

8.      One day presentation/visit for Planning and Scheduling of FORMULA-I racing, Bilbao, Spain 2005(Part of Conference).

9.      Two days workshop on Quality of Education, organized by PIQC, Lahore, 2005.

10.One week VR training on CAD and CAM installation/interfacing/Designing and Manufacturing organized by Den ford Co, UK 2005.

11.Two weeks training on CIM organized by Intellitek USA Co. 2005

12.One day on hand training for use of Robotics manipulator, Taxila, 2005.

13.One week visit of SIMTOS, Machine Tools Manufacturers show held in Seoul, Korea, April 2006.

14.One day visit of Daewoo Plant producing 2.0 million cars per year, Korea, 2006.

PhD ENGINEERING:

  1. Investigation of Work Surface Integrity and Process Optimization in Electrical Discharge Machining, (Completed), Engr. Muhammad Azam, 13F-UET/PhD-IE-03
  2. Surface Finish Optimization in Face Milling Grade-5 Titanium Alloy for Sustainable Manufacturing, (Completed), Engr Imran Masood, 10/14-UET/PhD-IE-05
  3. A Framework for the Assessment of Electricity Reforms for an Efficient Power Sector, (Completed), Engr. Osama Qazi, 13F-UET/PhD-EM-01
  4. Process Modeling and Multi Response Optimization in Wire Cut Electrical Discharge Machining, (in progress), Engr. Junaid Ali Abbasi, 13-UET/PhD-IE-02

MSc Engineering:

  1. Mechanical and Micro-structural evaluation of Squeeze Cast 2024 Aluminium Alloy using Response Surface Methodology, Engr Shaoib Sarfraz, 2014-IED-MSc-IE/FT-02
  2. Scheduling of Parts in Manufacturing Cell to Optimize WIP and Machine Utilization, Engr. Qazi Salman, 2014-IED-MSc-IE/FT-02
  3. Investigation of the Effects of parameters on Surface Roughness and white layer formation in EDM, Engr M Sarosh Arshad, 2014-IED-MSc-IE/FT-09
  4. Integration of Simulation and Heurisitc Approach to Minimize the Flow Time and Tardiness of Machine Cell, Engr. Jabir Mumtaz, 2014-IED-MSc-IE/FT-02
  5. A Framework for Outcome Based Accreditation: Continuous Quality Perspective, Engr. Tooba Sikander, 2014-IED-MSc-EM/FT-02
  6. Parameters optimization for cutting thin SS 304 sheet to manufacture cordial stent using CNC Nd-YAG Laser with G-M Codes, Engr. Haseeb Mehmood, 10-IEMS-IME-10
  7. Development of inventory management model for small and medium enterprise, Engr Zeeshan Farrukh, 2013-IED-MSc-EM/FT-01
  8. Role of organizational behavior (OB) to enhance productivity in a public sector enterprise, Engr. Javed Iqbal, 11 – MS –EM/PT – 08
  9. Modeling of Y-shape aviation hydraulic pipe connectors by the application of bulging techniques, Engr. Kamran Saeed, 11-MS-IME-07
  10. An ant colonial optimization approach for no-wait permutation flow shop scheduling, Engr Ahtisham Shad Khan, 11-MS-IME-06
  11. An artificial neural networks (ANN) with back propagation for inspection criterion of wing structures, Engr. Sagheer Abbas, 11-MS-IME-02
  12. A genetic algorithm based schedule optimization of a job shop with parallel resources, Engr. Zawar A Nawaz Bhatti, 11-MS-IME-01
  13. Quality function deployment for utility service: A case study of electricity distribution company IESCO, Engr. Madiha Idrees, 13-IED-MSc-EM/FT-02
  14. Cost minimization of value added WIP in cellular manufacturing system using genetic algorithm, Engr. Muhammad Imran, 13-IEMS-MS/FT-IE-07
  15. Effects of variable cooling rate on mechanical properties of die-cast Al-Alloy, Engr Ghulam Asghar, 13-IEMS-MS/FT-IE-03
  16. Optimization of temperature distribution along cutting tool during orthogonal metal cutting, Engr. Hassan Farooq, 12-IEMS-MS/FT-IE-05
  17. Agile manufacturing in discrete parts manufacturing SMEs, Engr. Tassawar Sharif, 12-IEMS-MS/FT-IE-03
  18. Reconfiguration of manufacturing system by integrating value stream mapping and simulation, Engr. Tahir Iqbal, 12-IEMS-MS/FT-IE-01
  19. Corrosion management on structural joints of aircrafts to enhance its structural integrity and overall service life, Engr Saeed Khan, 09-IEMS-IME-11
  20. Modeling of weld bead geometry using plasma arc welding, Engr. M. Adnan Mirza, 10-IEMS-IME-07
  21. Surface roughness modeling using RSM for HSLA steel by coated carbide tools, Engr. M. Azam, 10-IEMS-IME-01
  22. Response surface methodology (RSM) for Optimization of Milling process, Engr M. Rizwan Anwar, 09-MS-IME-04
  23. Identification of Determinants for Globalization of SMEs in Pakistan Using Multilayer Perceptron Neural Networks, Engr. Umar Daraz, 10-IEMS-IME-01
  24. Consumer Preferences for Selection of Solar System for Domestic Purposes in Urban Areas, Engr Kamran Gohar, 09-MS-IME-01
  25. Analysis of Line balancing technique in Manual Assembly Operation, Engr. Muhammad Ashraf, 05-MS-IME-05
  26. Retrofitting From Conventional To Mass Customization System, Engr. M. Rizwan Khan, 07F-MS-IME-13
  27. Design And Analysis Of Repair And Maintenance: A Decision Support System, Engr Arshad Mehmood, 05-MS-IME-01
  28. Artificial Neural Nets Assisted Prediction Of Weld Bead Geometry In Gas Tungsten Are Welding (GTAW) Of High Strength Low Alloy (HSLA) Steel, Engr. M. Saeed Khan, 06-MS-IME-10
  29. Formation Of Manufacturing Cell In GT Using Genetic Algorithm Approach, Engr. M. Shahid Nadeem, 05-MS-IME-05
  30. Design For Six Sigma Approach For Improvement Of Product Development, Engr. Umer Jamil, 04-MS-IME-04
  31. Lean Scheduling In High Variety/Low Volume Environment, Engr. Aftab Ali Haider Janjua, 04-MS-IME-14,
  32. Improvement In Subsisted Product Delivery Process Of A Manufacturing Organization Using Concurrent Engineering Approach, Engr. Talat Aslam, 04-MS-IME-02
  33. Simulation Based Planning And Control Model of Fuel Induction Pump Components Used in 502 WKSP, Engr. Ishtiaq Haider, 03-MS-IME-01,
  34. Design and Implementation of Six Sigma In Discrete Part Manufacturing Organization in Pakistan, Engr. Amjad Mahmood, 03-MS-IME-11,
  35. Analyzing The Effectiveness Of Critical Chain Method In Project Scheduling, Engr. Ali Imran Khan, 03-MS-IME-02,
  36. Development of Integrated Manufacturing Management System For Make To Order Batch Production Environment, Engr. Sajjid Hussain, 03-MS-IME-08,

Business Process Value Analysis For Make To Order Batch System Using Analytical Hierarchical Process, Engr. Shahid Rasheed, 03-MS-IME-13

Some workshops from OBE perspectives are:

  1. One Day, Teaching and Learning focused on Outcome Based Education (OBE) held on Jan 10th 2015, at Military College Risalpur, January 2015
  2. Two Days (1 CPD) on Outcome Based Education (OBE) and Implementation held in UET Taxila Feb 6-7, 2018 by Pakistan Engineering Council, Feburary 2018
  3. One Day Symposium Re-Designing Engineering Education in Pakistan organized by UET Taxila, 19th Oct 2015
  4. Keynote Speaker on Industry 4.0, held on 24-25 April 2018, UET Peshawar, Professional Trends in Industrial & System Engineering
  5. Presented on Professional Ethics organized by Staff development Center, UET Taxila, March 2018

At present 

  1. Five PhD students are working on topics covered under Industrial, Manufacturing, System and Engineering Management Domain
  2. Eight MSc Students on Industrial, Manufacturing, System and Engineering Management Domain
  3. Two groups on BSc Projects

Three Research Groups are functioning

  1. Manufacturing Processes and Automation 
  2. Industrial Systems and Lean
  3. Optimization of Production Systems and Quality